HOW TO FIX ROD KNOCK FOR $10!!!
Vložit
- čas přidán 2. 05. 2017
- Hey y'all, this won't actually completely fix your problem, it'll just make it unnoticeable. And please, don't just pawn it off to some other person without them knowing about it, there is no actual way to fully fix a rod knock other than to rebuild the motor unfortunately. Drop a comment, thanks for watching home slice 🍕
Instagram:
etanowen
etanowen?h... - Auta a dopravní prostředky
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
when adding oil 98% of people do it wrong. The oil bottle was designed in a way that you don't spill it. Flip the bottle the other way, so the spout it on top not on bottom. This will allow you tip tip the bottle further before the oil comes out.
Or if you have a 5qt jug you tip it on it’s side if you don’t have a funnel
@CiscoLocks and 5 gallon bucket the spout should always be at the top when near full
I think your problem may be that your oil is blacker than your truck
Justin Fincher I laughed pretty good at this one 😂
MOTOWENS kan this work on a atv like a 250
dank moto life bro it can, but I would recommend The Lucas thick oil. It'll just make it sound better, not fix it
Justin Fincher 😂😂😂☻
Justin Fincher hahahahhha
🤣🤣 i’m in the process of rebuilding my motor due to a rod knock. and someone sent me this video. I really needed a good laugh.
Thanks kid 🤣
“Now sell it while you can” I felt that😂💀🤝
Facts lol
Priceless
😁
I ain’t that type of guy. But that had me thinking😭😭
@@laytonbulter1293rh❤ Jo❤❤❤rrh❤he❤hhh❤g❤h❤❤h😮❤❤h😂he❤e😂❤hh❤hrh eh❤h❤eh❤h g❤h❤❤jhe he rhrhehhh❤r❤❤❤r❤rrr❤❤❤hh❤h❤rhh❤ Huhh❤❤h❤❤h❤❤❤h❤❤h❤h❤h❤ hh❤h❤h❤h❤h❤h❤❤h❤rh❤❤rh❤❤❤reh❤❤❤❤r❤❤❤h❤h❤h❤hh❤h❤❤❤h❤h❤❤❤hr❤❤❤❤ Hu❤hh❤hh❤❤hhhhhhh❤❤r❤h❤e❤rhr❤rh❤h❤❤❤hh❤❤❤❤h❤hu❤❤❤❤r❤❤❤❤❤❤❤❤h❤r❤❤h❤❤hh❤❤❤ ❤❤❤❤❤❤❤❤❤h❤h❤❤❤hhh❤❤❤❤❤❤❤❤❤❤❤❤❤❤hhh❤❤❤❤❤❤❤❤h❤hh❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ her herhh ja Hu
"I'm just gonna drain a quart of oil because I don't want to do a whole oil change." There's your problem, right there, duuude.
hahahahaah fucking funy
this kid is special on so many ways, and i dont mean short bus special i mean straight jacket padded room safety helmit special, if you have a rod knock you usually have jack shit for oil pressure left and it wont last but a few more hours on the road i dont care if you pour premium high octane pixie dust in your oil filler the instant you gotta rod knock in your daily driver you just entered a world of shit unless you just got all kinds of money, but lets be honest who does
Lazy
Shit looked like glue
Lol
Heh, "Sell it while you can!" Thats the best advice in the whole thing :)
Ryan C I’d say trade it in at a used car dealer. I could not in good conscience sell a car that I knew was bad but sticking a used car dealer with it would give me some satisfaction. And hope they couldn’t sell it before it starts knocking again...
L m f a o , I agree but not in good conscience to someone else
Mine was bone dry and I started hearing
This is an honest video. Everyone does crazy stuff to save a buck, but he admits it openly. 👍
The new owner watching this video like 👀👀👀 I know that dude lmao
@@memesyandhorrorshorts🤣🤣🤣
YEAHHH,, bought a 86 fiero and thats what the seller did
Red neck Justin Bieber
@@Papichulol8037😂😂😂
"Get out of my neighborhood!!" Best part of the whole video ... 😂😂😂
How could anyone dislike this. I mean i was entertained. 😂😂💀💀
Same her
😘
Agreed 👍 I liked when he was drinking it 😆 lol
Facts
Who looks at engine knocking videos for entertainment
Honestly this video is gold😂 and I’m literally in the same boat so this helped a ton! Keep it up bro you’re hilarious, that last line had me dead😂😂💀
Dude I know I am late on this video but this was so funny I literally almost choked laughing so hard even though you guys know what you’re doing I hope you become famous because you guys are funny as hell freaking rock on
I have been using RISOLINE & STP every time I do a oil change with good quality motor oil. Don't Overfill More Oil Than Engine Required. Always Change Oil Filter.
