How Much Did It Cost? Complete LS Swap Cost Break Down
Vložit
- čas přidán 3. 03. 2020
- Sorry for how vanilla this one is lol
Merch Available!
teespring.com/stores/snidertr...
Check out some of my homies channels
@Doctor Differential And SpeedShop
@LSX and Chinese Turbos
@dickhamm
@oldecarrautoguy
@str8sixfan
PO Box 218
Nashville, MI 49073
Instagram @snidertron3000
The music used in my videos can be found in the CZcams Audio Library - Auta a dopravní prostředky
I probably speak from a minority, but I HIGHLY HOPE that you have another 2nd gen Camaro project roll in! Love the vids!
Looks Great!! Your getting pretty damn good at the LS swap for the bread and butter!
Great info man. I’m looking at doing an Ls swap and while I’m not super knowledgeable I do know my way around a car pretty good. Watching this makes me believe I can do this. Thanks 👍🏻
Really liked the video. ever since you put the cam in Goldie, I have been "JONSEN" to put one in my 05 Yukon, and do the damn tune myself with a HP tuner. Really like the idea of doing it myself. Thanks for putting out these videos, I look forward to each and every one of them. Please, PLEASE, don't stop!!!
Great work Josh! Really enjoyed this build
I got my LQ9 for 188.00 at the salvage yard that I hope it work, I love your videos! Thanks for sharing I hope I can be able to do the swap myself your videos has been really helpful for people like me! Thanks again!
Pretty cool how you broke it down for us. This could really help out the ones who are trying to do something similar. I just got done rebuilding a 5.3 long block and was wondering what all I would need to swap it into a 90ish Camaro. Now I have a good idea. Cant wait to see you start on the next one
Great Video this was very helpful because I recently picked up a 85 Firebird for $800 it's been sitting for 16 years and I've been trying to see what it would cost to do a LS Swap and try and get into the high 10s or low to mid 11s in the 1/4 some time in the future so as far as figuring out how much it would cost to get the engine in and get it running this shows I was not to far off from what I was estimating it would cost and boosted my confidence because now I know I didn't miss any big parts that I will need and gives me hope this car will run sooner then I'm expecting first time doing anything like this so I'll see how it goes but great video
The build was awesome! Can't wait to see you finish Jack black and goldie
Learned a few things for my 80 RS swap. Thanks
Love this channel man , keep it up
Like the build come out nice ! I really like to see a crazy n/a 5.3 maxed out something like that
ENJOYED !!! GH & JB are WAITING FOR U !! THANKS !~
Thank You sir,,,noooow Truck stuff just in time for spring!
I’m doing this exact same swap! Awesome video
Great job! It turned out awesome.
I’m wanting to do an LS swap on my ‘92 Camaro, but I’m no mechanic by any means. U make it sound so easy and affordable that I wanna bring my car to u for a swap!
Hell yeah man !! good stuff !!
Nice work! Great channel.
This is awesome. Just picked up a 78 roller & want to do a budget build.
I showed my fiancee this series and she and I loved it! Great bonding experience for a car couple, thanks Snider!
@Mr. 6 liter I assume everyone does. I strive to make every video uniquely romantic
Great info currently getting ready to drop a ls inside my 88 caprice classic
Even the way it's done it's still pretty cheap! Cant wait to see the next video!!
Sick build 👌💯
To me though, going ahead and going through the motor putting new head gaskets n good bolts in it, even if you're not doing cam swap. It's still good idea to put new oil pump ,pick up tube oring and go ahead Re gasket it all from oil pan up is good idea.
R&M intro was a nice touch!
Intro was 🔥
It was okay, I was having a hard time holding the camera steady haha
Great job and Another great video 👍👍🇨🇱
Love your videos. You should do a Q&A video. Do you work on cars for a living or is it a part time thing?
I was actually just thinking yesterday that it's been a while since I've done a Q&A. I might post something tomorrow on here asking for a questions for itlol
Great video, I’m looking to do a LS swap on my ‘73 Malibu. I wish you were closer (I’m in Ca and prices are a lot higher) I definitely use your shop.
