BSL014 Fluke Networks IntelliTone Pro 200 Tone & probe Kit

This is a review of the Fluke Networks IntelliTone Pro 200 Toner and Probe Kit. The content of this review applies to the Fluke Networks IntelliTone Pro 100 which only has the basic functions.
The IntelliTone Tone and Probe kit incorporates both the traditional Analogue Tone & Probe, as well as Fluke Networks Digital Tone & Probe technology. The digital Tone and Probe provided better cable identification.
Also, this one and probe kit also has Fluke Networks positive Pair identification where the tone will change when a cable pair is shorted.
This tone and probe kit can be used on a wide variety of cables including twisted pair, coax, Cat3, Cat4, Cat5, Cat6, in fact almost any cable with two conductors.
Finally, this tone and probe kit also provides a very useful cable map function to determine pinning on both RJ11 and RJ45 terminated cables and jacks.
Note: The review briefly touches on circuit traces, distance to fault using a TDR, and the types of tools available for fault location on cables.

[@Matt-ps9iz]

Looks like you haven’t posted a video in some time and may not be active anymore but man you’ve got a bunch of really thorough and helpful videos here. I appreciate that you took the time to make them.

[@1rk1n]

After refining my search, i found your video. Super straight to the point, and helpful. I appreciate it.

[@Pterocarpous]

Thank you very much! Went quickly - Will need to rewatch a few times w/ my test set to hand - You answered questions I had about my own (same model) test set and about other methods of tracing and identifying faults. Thank you again!

[@incith]

My man...thank you for this. I had no idea why my toner was making sounds I'd never heard before!

[@majesticmajestic2038]

Very helpful! Thank you for taking the time to make the video!!!

[@CraigHair]

I’m looking at purchasing one of these. Thanks for the review. You’ve helped me make the decision to purchase.

[@joncline7]

Excellent information. Thank you for taking the time to share.

[@marcoblanco3432]

4 years later and it still did it's job!

[@RafaelGonzalez99]

Thanks to show how it works, its refreshing.

[@ahamed123451]

Great explanation,Thank you.

[@klave7]

Very helpful, thank you!

[@G4rg4m31_]

FYI, the Pro200 is actually able to tone on a live/active network.

[@lowvoltagedude7837]

zykzyk85 that is very true normal toners have problems with a live switch for sure.
Lots of noise on the line this works great in that situation

[@DenyTheZeitgeist]

I’m absolutely JAZZED about this. Old comment, I know, but all that way into 2024, it’s still a problem. My current toner hates active POE digital networks. This is gonna save me a ton of guesswork.

[@richardgauthier181]

Great Video ...Very informative ...Thanks

[@umankumarkakal2927]

Thanks a lot very well made video

[@crgslistbuyer]

Great review and simple explanation of its uses, Thanks

[@blacksheeplogic5383]

+crgslistbuyer Thank you!

[@brandonswanson9503]

Thank you! Very helpful

[@Chrom35kull]

Hi, Does anyone know where I might get a Pro 200 Toner repaired? I bought one off ebay, it worked but I put it on a cable that runs by a motor and its now stopped working (battery is good). If set the probe to analogue mode and hold it inside the RJ45 port of the toner I can hear it beeping lightly in all the different settings. (except ohms, that just hums).

[@maurosgarage]

thank you for the video.

[@707SonomaComa]

Can you test just one Single Wire at a time? Such as using it in an Automotive situation or for Trailer-Camper wire mapping after someone else has made a bunch of splices and re-wiring?

[@yoaverez]

So much charm and charisma my guy

[@elektrikahectorfernandezol5341]

Muchas gracias, me ha ayudado mucho. He acabado comprendiendo la cantidad de prestaciones que tiene el generador de tonos Intellitone Pro200.

[@MR-zj7yg]

HOLA HECTOR, cuql es la diferencia entre el generador de tonos de este video y el que tieenes tienes? En este veo que tiene 4 iconos amarillos con luces al lado izquierdo del selector y el tuyo tiene 2 .

[@elektrikahectorfernandezol5341]

@@MR-zj7yg El mío es el nuevo modelo.
El anterior estaba más enfocado a teléfonos.
Y el nuevo es prácticamente igual.

[@MR-zj7yg]

@@elektrikahectorfernandezol5341 Gracias Héctor, saludos.

[@mircon2198]

Thanks with greetings from Germany :)

[@JustinEmlay]

Does anyone know where (or a part number) for the RJ45 breakout cable to alligator clips, RJ11 and CAT5?

[@edshepherd3118]

Great help ?this shuts off . How do you keep this on longer time

[@killerclownthao964]

can ou Turn the Toner off and On if you wanna test the Copper Line back To socket ?

[@cameronolson1917]

4:10 which pins is he connecting the alligator clips to? That looks to be a cat5? Thanks for your help!

[@epikx1934]

Where could I find the rj45 and rj11 alligator test leads? Could I simply build my own or is it easier to buy replacement ones?

[@torstenfrancke5776]

Great video, preage can you provide Information (manufactur / Type) about to buy the cable from Rj45 to Rj45, Rj11 and crocodile?

[@epikx1934]

Did you find what you are looking for? I am looking for the same thing

[@n0ah0lsen]

thank you

[@ed.t.hansen6499]

wish it worked like the manual. goind to service mode does nothing; no lights anywhere. but tried it on working cables, test cables. all the same.; Service does nothing.

[@paddypantsable]

does the toner produce audio in speakers?

[@chrishill5919]

nice

[@mikeadler434]

👍👍

[@geoeconomics3067]

Black Sheep
if one wire in the cable is broken 20 feet from the tone generator
you will still hear tone at the end of both wires
tested
Which means tone SIGNAL is induced in the bad wire from the good one
Which means THIS TOOL IS USELESS IN FINDING BAD CABLE
ITS ONLY USED TO TRACE WIRES

[@bjre.wa.8681]

very bad audio. I couldn't hear what he was saying.

[@uploadJ]

TURN UP YOUR VOLUME