Change Oil, Filter With Oil Additive Every 5,000 minimum to 8,000 maximum miles & Engine Will Last.
Check Motor Oil, Transmission Oil Levels, Antifreeze Levels Every 1,000 miles. Only Use Specific Type Of Transmission Fluid For Vehicle Type. If Wrong Transmission Fluid You Will Ruin Transmission In A Short Time. Always Check Transmission While Vehicle Engine Is Warm Up & Running. Never Overfill Transmission Fluid, As This Will Also Damage Transmission In A Short Period. Make Sure When You Open Bottles To Cut Out Aluminum Seal On Bottle, Heard Of Aluminum Seal Getting In Engine Oil Fill & Causing Damage. Keep On Trucking.
You forgot a very important step in this video tutorial. After draining the quart of oil, you separate all the glitter from that oil and put it back into the engine so it can re-attach itself to where it came from!
😅😅😅😅😅
🤦
The "slow" older generation can't tell that he's being sarcastic the whole video. I'm pretty sure he's showing how most adults make their CZcams tutorials; talk like they know what they're talking about but look like they've got no clue on what they're doing. I have a video queued of a 45 year old man believing that a charge regulator was his ignition.
😂😂😂😂😂😂😂😂😂🤣🤣🤣🤣🤣🤣🤣
🤣🤣🤣
this was hilarious.
you my friend earned a subscriber
Same
I came here because i am trying to sell a vehicle that has a rod knock, so the ending of this video just killed me 😂😂😂
how high are you bro? on a scale of 61 to 289 rate your drugs?
Zackary West 300😐
420
On a scale of 69 to 420
289 bro all day 3 on dem trees
This is what sober looks like
0:01, 1:42, 4:06 When you contemplate on the spot, what is the meaning of life before soaking up the courage to continue going on like this
Seriously, good for you kid. There are not as many people in your age group, or even as young adults, as there used to be that want and are willing to learn the skills needed to take care of a vehicle. While I agree that you should probably change the oil fully since it's pretty bad, I applaud you for KNOWING HOW!!! The biggest problem with a lot of vehicle related maintenance and especially with a lot of gear heads that build their rides to be fast, lifted, lowered, _________ (fill in the blank) is their personalities and attitudes. While competition is great to build skill and knowledge, way too many of them take it to extents of pettiness. It's sad really... They feel superior by their severely inferior mentality. Once you get around the smarter, much more mature group of gear fanatics it's an entirely different level of learning and enjoyment. EVERYTHING that has to do with cars, regardless of whether you know everything or are beginning, like I am, or invent the fastest ride to ever exist, you'll have haters over stupid shit rather than respecting you and appreciating your work! I think it's awesome you're learning this stuff. I'm 33 years old and do not have anyone to show me how to work on cars or teach me. I found your video because my car has a knock in the engine and I am in my own to fix it. Use the haters comments as fuel lol, just don't become one of them!! Best of luck, and thank you for the video. I'm gonna buy and use those products after I do my oil change to hopefully buy me some time to figure out the cause of my car's problem!! Take care!!
Leslie Tolman You're fucked
Oil does not take care of rod knock.
Rod knock is the equivilant of your rod conneter rolling around on the crankshaft journal. As its doing that it getting hot. Its getting hot because it not properly getting oil coating to inner bearings that should be there. So as its heating up its warping and eventually will throw a rod through your engine block. Or completely fail.
midmo nobody bro theres no point in trying to educate this type of people
This was 4 years ago but very helpful and really entertaining 😭😂thank you
The last line made the whole video worth it. "Sell it while you can"
That opening "hi" was great lmao
Did you try drinking some of that crap before you made the video....?
I freaking love this video, I watch it at least once a week just for entertainment. But educational wise you are also on point. Thanks for the video bud like your most recent one also. ✌️🤟
1:56 we lifted the truck up on dirt and it basically just sunk back into the dirt...
steven neufeld haha yeah pretty much😂
When your driveway is made of unsurfaced asphalt it tends to sink with stands so I don't know why people say it's safer when my jack doesn't sink.
Oil so black it stole your engine
That is so racist
@@datdealracing7219 so what youll say its so grey its so black so dirty
😂
Hope he don't shoot up his school ..😝
That's was racist but funny asf
god damn thats some black ass oil lol
I love this kid!!!! Who wants to watch a boring video when you can have a lil laugh and be entertained!
