Specs: Partscaster Custom Telecaster HH 2024 Classic Cherry Sunburst Hot Rails Partial Coil Splits

Sdílet
Vložit
  • čas přidán 16. 05. 2024
  • Reverb shop: Search: "Werner Guitars" reverb.com/shop/werner-guitars
    Ebay shop: Search: "WernerGuitars" www.ebay.com/usr/wernerguitars
    Sweetwater Gear Exchange: Search: "Werner Guitars" www.sweetwater.com/used/store...
    Comes with padded gigbag. All parts were bought new and put in the guitar. General specs below, and full description/specs at the bottom.:
    Full-spectrum Resistance 21 ohms to 3 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are "partial" coil splits modeled after PRS "partial" coil splits to retain oomph, output, and tone.
    Switching Positions as Follows:
    1. Bridge (Resistance 8.7 ohms)
    2. Bridge in parallel with Neck (regular Tele position ) (Resistance 5.2 ohms)
    3. Neck (Resistance 12.8 ohms)
    4. Neck in series with Bridge (Resistance 20.9 ohms)
    General Overview
    Okoume Top with High Gloss Polyester Finish on Mahogany body with Top Binding
    Maple Neck with Gloss Vintage Yellow Finish
    Cream Dual Rail Humbucker Bridge Pickup 9k
    Cream Dual Rail Humbucker Alnico 5 Neck Pickup 13k
    Additional position for both pickups in series (Maximum pickup output)
    Humbuckers individually (partial) split
    D'Addario Nickel Wound XL 10-46 EXL110-10P
    All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
    Weight of the guitar is 7.6 pounds
    Body
    Okoume Top with High Gloss Polyester Finish on Mahogany body with Top Binding
    Neck
    Scale length 25.5"
    Maple Neck with Gloss Vintage Yellow Finish. 22 medium jumbo frets. 12" radius (1st fret 0.83", 12th fret 0.96")
    Hardware
    Gold Wilkinson Bridge with upgraded brass, threaded, compensated saddles and option for top-load
    Gold knobs and Cream low-profile switch tip
    Gold output jack plate
    Gold strap pin buttons
    Gold Wilkinson Locking tuners
    Gold neck plate
    Genuine Fender gold string ferrules
    Gold easy-glide string trees
    Electronics
    Cream Dual Rail Humbucker Bridge Pickup with Gold Cover 9k (Exact measure 8.7 ohms).
    Cream Dual Rail Humbucker Alnico 5 Neck Pickup 13k (Exact measure 12.8 ohms).
    500K Volume/Tone Potentiometer Push/Push Audio Taper
    Oak Grigsby 4-Way Blade Switch
    .022uf Mallory 400v Tone Capacitor
    Additional position for both pickups in series (Maximum pickup output)
    Humbuckers individually (partial) split
    Pure Tone Gold Mono output Jack
    All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
    Detailed Switching Positions as Follows:
    1. Bridge (Resistance 8.7 ohms)
    with (partial) coil split (tone knob only) 5.8 ohms
    with (partial) coil split (tone & volume knob) 3.5 ohms
    with (partial) coil split (volume knob only) 4.3 ohms
    2. Bridge in parallel with Neck (regular Tele position ) (Resistance 5.2 ohms)
    with (partial) coil split (tone knob only) 4.0 ohms
    with (partial) coil split (tone & volume knob) 3.4 ohms
    with (partial) coil split (volume knob only) 4.2 ohms
    3. Neck (Resistance 12.8 ohms)
    with (partial) coil split (volume knob only) 8.0 ohms
    4. Neck in series with Bridge (Resistance 20.9 ohms)
    with (partial) coil split (tone knob only) 18.2 ohms
    with (partial) coil split (tone & volume knob) 8.2 ohms
    with (partial) coil split (volume knob only) 8.2 ohms
    Full range of resistance:
    20.9 ohms
    18.2 ohms
    12.8 ohms
    8.7 ohms
    8.0 ohms
    5.8 ohms
    5.2 ohms
    4.2 ohms
    3.4 ohms
  • Hudba

Komentáře •