How to make your own Mesh grille / badge less grill - $4 DIY - Dirtcheapdaily : Ep.19
Vložit
- čas přidán 26. 07. 2016
- Patreon: www.patreon.com/dirtcheapdaily
In this episode, I'll walk you through every step in turning your stock grille into a slick mesh one!
LET ME KNOW WHAT YOU THINK:
www.surveymonkey.com/r/LSR2FPD
Please follow the above link to take a short 10 question survey to help make dirtcheapdaily even better!
The wire mesh I'm using in this video was purchased at ACE hardware for $3.50. Its a gutter guard made by Ameritech. You can find it in the roofing/gutter area.
If you have a subaru forester or other car with a large grille, you can join two gutter guards together, or buy a different piece of mesh that fits your application better. You can also use expanded sheet metal like I did on my Legacy GT.
Follow the link in the description and stop by my store to pick up dirtcheapdaily stickers, and check out my instagram for daily updates.
Buy #dirtcheapdaily window Vinyls here:
squareup.com/store/number-dir...
Check out my instagram @dirtcheapdaily for daily updates on projects and other tips for doing your own mods!
/ dirtcheapdaily
or check out my Facebook:
/ dirtcheapdaily
or Twitter:
/ dirtcheapdaily_
Music Cred: Doctor Vox - Heatstroke
Doctor Vox - Hero
Doctor Vox - Level Up
Doctor Vox - Radar
EzaOne - Supernova
Welcome to another episode of dirt-cheap daily!
In this episode, I’ll walk you through the steps to make your own badgless grill!
When you’re to this point, you can take the center section and toss it!
Hold onto the subaru emblem of course, but the rest is garbage.
So you should have something that looks like this. Its really rough and there are still chunks of plastic that we want to get rid of.
With the center cut out, the plastic that extends out of the back are really long, so I cut them shorter. I got a little rough and cracked the top edge. Remember to be careful with it until you get your mesh attached as it doesn’t have any support until then.
then I took a file and leveled out all the little humps left by the center section.
After some paint, it turned out looking great! Be sure to check out my spray painting video for some helpful tips to get a perfect finish on your own mesh grille.
The new grill and spruced up headlights do so much for the look of the whole car! Check out my other video to refurbish your headlights too!
Thanks for watching! Check out my instagram for more pics of the finished grill and other slick DIY projects. And don’t forget to stop by my store for dirtcheapdaily stickers. - Auta a dopravní prostředky
You can also use the grill on a bbq to cook shrimp bcuz the shrimp won't fall through, but only in emergencies.
Oh my god I am so glad I came across this video! I've been looking for grills for my 2018 Fusion but they're all so damn expensive! Probably going to buy another OEM grill just in case I completely screw it up. THANK YOU SO MUCH
Thanks for the video looks good and can’t wait to do my grill now
Sub'd , great stuff, can't wait for the turbo build coming up
Pretty cool finished product done with minimal tools. I like it.
I really like his ideas and how easy it is to do. It looks really good
What is this
Nice dyi vid. One easier way would be to use cardboard to make a template and trace it on ur mesh then cut it out. I did that and then I used my router to make a inside lip then used a heavy duty adhesive to glue it in place. Great job on audio and video 👍
what adhesive did u use?
Thanks for the upload! this will be helpful for when I do mine
Its pretty impressive how much you can improve your cars look with just 4 bucks
Nice creative use of available materials. Cheers!
Awesome dude I found some after some people were fixing their house
Great DIY, never thought of that.
I have a 01 Subaru legacy gt limited with the same grill. I have been thinking about doing this for a while or getting a mesh grill but they are like $100!! I am definitely going to do this now. Thought it was funny that I have the same drill and some fabric seats sitting in my garage witch are going in the legacy as they have way better support for cornering.
At first I saw the bag of zip ties and i was like: there’s no way that’s going to work well… then it did lmao, surprisingly great results
I just want to say that you have beautiful lawn and very relaxing work place while doing this project :-)
This has to be the most wholesome and nicest reply I've ever read on CZcams! Kudos sir!
Man I watched this video 6 years ago and made a grill for my WRX , it wasn't great but it worked , here I am 6 years later making one for my RS unintentionally using the same video 😂
Mesh clipping montage face GO! 8:20
Hey man well done. Thanks for the input. I just bought a Hyundai Genesis r-spec and it's totally boss. I need a grill that will reflect that so now -- I'll make one!