This is my brain talking to itself every time I work on my truck
This might be the greatest video I have ever seen.
He took one quart out and that was just about all the oil in the engine
I love this guy!!! Keep it real Brother, much better than those stuffy professional videos!
BEST "How To Video" ever!
Bro great you fixed my car I thought I was screwed! This worked so well I can still hear it knock a little and my engine smells like a fireplace and smokes a little but she runs!
If anyone didn’t realize this was a joke.
Just cut the muffler off ! then it'll be louder than the rod knock. That oil is only going to quiet it for a little while and then the engine is going to go. You'd be better off putting in new bearings. Yeah it's a lot of work but it's cheaper than a new vehicle.
Deadass that's what I did
@@bill7575 how long it held up
@@coreyj.7776 about 90 miles lol
@@bill7575 damn man lol. I was about to do this cheap fix but I guess not lol
I'm sure you've already dealt with the old chevy 350. But they notoriously have lifter issues when getting up in miles and its difficult to tell the difference in a collapsed lifter knocking/ticking/chugging, to the sound of a bottom end rod knock. Typically the bottom ends are pretty bullet proof on those trucks unless you starve it of oil, which caaaaan happen if the oil pump o-ring goes bad with super high mileage, but you would have very low oil pressure which you can easily test. More likely it is a lifter. It would not cost too much to pull the heads and replace the 16 lifters&headgasket and picking up a used camshaft for a total of like 200-350$ and do the job on a weekend. It's fairly straightforward and plenty of DIY videos. BTW you're a fucking goober and I find it hilarious when you blow shit up. Oh, and ALWAYS get your 2stroke bikes jetted properly so they don't fry rings/bearings/etc. If you don't know how to it would be worth paying someone to properly jet it, and do your best not to engine brake excessively. Oh, maybe pay a bike/car tech to come help you buy shit and give you the A-okay bill of health. But keep doing dumb shit buddy!!
Is this lagit? I’m in this exact situation I do believe
I wouldn't say the the bottom end of those are that solid. They like to spin bearings if revved to high
Definitely one of the most painful DIY videos I have ever seen.
Now sell it while you can!! Lmao he might not be so stupid 😂
Bruh im over here stressed thinking i have to replace my engine and u making me laugh wtf i dont kno how to feel 😂😂😂
ROFL absolutely the best automotive how to video I have ever seen....
Do you add the foil seal you jabbed into the bottle into the motor aswell?
This whole video is a MEME 😂
Does anyone see the ramps are like dugged in the ground. This kid is crazy!!
Roflol pure genius!
I think this video was awesome! 😂 very entertaining!👍🏼
Your cameraman is awesome for not laughing his and or her ass off during this taping
make Shure to wipe dads ratchet off
month later dad grabs the rachet gets hand covered in oil and thinks to himself {that fuckin kid}
😂
What year was the STP? I heard that 2013 was the best vintage.
🤣🤣🤣🤣🤣🤣
Just bought a 94 Sierra with the same problem that's why I came here awesome video freaking hilarious
SUBSCRIBED. Don't want to miss an ounce of this gold.
Nobody couldn't have done it any better.
The fancy engine-fixer oil isn't going to fix anything if you don't do a real oil change.
Which is why we have the saying "You can't fix stupid".
If FRED was ever a mechanic
I genuinely enjoyed this video. Not sure if I'll follow this method but will be checking out his other videos for more tricks of the trade.
Ok right of the bat I cringed but now I'm laughing my butt off
"Sell it wile you can" lmao
The way He looks at it when He started it 😂😂
That shits hella funny! Nice vid guys!
“Now sell it while you can “
When adding oil, there’s a new invention called a “funnel....”
J Mac 😂😂😂😂😂
“Now sell it while you can!” Hahhahah I will thanks 🙏🏼 😂
Just add some in my engine ,Iets see If that knock goes away!!! Thanks for the tip.
Is this a sequel of DUDE WHERE'S MY CAR..
Have you changed the oil since the truck rolled out of the factory
HOOKAH SPOT I don't reckon😂
My engine may be toast but this was a good laugh to cheer me up
I had forgotten why I came here just watching the first 10 Sec, remember kids, check your oil on the stick thing! Lolololol!!!
had a knock .. got a full oil change and I get half way home and I hear a big boom and the car shuts off and I get out and oil is pouring out the bottom of the engine and a rod is 10 ft behind me
Hundo
i call bs, engines dont go boom when they blow up, u hear a loud clunk clunk for about 2 seconds and ur engine locks up and shuts off
They go boom too lol I blew a Mazda engine up once and three of the 6 cylinders were actually still good I believe the rest went out the big hole in the pan along with a mile line of oil to boot lol. Well that's what ya get when ya girl sends a pic with come get it as a title hehe.
