I definitely hear you there. From what I've seen there are only 2 other coyote swapped Mustang II's, a notchback Ghia that was a pretty serious resto-mod and Dave Fortuna's Evolution which is a show car. Mine obviously being the only King Cobra, I've been wrenching on in every day in some capacity so I should have some more content coming on it soon!
@@dugganracecraft exactly man, 3 that is known with yours being the only KC. I’d just love to see the car done and in paint etc. Would be awesome to see it on Race Week. Ahhh, I’m gonna say boost..that’s always a plus. Hope it all works out man, keep posting vids and I’ll keep watching them.
not bad at all! I have more then that into my cobra ii and it's just a pushrod 302 t5 swap! I think what made the final cost so high is because I had to do just about everything 2 or 3 times because nothing would fit and parts for these cars are expensive and hard to find!
Oh I definitely hear you there lol I don't even want to know what the total would be if I included all the iterations of every build I've done with it. It would be sickening lol
@@dugganracecraft it's definitely a labor of love! makes me sick now and I have $25,000 invested into a mustang 2 that isn't even finished yet I will never get a fraction of my money back but at least I'll be the only one in town with one!
I have a boosted 2020 mustang gt but wanna coyote swap my 2011 Vic. Throw in a 5 speed while I'm at it and make a fun road track car out of it. I'll pull it around in my 2011 f150 5.0 haha.
Seriously constructive criticism, you have interesting ford content but slow down!! That said did you swap it to mustang cams or left the F-150 cams in it?
I appreciate it! It's a very fine line to walk, you have to keep the video moving but not forget key points! To answer your question, I ended up using Mustang cams but only because I already had them. You can just as easily use F-150 cams and get a control pack for them from PBH.
sweet , I was hoping that you would start pumping out the videos on a regular basis. for what all you have done to that car that isnt to bad expensive I think. Id hate to know what I got tied up into the mustang ll's lil brother I have.......Beans the 79 pinto . I replaced or built everything from the electric fan to the rearend and it took me a couple years to get everything together and built but I dont regrett one bit of it because that amount of horsepower in a pinto is stupid crazy fun even though i built a unreliable sbf 😭😭😭😭 ........😂🤣😂 nah man Im kidding I would drive this thing everywhere , even on a cross county trip 💪😎 if I could afford the fuel prices 🤣😅
I phrased that poorly lol Every small block I've had has been reliable besides one, and that's a story for a different time. I mainly was referring to the drivability compared to the power output. I love a lumpy cam small block, but I wouldn't daily one. I'll be going to the all ford nationals next year in Indy, you should come up!
@@dugganracecraft 😂🤣😅😂 yeah I love a lumpy cam as well but as much as i work I dont get to drive it very much. Id also like to drive a yote and see what all its about as well. Indy Nationals 🤔 that sounds interesting and Ive never been or know much about it. what is at the event to do ! Id sure like to come though as Im plannin on going to different events ive never been 2 and it would be cool to meet ya as well
Well I know that it's the annual Mustang II re-union and hopefully my car will make it's debut there as a finished car! It's one of the annual Ford/Mustang events in the country!
@@dugganracecraft That would be sweet to go to. Are u driving yours there or trailering it. Where is it being held at . Thats one of the main reasons I built my car is to go to stuff like this and if u get any special parking we can tell them that im your crew cheif so that beans and I can get a close spot as well 🤣
I do! I named the CZcams Channel after my shop, Duggan Racecraft. If you're interested in having the swap done send me an email at dugganracecraft@gmail.com
I've been anxious for this video! you did an awesome job man!
Thanks for coming back a second time. ;) I had to reupload it due to some technical difficulties. But I appreciate it, thanks a lot!
Just get the cobra finished. The fox’s have been done in every way possible. This build is damn near 1 off and the only one I’ve found on CZcams.
I definitely hear you there. From what I've seen there are only 2 other coyote swapped Mustang II's, a notchback Ghia that was a pretty serious resto-mod and Dave Fortuna's Evolution which is a show car. Mine obviously being the only King Cobra, I've been wrenching on in every day in some capacity so I should have some more content coming on it soon!
I almost forgot! I've got something BIG coming for the king cobra but I don't want to comment on it yet until the deal is done!