Yoooo that intro 🔥🔥🔥
Enjoy the videos and watching you and your dad together. I have a 90 454SS OBS, putting a 572 with Edelbrock ProFlo 4 fuel injection. I’m looking for a cold air intake similar to what you used on this. Where did you get it?
nice work I just did a 78 trans am ...Judt issue hood clearance I chopd up oem Truck bracket n mde a brace on the right side. Used a 5" longer belt
I have a 78 also
What ls did you go with ?
About how much did you spend ?
Nice job! Still need to go back and check them out but I did what the one and that cam sounds nice !!! I hate Ls cams they just sound like the old school I hear it’s because they do the 4/7 swap?
But a big block cammed up is gods gift to the car guys haha!
These motors are impressive they really make power! Great foundation! The them heads💪🏻💪🏻💪🏻 great info brotha!
Brother your editing is fucken mint!!! N your content ofcourse
Great info. I do appreciate the detail as that is where most of us get surprised. Was the $4K just the parts or was that your labor included?
He said parts, including transmission rebuilt
Right on. Great video, I've got a 79 350 4 speed I'm thinking of swaping.
im swapping my 78 350 4 spd really soon almost same car lol. im swapping for an ls2
Nice video!!
Man I love seeing crate motors in the old school but sweet build regardless!
Is the 2nd gen or 3rd gen better or easier for an ls swap. I've always wanted a 79 z28 but the 80s cars introduced 5 and 6 speed manuals, I think. I also wonder if a 383 stroker would be a better engine to use for a 2nd gen
I really enjoyed the videos, and I have the same camaro to which I’m going to do a swap to, I have a swap in a box from summit racing and a efi tank conversion, I was wondering would you be able to send me a copy of the item list and/or part numbers and where you got them from....thanks
I agree with you drop it in stick get it running and driving
Just find your channel and subscribed .
Sick🤙🏽
Those damn 2nd gens are so stylish
i like the budget build i am doing starting with a 79 z28 rs t top full option car i got it free with 2 hard top z28's one has new custom interior and a t-10 4 speed then i picked up a 450 hp 454 with a 02xx 400r turbo which is good to 800 hp stock both had 6,000 miles on them for free all 3 cars are rust free but can build the t top with a perfect body no dings even got a extra lt front clip i got free the 454 has steel crank heavy rods heavy pushrods with high flow heads factory built the 02xx comes with the heavy 8 bolt pump heavy clutches stage one shift kit factory built then i got new in box a fly wheel for the 454 with new 12 inch clutch kit .i have all the parts to go either way a set of rally wheels and a set of centerlines both i got free .have u ever seen a second gen with power trunk power seats power windows and locks light under hood and trunk lid also have the factory louver for back window and the full spoiler kit wiper delay cruise control tilt wheel tach in dash ac all factory parts but i have a better set of seats sitting for it all leather black full movement electric heated seats for it that look perfect condition that is what i have to start with for free. mite be trading some parts for a suspension up grades for it and a set of side pipes new in box . right now i am finishing my 68 chevy pu so far i only have 2000 in it and it is sweet i had offers up to 12000 for it with out final paint.
For the power steering and alt brackets did you use the speed engineering truck 551521X-3 or the corvette 551521X-1 ? If you used the truck 551521X-3 did you just use an oem truck water pump? TIA
I’m ready to see y’all LS swap a OBS!!!!!
comparatively... its easy to do an obs chev
Damn I just parted out my old Silverado. Sold the engine with all accessories ecu harness for 150. Granted it had 280k but ...
What about the fuel system? Doesn’t that need some sort of modification to supply the proper fulling?
Can you put up the info for the cold air intake that you have?
I’m doing the same swap
I have a 79 firebird with a lq4/4l70 swap in it. Which prior had a 350/350. Would I have to shorten my stock drive shaft to make the new ls swap line up?