Well they probably forgot to add the yellow bottle.
#AutismAwareness2017
Walking abortion.
MOTOWENS get outta my CZcams
Halfway through to the “oil change” I’m dying 😂😂😂
+MOTOWENS - I thought of you today :D... I had to make my own Formula... 1 Ounces of GUMOUT for every Quart of Oil + 1 Quart of Transmission Fluid. Ran for 50+ Miles... Change the Oil/ Filter.... Now the Engine is SMOOTH as hell :)))), it worked !!! YEEEEHAAAA !!!
You don’t have to completely rebuild the motor, just replace the rod bearings. That’s what it sounded like to me any way
Is that a possibility?😊
@@swagkidm10 It cost about the same unless you're mechanic
Lmfao my boy said sell it while you can lmfao
My baby threw a rod today and somehow your making me laugh thanks man lol
My baby took a rod today.. Im still Crying
Ok idk if lil dude was playing or if he is just that goofy...but I was definitely entertained...🤣
I think ill add some blinker fluid and change out my muffler bearings to fix my rod knock. ill be good
Should sound like a new car
Don't forget your piston return springs
3:54 you're doing it wrong
LMAO you definitely just got a new subscriber🤣🤣
This kid is funny as hell. "Sell it while you can."
You never want to mix good oil with bad oil. Lol
Justin Bieber does oil additives? nice
This quarantine really got me on some new shit
That dude is Rich. He just struck Black Gold 😭🤣😂🤣😭
I forgot why I joined the video and just kept laughing
"Sell it while you can" in other words the motor is still bad, let it be someone else's problem while you rip them off lol
F’n hilarious dude! Thanks for the tips!
Did u tighten that drain plug up or just leave it hand tight
Wasn't you the older brother from the movie E.T. 🤔❓😂😂😂
Kai Spirit yessir
That was very funny and perfect . Your right tho, does look like him
“Now sell it while you can”🤣
I have a 98 Chevy with a loud knocking noice an I’m not sure if it’s the same problem cause when I press the gas pedal my revs go up but I don’t get any wheel spin
1/2 million views?….rock on little dude!
These comments are the best😂
2019 n beyond
Give your self a pat on the back.
All you did was add a band aid to the problem.
At least he can change his own oil--that's better than 95% of other kids his age lol...
I'm just glad you know how to do basic maintenance
Young mcjugger nuggets lmao
"Now sell it while you can" just put the cherry on top
Seriously bro you really should think about doing a oil change that ALSO helps lubricate i no it's hard to believe then you might not have a issue at all hats off to you sir you have learned well..
"Cleetus! What in hells name are you doin' to daddy's truck? Shouldn' You Be Helpin' momma cook supper?"
Another central Oregonian, I’ll be damned.
Good quality humor! 10/10
Lol 😂 I was entertained..... I thought he was acting ..... but he really was 😂😂
Buy a $10 bearing, and replace it. That's how you fix rod knock.
James B with like 30 hours of work
MOTOWENS actually my buddy and I did just that after their van had been run without oil. It had spun a coupl rod bearings and it was knocking very badly. You could grab the bottom of the rod and move it by hand. It is a DODGE 3.3L V6. We put all new rod bearings in, cleaned out the oil pan and oil pickup, put fresh oil in and had it running again in about 3 hours. Around $50-60 in parts, oil etc... It's still running fine over year later and they drive it a lot. I never would have thought it would last that long if I hadn't seen it myself. Of course it's front wheel drive and the oil pan was easily removed, probably not so easy on a rear wheel drive pickup.
your gonna be spending 30 hours cussing at your blown up motor like you did with that FUCKING KTM!!! and that POS YAMAHA, you gotta put out to get out when it comes to motors, if you "only drain one quart cause you dont wanna do a full oil change" you can expect to be walking everywhere in a few days, if you 1/8 ass the fuck out of everything you cant expect to get more than a fuck you in return
James B do it work
Thanks for the info James B
Now sell it while you can 😂😂😂😂 that’s what brought me here!!!!!
This is the high-tech version of stuffing a (peeled) banana into the engine before you meet the buyer.
This kids going places!!!