@@dugganracecraft exactly man, 3 that is known with yours being the only KC. I’d just love to see the car done and in paint etc. Would be awesome to see it on Race Week. Ahhh, I’m gonna say boost..that’s always a plus. Hope it all works out man, keep posting vids and I’ll keep watching them.
Great, informative cost break down. Thank you sir
Glad I could help!
If you want it done right, it takes planning, money and time. Well done!
Anything worth doing is worth doing right, right?!
not bad at all! I have more then that into my cobra ii and it's just a pushrod 302 t5 swap! I think what made the final cost so high is because I had to do just about everything 2 or 3 times because nothing would fit and parts for these cars are expensive and hard to find!
Oh I definitely hear you there lol I don't even want to know what the total would be if I included all the iterations of every build I've done with it. It would be sickening lol
@@dugganracecraft it's definitely a labor of love! makes me sick now and I have $25,000 invested into a mustang 2 that isn't even finished yet I will never get a fraction of my money back but at least I'll be the only one in town with one!
cheaper than a new car and you wont have a payment this way... thanks for the video :D
Absolutely! Thanks for watching! And that’s what I keep telling myself 😂
I have a boosted 2020 mustang gt but wanna coyote swap my 2011 Vic. Throw in a 5 speed while I'm at it and make a fun road track car out of it. I'll pull it around in my 2011 f150 5.0 haha.
That would be a badass set up! You should do it!
Seriously constructive criticism, you have interesting ford content but slow down!! That said did you swap it to mustang cams or left the F-150 cams in it?
I appreciate it! It's a very fine line to walk, you have to keep the video moving but not forget key points! To answer your question, I ended up using Mustang cams but only because I already had them. You can just as easily use F-150 cams and get a control pack for them from PBH.
sweet , I was hoping that you would start pumping out the videos on a regular basis. for what all you have done to that car that isnt to bad expensive I think. Id hate to know what I got tied up into the mustang ll's lil brother I have.......Beans the 79 pinto . I replaced or built everything from the electric fan to the rearend and it took me a couple years to get everything together and built but I dont regrett one bit of it because that amount of horsepower in a pinto is stupid crazy fun even though i built a unreliable sbf 😭😭😭😭 ........😂🤣😂 nah man Im kidding I would drive this thing everywhere , even on a cross county trip 💪😎 if I could afford the fuel prices 🤣😅
I phrased that poorly lol Every small block I've had has been reliable besides one, and that's a story for a different time. I mainly was referring to the drivability compared to the power output. I love a lumpy cam small block, but I wouldn't daily one. I'll be going to the all ford nationals next year in Indy, you should come up!
@@dugganracecraft 😂🤣😅😂 yeah I love a lumpy cam as well but as much as i work I dont get to drive it very much. Id also like to drive a yote and see what all its about as well. Indy Nationals 🤔 that sounds interesting and Ive never been or know much about it. what is at the event to do ! Id sure like to come though as Im plannin on going to different events ive never been 2 and it would be cool to meet ya as well
Well I know that it's the annual Mustang II re-union and hopefully my car will make it's debut there as a finished car! It's one of the annual Ford/Mustang events in the country!
@@dugganracecraft That would be sweet to go to. Are u driving yours there or trailering it. Where is it being held at . Thats one of the main reasons I built my car is to go to stuff like this and if u get any special parking we can tell them that im your crew cheif so that beans and I can get a close spot as well 🤣
Liked n subd good stuff buddy
Thanks brother! I appreciate it!
I have a 2001 F150 Lightning body and I wanna swap a Coyote in it. I wonder how difficult it is to do.
im around the same, 2002 f250 i wanna swap too
I don’t think it’s all that bad, I know it’s been done before!
7:20 11k + and its taken him 5 yrs!!
5 years is a little bit of a stretch, probably a year if I did it all at once!
anyone think i could fit one of these things in a 78 mustang hatchback ?
I don’t see why not 🤷🏻♀️
Hi friend. Do you have a shop? If so do you offer this swap? In a 83 F150 truck
I do! I named the CZcams Channel after my shop, Duggan Racecraft. If you're interested in having the swap done send me an email at dugganracecraft@gmail.com