My hood flew up on the freeway yesterday and smashed my grill on my black infiniti g20 I went to ace hardware found this same mesh got tin snips and fixed it right away and had extra to cover up my bumper side panels too!
holy shit that's a lot of work, some blood, some zip ties, custom cutting ... I love it, but hate it at the same time man! no duct tape, so we're all good, nice vid :D
Cutting with a dremel would be way easier
Not dirt cheap tho
Nice informative vid
Man get ur ass back on CZcams when u gonna put out a new video
that actually turned out pretty sick nice job man
thanks!
Cool video, thx! Here’s a tip for what I used to cut my grill out; use an electric jigsaw next time like I did... what a fine tooth blade. Cuts it like butter
Annndddd.... if I kept watching before I commented..... a jigsaw is what you used.... ok, carry on then... lol
Very nice and useful Thanks
Great idea!
Good job!
Cool vid!
good job bro it looks amazing
+Dirtcheapdaily this is and awesome grill and they always give a better look to cars, even trucks, im doing this for my silverado, good video by the way!!👍
Great job. What store do you bought the mesh from?
Great job n video what Sand paper u use to sand the Chrome
One of my grill inserts for my dodge nitro is broken, I wonder if it will work🤔 to change the entire look while at it
LMAO 5 :40 sounds like an rc gas car driving by Hahaha
I was going to say that looks ghetto AF... but then I saw the rest of the car. Now the grille looks pretty upscale by comparison.
Michael Newton 😂😂😂
Lmaoo
😳😭😭😭😭
Ohhhhhhh I'm fuckin dead 💀💀💀😭😭💀
Lolol hater
Thank you
Hell yeah..I like that
Dude, is that a 24bikes LeToy in the background with some Stratos SuperSix forks?
Thats dope, ima do my Mercedes grille
Really great video tutorial :)
Hi Man. In your second gen legacy how you attach the mesh in the middle vent of de bumper? (Just where de frontal IC usuly is disposal) Sorry the pour gramma. I'm from Brazil
When will you show us how to build a convertible?
Effort : Result > ∞
How would I make one for my 1999 VW Jetta the grill on those don't have the plastic piece around it
That looks FUCKING PROFESSIONAL and very ORIGINAL 😍😍😍
I wanna do this to my Ram 1500 stock grille , A pheasant went through it years ago and then got minced by the fan . It cracked the grille and mesh of course. So I reckon i could cut the cross out and do this mesh job , that would save hundreds !! I`m in England so it would be expensive for me to get a new one .. Good Job.
+Andrew Beech definitely! As long as you can find mesh or expanded sheet metal big enough that'd work great!
Dirtcheapdaily Yeah I`m still looking , but it looks like its gonna happen soon. Builders merchant i know has some heavy duty mesh i can use...
+Andrew Beech that stuff should work great!
Andrew Beech thought you said peasant. Was worried for a bit.
I want to do this to my 17 maxima... nissan emblem is just way to big. And a mesh grill would look just fine!
Hahaha 🤣
I used the same material to do my 95 F250 grill
COOL 😎
Looks cool mate. Have you seen any cheap 2004 Outbacks? I own one and is like to see what you'd do with one.
+Tyler Mccorkindale there aren't many around here for cheap. I like the body style, but there're other subarus for way cheaper that I'd rather have. I'm excited for when they drop in value in the next few years to pick one up!
Awesome bro they will. Otago in New Zealand has the most outbacks compared to any where else in the world. We get a lot of Japanese imports here and us kiwis like the versatility of the outback. 2 or 3 years you can pick up a cheap one, mines done nearly 300,000km and its only 12 years old.
Looks like you just brought one. Congratulations!
Tyler Mccorkindale
i despise outbacks haha unless they come with the h6 i wouldnt bother buying one the trash na 2.5L is just gutless, im also from nz tho in chch too cold in otago for me
You can use a sabre saw for cutting orginal grille
Hello what kind of glue do You use?....what's the mame of glue....tks
Im more invested in what type of scissor is that...
I used a dewalt xr multitool works great
I wish I could pay you and you could make a custom lower grill for my camry 2014 LE ..