An if i was owner i would have went on got the diff done. Ut will definitely cost him a second at the track, but looks like he's building a daily street driver anyways so do it on a budget lil at a time an enjoy the car while doing it
what radiator did you go with? also I had the factory 5.3 intake but there is literally no way it would fit a stock hood. I went with a 2 inch cowl and it still hit before I got an Ls1 Intake. Heard you need more like 5 inch cowl to use the truck intake
I get 700 on my 5.3L Ls with a Complete harness all way to obd2 port, ecm and all the engine complete with alternator starter and all. That said I have some good 1s Complete engine for 500. So that's about rite there
just spent over 4k to finish my gbody swap ....i could have done it for next to nothing but fuck that i wanted this thing to look bad ass when u pop the hood or see me rip by you i went Holley for everything
I have a 2 gen matte black camaro that I'm doing a 6.0 and 4l80 swap.
Hi, I have 1981 pontiac gonna ls3 swap it. I was wondering what wires should I keep from the oem harness?
i would like to say that for a fun factor i would rather slap in a tremec 5 speed as apposed to that power gain. like to rip through the gears is all im sayn
I like manuals, they're just expensive to build
Thanks for sharing but add about 25-35% more to the cost for California DIY'res
The cost of everything is just so much higher here not too mention shop rates and CA Tax fees etc......
How much hp and torque will a 3 speed turbo 350 handle. I have a 78 type lt with a 305 sbc and it has the turbo 350
You ever go out to Milan?
did you ever happan to figure out what mufflers are on it ?
That’s not a bad price at all people around me get 1k for a used 5.3 with like 180k so it’s hard to find a good lower mileage motor to swap into something
Where are you?
Does the transmission have to move back relocating the trans cross member? I know you bought one at length but did it have to be done?
Thinking of swapping a gen3 into 81Z that has a 700r4 in it that I’d like to use.
As always I live the videos!! 👍👊🏼
Nope, with the dirty dingo mounts I was able to leave the trans in the stock location and slide the motor to where it needed to be
The fucking intro though 🔥
HOLD UP !!!!!!!!! Daaaaaaaauuuuummm this beat 🔥!!!!!!!!
I looked up Method Man Type Beat and stumbled on it lol
Dang looks like papatron went muddin in that thing
He's love himself some mud
I'm ready to see goldy hand jack black his lunch
Im going to swap it to cuz my Ford Harley slow so why not but I thought it was like 300k+🤦🏽♂️😭
PSI harness = china ebay harness. Made in the same location.
Can we get around to some James Brown action now!!! Camaro turnt out sweeeeet but I wanna see that Mazda fly!!!!!!!........hope you made a pretty penny off that 2nd gen swap!!!, just make sure you wash her before you turn her back over!!!
Unfortunately I think I'm gonna try to throw the truck together real quick because it needs a lot less to get back up and running again. But I definitely appreciate the enthusiasm for James Brown! 🤘🤘
I just need mine cammed
What cold air intake is that?
How much was labor?
Idk if i missed it or you didn't day but do you think the stick truck accessories would fit in the second gen f body or did you need a bracket kit to reroute all the front accessories?
I think they'll fit. I've seen stock truck intakes fit fine. Only thing you'll really want to change is the oil pan. Everything else from a truck fits fine
@@SniderTron3000 thanks man
What year Camaro is that?
If we’re voting for what’s next, how about a c3 corvette? I want to swap my 73 but haven’t found anybody doing them...
I wouldn't mind that lol
Can I get you to do 1 for me.in my 80s cutlass...and how much?
If you have the motor already how much would it cost i have the motor harness i just need tye adapter to hook itto my turbo 350 trans aside that what would i need you can make the pan the work and everything else so aside a adapter what would it cost... Do you have to have a tune.. Can you start the motor without removing the vat systwm do you have to have a tune or computer work
If you have the motor, all you need is the flexplate setup to bolt them together($80ish), f body pan and pickup (~$150‐200), and motor mounts. You can get adapter plates for like $60, or the dirty dingo mounts for $105. Stock Camaro radiator, truck upper hose, the bottom hose I mention the part number and it was like $25. Getting it in place is fairly cheap.
Looks great great job 👊🏽👍🏾🔥🔥🔥🔥
dude where are you located?
