Specs: Thinline Telecaster HH 2024 Gold Lightweight Gilded Headstock Mirrored Pickguard Coil Splits

Sdílet
Vložit
  • čas přidán 6. 09. 2024
  • Reverb shop: Search: "Werner Guitars" reverb.com/sho...
    Ebay shop: Search: "WernerGuitars" www.ebay.com/u...
    Sweetwater Gear Exchange: Search: "Werner Guitars" www.sweetwater...
    Comes with padded gigbag. All parts were bought new and put in the guitar. General specs below, and full description/specs at the bottom.:
    Full-spectrum Resistance 18 ohms to 3 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are "partial" coil splits modeled after PRS "partial" coil splits to retain oomph, output, and tone.
    You have OPTIONS at Werner Guitars. Just message before the sale if you want anything changed about the guitar. (Pickups, hardware, new wiring/signal chain, etc.) You will be notified if the change can be made, time to complete, cost if any, and pictures provided as appropriate. Get the guitar YOU want. Message today!
    Items of Note: Pictures were taken indoors and outdoors to give you an overall view of the guitar. Some pictures have clouds or a hand in the mirrored reflection of the pickguard for display.
    Switching Positions as Follows:
    1. Bridge (Resistance 12.0 ohms)
    2. Bridge in parallel with Neck (regular Tele position) (Resistance 6.3 ohms)
    3. Neck (Resistance 13.1 ohms)
    4. Neck in series with Bridge (Resistance 24.6 ohms)
    General Overview:
    Gold Tight Sparkle Gloss Thinline Mahogany Body with 1/4" Maple Top and Top Binding
    Satin Wenge neck with matching headstock
    DiMarzio Tone Zone Dual Rail Humbucker Bridge Pickup 12k
    Kluson Icon Twin Blade Humbucker Neck Pickup 13k
    Additional position for both pickups in series (Maximum pickup output)
    Humbuckers individually (partial) split
    D'Addario Nickel Wound XL 10-46 EXL110
    All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
    Weight of the guitar is 6.8 pounds
    Body
    Gold Tight Sparkle Gloss Thinline Mahogany Body with 1/4" Maple Top and Top Binding
    Neck
    Wenge Satin Neck & fretboard. 22 medium jumbo frets. 15" radius (1st fret 0.88", 12th fret 0.97")
    Scale length 25.5"
    Matching headstock (Sealed Gilded Gold Foil)
    Hardware
    Gold Wilkinson M-Series Bridge with upgraded brass, threaded, compensated saddles and option for top-load
    Gold knobs and gold switch tip
    Gold output jack plate
    Gold strap pin buttons
    Gold Wilkinson tuners
    Gold neck plate
    Gold string ferrules
    Gold easy-glide string trees
    Gold mirrored pickguard
    Electronics
    DiMarzio Tone Zone Dual Rail Humbucker Bridge Pickup with Gold Cover 12k (Exact measure 12.0 ohms).
    Kluson Icon Twin Blade Humbucker Neck Pickup 13k (Exact measure 13.1 ohms).
    500K Volume/Tone Potentiometer Push/Push Audio Taper
    Oak Grigsby 4-Way Blade Switch
    .022uf 100v Tone Capacitor
    Additional position for both pickups in series (Maximum pickup output)
    Humbuckers individually (partial) split
    Pure Tone Gold Mono output Jack
    All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
    (Detailed) Switching Positions as Follows:
    1. Bridge (Resistance 12.0 ohms)
    with (partial) coil split (tone knob only) 7.9 ohms
    with (partial) coil split (tone & volume knob) 4.1 ohms
    with (partial) coil split (volume knob only) 5.1 ohms
    2. Bridge in parallel with Neck (regular Tele position) (Resistance 6.3 ohms)
    with (partial) coil split (tone knob only) 4.9 ohms
    with (partial) coil split (tone & volume knob) 4.0 ohms
    with (partial) coil split (volume knob only) 4.9 ohms
    3. Neck (Resistance 13.1 ohms)
    with (partial) coil split (volume knob only) 8.2 ohms
    4. Neck in series with Bridge (Resistance 24.6 ohms)
    with (partial) coil split (tone knob only) 20.7 ohms
    with (partial) coil split (tone & volume knob) 8.5 ohms
    with (partial) coil split (volume knob only) 8.5 ohms
    Full range of resistance charted:
    24.6 ohms
    20.7 ohms
    13.1 ohms
    12.0 ohms
    7.9 ohms
    8.2 ohms
    6.3 ohms
    5.1 ohms
    4.0 ohms

Komentáře • 2