U should paint the wheels black to match the grill 🔥👍
I'm thinking about doing this, but, replacing the stars with the acronyms "FHI".
i gave you like cause your from utah
the tools and time invested into this is way more then $4
Those couches are so damn epic...🔥🔥🔥🔥🔥
😂
This entire video gave me bed bugs.
good job bro i will be making a vid for my 2008 f550 flatbed rollback tow truck and i will be installing 12 amps 12 2000 watt 12s with led light's all inside of the truck cab costom subwoofer boxes april 29th i will post the vid
+SHYNELOS CERTIFIED TOWING #1 TOWING holy cow! That's gonna be thumpin
Where is the video?
Dan Bonnett dont worry this week i will be making it its been raining were i live so havent had time ill comment when i upload it
Cool man
did you use glossy clear coat after plastidip? I'm worried that if I use plastidip it will peal over time.
Ive used plastidip quite alot and can tell you plastidip from the can will not comeoff easily unless you have a really dirty car so id just to be safe wipe down the area your gonna be dipping with soapy water
I dont really understand how to do the drilling part can someone please explain
Normally I wouldn't do this type of mod but during touge and rally getting a rock thru an intercooler or radiator is a real fear.
I need to do this to a 22 highlander Ordered a mesh online but would not lay flat. tried to take out stock grill but couldnt figure the clips around the perimeter. Oddest thing I ever saw. . Going to have to cut out center section/ Anyone ever pull a 21-24 highlander grill?
Hand held sawzall
Not bad. I would of kept the whole backing alone. I'd put the grill in the back. Would be a nice deep frenched look.
Your located in Utah man?!
man thanks for this video!! I have an 04 outback and the grill is THE EXACT SAME so now that I know what it looks like imma give it a go!! but dude at 19:45, come on now... your finger is on the other side of where your drilling into LOL COME ON NOW
how do you attach the mess grille back onto the front of car...?
The same way you take it off 😂
Dremel with cutting disk
What colour paint do you use on your fence?
WOW... watching this video was brutal. I can't believe you are proud to show off the grills with the welded mesh! Unbelievable!
No shame in your game!
$4 diy grille that looks like a $4 dollar grill. Not sure why I expected more.
Boss relax
It looks great for 4 bucks
@@thesinfultruth7697 "looks great." sure.
had me hyped to see what subie it's going on and I see your beat up ass old whip
thatguy6214 were those lime green hubcaps on a gold car with a fence post strapped to the roof?
I was thinking the grille was mangled looking, until I saw the car... Suddenly the grille was 10x more attractive.
Hm I didn’t know they didn’t sell sawzalls in Utah
1000 - 2500 wet/dry works, 320 is way too aggressive and is why youre needing to use so many coats. If you use 320 you should use a high build primer sand that with 800 then shoot 2-3 light coats.
zipties is the best invention in the world
Jigsaw probably worked way better than a sawsall would. At least with mine, anyway. Thing would have ripped that grille right in half.
Ziptie galore
Can't believe that you don't have an angle grinder
4:30 is when he broke the grill
Should've got on ebay and order yourself a black grill mesh for at least 40 bucks for you vehicle 😁
I can only do six inches. Story of my life.
Only god knows what you're going through to cut the stock grill, yours is easy in comparison to mine which is dense in fins and multiple layers of plastic and i needed a clean cut of the perimeter only.
How much would you charge to do this on my g37? I live in U.T
Just buy one
First step: Get a dumpster and get ride of all that shit on the patio.
You should have sprayed painted it, cleaner look
Does any places sell CHROME mesh??
+William Miller you can get stainless online or at a metal supplier. eBay for sure sells chrome mesh
But you broke it, that means get another one.
Aqui en venezuela le rompen la malla para robarle la bateria,
here in Venezuela they break the mesh to steal the car battery
Just wrap your chrome with vinyl
Youse a grinder with a cutting head for metal next time cuts better for the plastic or metal
I’ve never had more anxiety
Every dollar you save is an extra 1/7th horsepower added
$4 for mesh....$14 for all them zip ties
why not rivet it
Can just go online save yourself a whole day of work An buy one for $25.. An it won't be held together with zip ties
it can be used for a car that didnt have mesh grill available on the market
Easy to avoid using zip-ties. All you need is some glue and a sheet of plastic to essentially sandwich the mesh in. Or use a dremel to make a shallow channel the whole way round and slide the mesh into that.
Are you sure you will get exactly what you want and how you want it to look?
The channel is called "dirtcheapdaily"not "I found it online and bought it"
Can I just pay you to do my charger?
Sure
ed sheeran
predictive!!!
Can I pay you to make me one
subaru 2.5rs