I don't know why he would not have you put in one of those Eaton knock offs in there I assume its like a 10 bolt but maybe the smaller like 8.2 or something vs the 8.6 or something in the late model trucks
its a 8.5 10 bolt it shouldn't much trouble to find a 3.08 3;23 or 342 limited slip rear axle for that
@@glennshotrodgarage5509 ok ya that should be the same unit that he put in the truck I'm pretty sure when I was looking the 8.5 and 8.6 were the same and you just re use the ring gear so that should not be a problem I broke my diff on my 04 Silverado and went back with an Eaton but I'd buy the knock off they are like half the price you can get one for under $300
I'm going to be ls swapping my 89 gmc sierra's 350sbc to a 5.3 4l60e. The 5.3l is coming from a tahoe that i currently own so i have the complete engine. Harness, pcm everything. My question is do i buy a standalone harness and intergrate that with the 5.3's harness or do I intergrate my tbi harness to the 5.3's harness ?. Any help would be greatly aprreciated !!!
I've never personally integrated an LS harness into an OBS harness before. I could be wrong but I think AGearHead4Life has videos on that subject
@@SniderTron3000 the mechanical side of things seems pretty straightforward ,but the wiring harness is what confuses me. I've heard that on the 88-96 OBS's i need to get a standalone and just intergrate that with the ls harness ,but im not sure.
Carlos_ C!! Check out 88-98 obs ls swaps group on Facebook.
@@mcfero1 yea i just asked on there. Thanks for the recommendation!
What about the fuel system. I hearing you really need an in-tank set-up. That's 500 right ? People are saying you can't use an electric pump to "suck" the fuel out of the tank. Thanks
Did I miss that? I know I wrote it down. The fuel pump is a Walbro 255. Its super common to use that for an inline pump on these swaps. $80
@@SniderTron3000 So you are saying you can hang the pump on the frame somewhere and pull the fuel out of the tank, this seems to work ok. Most videos I watch gloss over the fuel system is all. Thanks for your input.
How much would it cost for you to do an LS swap for me in a 72 Monte Carlo would love to see that in your videos
You can email me at snidertron3000@gmail.com
What cold air did you use? Looking for a decent cheap one like that
Just go on ebay and get one for a '99/'06 silverado/sierra you can find them for like $50
Yeah, thats exactly what it is. Just an ebay one. You can get fancy ones but they don't make enough of a hp increase for me to justify spending $100-250 on like a Volant or K&N
Dang. $500 for the engine. There like $1500+ with around 150k on them now
What headers did you use ??
Speed Engineering f body headers
What did you buy and do for the fuel system?
Yeah, someone else pointed out that I skipped over that. Stock steel 3/8 fuel line from back to front with a couple small sections of high pressure hose. Corvette filter/regulator and a Walbro 255 inline pump
This car is for sale on FB Marketplace right now
Yep yep!
Why is it so tall?
Its always a bummer when you end up deeper into a car than the car is worth.. looks like that happened here. Oh well
Where are you finding a ls1 intake for $227?!?!
Also, truck intakes won't fit under the hood of 2nd gen camaros.
Do you have a video of the rad fan setup you made? Looks like a cooking sheet with ebay fans. Not knocking it, just need details my brother.
There's an entire build series on the car. There was a bunch of LS1 intakes on Marketplace for $200-250. The fan shroud is an aluminum baking sheet with tabs welded to it to mount. And I have personally seen with my own eyes a truck intake under a stock 2nd gen hood.
You want to do mine?
The build for this car disappeared from your page. Or I'm just an idiot
Nah, I don't think I ever made a playlist for this car
my dude i love all your stuff . but what is going on with the auto focus zipping in and out on the car through the whole video.
That camera has been so abused lol ita fallen through engine bays off hoods, the lense has welding slag on it, there's some paint over spray, etc. I think its just trying its best lol
But it doesn't help when I'm only taking up half the screen because its not sure what the focus is supposed to be on
What's your transmission guys last name? My guys first name is also ray.
Shriver
one wheel peels
That camaro sounds really mean nice build bro