How to remove Phillips sonicare diamondclean body from its casing
Vložit
- čas přidán 30. 01. 2020
- On my subscribers request a detailed video on how to remove toothbrush body from it's casing.
Repair videos of the toothbrush as it's most common faults you can find in my channel.
Further more in depth videos on this topic:
Repair of water damaged Philips sonicare toothbrush -
• Repair of water damage...
Opening and repair of the toothbrush that has no vibrations - • Philips Sonicare Diamo...
Other typical faults that this toothbrush can have - • Typical faults on Phil...
Repair for a subscriber, removing PCB from it's casing - • Philips sonicare diamo...
If you would like to share some support for the channel or pour a beer as a thank you for successful repair: paypal.me/LetsFixItGarage
These are affiliate links, so if you buy directly from them small amount will be provided for channel support:
Rubber seals that I buy s.click.aliexpress.com/e/_ANI5D9
Rubber seal 1 pc s.click.aliexpress.com/e/_9IqPhH
Rubber seals with end cap s.click.aliexpress.com/e/_A9w9wR
Complete head for replacement s.click.aliexpress.com/e/_AkS0Zh
Complete head with new seal type
s.click.aliexpress.com/e/_9wGRop
If repairing of the water damaged tracks is not your thing you can replace the whole motherboard:
PHILIPS Sonicare diamondclean HX939P HX939W HX939B HX939V HX939L Motherboard s.click.aliexpress.com/e/_ASQ2zh
PHILIPS Sonicare diamondclean HX9370 HX9340 HX9350 HX9360 Motherboard s.click.aliexpress.com/e/_9fboHh
SMD fuses (2A) that I use in my videos s.click.aliexpress.com/e/_9Hsv9V
Smaller SMD fuses s.click.aliexpress.com/e/_9jKjOf
Soldering iron set
s.click.aliexpress.com/e/_AOsIIp
Soldering Iron tips
s.click.aliexpress.com/e/_9gjV6V
Screw driver and bits that I use s.click.aliexpress.com/e/_9wYDWJ
Screw driver and bits that I would buy now 😊
s.click.aliexpress.com/e/_ANI5D9
s.click.aliexpress.com/e/_AAZ275
Thank you so so much! My Sonicare was wobbly and loud, and normally, I would've asked my husband to fix it for me (he really is good at fixing stuff). But I wanted to try it myself for a change. Nearly gave up during your last vid because I couldn't get the body out of the casing. Thanks to your additional video here, I managed to fix the problem myself! It did take a while (2 hours and a lo of cursing). But my Sonicare works again now and - from someone who has two left hands and really can't fix anything - I'm pretty pleased with myself right now. :-)
Respect for trying it out and not giving up :) next job is car engine ;) (almost) everything is easy with a good CZcams video ;) good job!
Thanks so much!! I was dreading having to replace this almost 5 year old toothbrush again since it cost $240 and now it's working perfectly! The update on how to release the retention tabs is clearer and helpful! I held it under a lamp and disassembled in a minute.
Your welcome, glad it helped :) I tell a lot of people that it's quite a reliable toothbrush if you take care of it and when you get to know it even repairable that's getting quite rare in our times :)
Thanks for this video! After struggling for 30 minutes I was able to get it out within 2 minutes after watching your explanation!
Saved me so much frustration and any damage trying to figure it out. Got it in 2 seconds after watching this.
Holy moly this video helped me out so much. I had to watch a few times but finally got it! I was this close to buying a new toothbrush but it turned out just to be a loose screw. Thanks for creating the vid!!
Nice! Glad it was helpful. Hope it will encourage to work on future cases as well ;)
Thank you!
I got the cap off but I'm struggling to get the retention tabs in order to remove the body from the casing. I'm afraid to damage the tabs too much and then not be able to get it off.
Wanted to suggest a video for that but you are commenting on it :) only suggestion is to apply slight pressure on the whole brush with the tip pressed on the table. The. When you release one of the tabs it will not snap back. And yes after you release both of them you still need to press it down with some force. First time is always the hardest ans don't worry they don't brake easily! Good luck!
Awesome, I should have looked further before trying mine!
This video saved my tooth brush. thx
Excellent explanation! Very good attempt.
Alright, thank you!
Thank You!!!!! Thank you!!! Thank you!!! This was my third Sonicare 9000 series that broke where the tip screw was loose and I wished I had seen this earlier and not have thrown away the old ones. I was watching your other videos but this one was key as it is impossible to see but your verbal tips in this video helped me figure it out and I fixed it. Thank you again!!!!
Thanks! Gald it was helpful and you got the trills from successful repair, it is quite addictive ;)
This video is very helpful. thank you. Do you have any video on how to remove the part between the magnetic part and shaft,? the part just under the black rubber part seen at 4.37 mins in this video. Thanks in advance.
Hi, no haven't done it... That involves cutting the housing apart and a lot off difficulties assembling it back.. I saw few videos on CZcams how it was done can't remember did any one showed assembling it after wards or no.. I would suggest replacing the electromagnet part completely, to much risk that it will not hold after the repair..
@@letsfixitgarage thank you for your reply. I really appreciate it. Might be one day.
Great video, subscribed! Many thanks for this, it was a useful addition to your other video that I initially found. It helped to see those 'clips' out of the body to understand how to attack my brush to get the guts out :) Very happy to save my £ and fund some more budget tech instead :)
Glad it was helpful 👍
Ha! I’m still working on how to remove the end cap, I’m afraid to break it! Do you just pry it off?
Check my other videos. In "no vibrations fix" video I show it on camera. Just don't stick anything sharp inside as you will damage the plastic cap or rubber seal. If the upper seal is damaged you could use air compressor to pop the cap off. Saw someone on CZcams doing so :)
In this model, does the power on and off usually fail?
Sorry didn't understand the question.. I have a video with majority and usuall defects you can check that to get an impression
I have a Soniccare toothbrush that I replaced the end part that the toothbrush attaches but now it won’t charge. It’s working fine other that it won’t now charge. Any idea what the cause would be? It charged fine until I disassembled it.
Well if it was working before look for damaged components.. maybe by taking out charging coil got damaged or some component on the board..
@@letsfixitgarage ~ I see no damage. Could I ship it to you? What would you charge me to look at it?
Write me to letsfixitgarage@gmail.com
Didn't work for me. Couldn't get the clips to release and broke the toothbrush.
Hah. I was trying to release the latches for a good 20 minutes and it turns out I had already released them, mine just needed a good whack on the table to spring out.
They are just plastic tabs that spring back so that's why I was telling to keep constant pressure on it :)
Underrated comment. Was so mad that I couldn't open it that I smacked the tip on the ground like a jackhammer. It finally opened
Sometimes it helps sometimes damages quite badly the tabs or seating place.. so be careful with this method ;)