One of the problems I have with Dirll Doctor is the size of the power cable that is thick enough that it could have been used for appliances like an electric wafter-heater, the cable has to be secured otherwise it pulls the unit off the table
Here is a tip some may find useful. The machine can't read if a drill is chipped or out of shape. It can only polish what it sees when against the striker or anvil. Grind off a few thousands of the tip point with a regular bench or drill grinder and reinsert the drill bit against the anvil. Let the alignment paws grip the drill and continue as usual. You have just tricked the machine and totally new cutting flutes will be the result. I do it with most drills but the instructions won't tell you this trick. Problem solved. GATOR
Hi, I'm having a problem with my drill doctor 750x the diamond stone keeps moving back and forth although it's been thighten down properly with the key holder and Phillips tip screwdriver i can still physically pull it forward and backwards with just two fingers it's as doh the cam is not holding on tightly to the motor shaft any ideas on how to fix this problem guy's?
Absolute junk. Comment comes from experience. 45 year background in the biz as a machinist. My eyesight is failing and thought this may help. Take my comment for what’s it’s worth. Only stating my experience.
,,,,,I got the 500 unit....Thanks for a professional and concise explanation of the tool.............
One of the problems I have with Dirll Doctor is the size of the power cable that is thick enough that it could have been used for appliances like an electric wafter-heater, the cable has to be secured otherwise it pulls the unit off the table
Just for fun took a few bits that have snapped in half. And tried to see if I could but a new edge on them. LIKE NEW AGAIN!! Just a tad shorter😂😂😂
Dammnnnn that first size drill bit hey🤭
Here is a tip some may find useful. The machine can't read if a drill is chipped or out of shape. It can only polish what it sees when against the striker or anvil. Grind off a few thousands of the tip point with a regular bench or drill grinder and reinsert the drill bit against the anvil. Let the alignment paws grip the drill and continue as usual. You have just tricked the machine and totally new cutting flutes will be the result. I do it with most drills but the instructions won't tell you this trick. Problem solved.
GATOR
How to remove and change grinder wheel please tell me step by step
It ate the tip off my bit!
Hi, I'm having a problem with my drill doctor 750x the diamond stone keeps moving back and forth although it's been thighten down properly with the key holder and Phillips tip screwdriver i can still physically pull it forward and backwards with just two fingers it's as doh the cam is not holding on tightly to the motor shaft any ideas on how to fix this problem guy's?
They never respond to customers.
Agora sim
You don’t explain when aligning where you place the chuck. There is a 118 deg mark and that’s it
On mine it shows 118* but has slots to go past or before it
Absolute junk. Comment comes from experience. 45 year background in the biz as a machinist. My eyesight is failing and thought this may help. Take my comment for what’s it’s worth. Only stating my experience.
😆
The part you want is at 7:46
0:47
1:02 1:05 1:09 1:10 😊
Doesn't sound simple to me.