50cc GY6 Performance Ignition (cdi box & coil & plug wire) Worth it?
Vložit
- čas přidán 19. 06. 2022
- Today we are testing a 50cc GY6 Performance Ignition (cdi box & coil & plug wire) and if it is worth it? You can be the judge. In our case, yeah we needed it. our scooter has a lot of miles and this was maintenance that needed to be done. For $11 its a good deal, all of the parts worked and made the scooter run more smooth.
MERCH LINK
throttletherapystore.myspread...
INGITION KIT
amzn.to/3N6cBx1
DISCLAMER I am an Amazon affiliate and may make commissions on the products linked here. - Auta a dopravní prostředky
I bought the complete kit from j and j for 99.00 and the carburetor didn’t run right so l bought a carburetor from Amazon. After installing the carburetor and the CDI box, spark plug and coil. ( looked just like yours). It runs at least 15 mph faster. Very happy.
15mph more!!!??
Which one you order?
Hard to believe you pick up 15mph. Unless something was really bad from the beginning
The Chinese bikes have hugely retarded timing and very low peak RPM so they can run on on very low quality fuel, these CDI's advance the timing to take advantage of better higher octane fuel and remove any top speed limiters. @@cafemotorsports
THANKS FOR THE KNOWLEDGE, MY 50CC CDI WENT OUT ON ME. I DIDN'T KNOW WHAT IT WAS. IT MUST HAVE COME LOOSE WHEN I WAS DRIVING BECAUSE I HEARD SOMETHING DRAGGING AND THEN MY SCOOTER CUT OFF. I LOOKED UNDER THE SCOOTER AND SAW THE CDI HANGING. TIME TO CHANGE IT OUT. ✌️👍🏻
Definitely recommend Amazon cheapest big bore kit it definitely helped my Tao Tao in every area
This may be slightly older video but i've been watching some of your videos and i think they are fantastic! i am currently adjusting and tuning and messing around with my Yamaha BWS 1996 (sold as Zuma in the states) 😃 and i find your videos very helpful!
Thanks! glad we could offer some help🤟we want to get one of those eventually so we can explore something with higher quality than our taotao!
I made my own spark plug wire out of two, 8 gauge wire,works great
Thank you for the great content. Gonna order that kit for sure. Props for wearing a helmet, protect ya noggin.
Hey! Thanks for the kind words. A heads up on that kit tho.. it ended up wearing out pretty quickly. We had to switch back to the stock stuff. It did run well with it. But it stopped working for some reason after about a month
I put on a blue racing cdi on my 125cc gy6 atv and it made a huge difference in acceleration and the engine revs higher
Yes you could definitely see the difference especially if you can get higher RPM out of the engine the engine won't rev over twelve thousand with no problem get a performance camshaft and a performance cylinder head with bigger valves
got the same kit and put it on my 50cc +bbk 88cc Roketa, Same results you got, runs good with no issues also but not really seeing much in performance, but alot of ppl say they die out after a few hundred miles. goin 250mi so far so good.
🤘 if it ever goes out for us we can make an update video
@@throttle_therapy my only struggle right now is figuring out the right weights for the CVT. im still on the break in period on the BBK so i cant go WOT, but i had a 82cc bbk on it before and was only getting 42mph max with the 8oz dr pulley's, the 7oz, 8oz, and 9oz all gave me about 42mph top speed with slightly different ranges of RPM while accelerating. havent found the secret sauce to get this thing to hit 45+ yet but soon hopefully
@@NotThePulla you got this. It is a struggle trying to fine tune for sure. We are doing that right now and feel the pain
@@NotThePulla I own a 70s moped (piaggio bravo) and bought a polini variator and love it. Do you know about contra springs and know about mixing up the rollers? You can even switch to sliders for more performance. The key is checking for the wear on the ramp plate to get to the very top as possible (showing the RPMs have increased) or if you're a conservative person that you want to stay in lower rpms like me.
@@JaredD Yep ive actually mixed yellow/red springs for my clutch to try and get it about 1750rpm grab point, and then also i have a mix right now of 7g dr pulley sliders and 8g sliders to make for 7.5g but that day it started raining and i didnt want to keep top speed testing lol, ill take a run to the mailbox today with it and see how she likes the lighter sliders
Thanks!
Thank you! That is very generous! we appreciate you
I have bought a couple of cdi boxs both oem and high performance but when I install them my scooter won't start. Any ideas?
it was good meeting you and I got a 2 stroke you will have to come over sometime
Heck yeah dude. Good to meet you as well🤘
@@throttle_therapy what is your number
@@derrekstolp2527 dm us on instagram
I bought the same one off Amazon. Blew a fuse. Didn't work on my Kymco. Said it was DC. I put the stock one back on until I find one that works.
I need to get one of these to get groceries!
Yes you do
Be prepared for multiple trips!
Chcesz osiągów tanio to wymień żarówki na Led, przerób ssanie na ręczne i będziesz miał mniejszy opór na magnecie 😉
kurde panie powiedz mi, mam skuter z 12 roku, zipp toros f16, stał w garażu większość swojego życia aż w końcu ojczym mi go oddał, nie wie pan może co tam z nim łatwego w miare można zrobić żeby trochę szybciej reagował na manetke? na razie to jakbym przez wode rowerem jechał
@@damianosplay9457 swap gaźnika na pz16mm
@@progaragechinskiemotorki dziękuję, słyszałem również że wymiana ciężarków wariatora na lżejsze z tym pomaga, to prawda czy kit mi gość wciska żebym 3 dychy u niego wydał ?
@@damianosplay9457 prawda są filmiki proszę pooglądać :) ,,rolki a moc silnika"
Thanks for watching!
Will a new CDI box stop my lights from blowing just replaced the lights today 😢 and blow
What’s the best way to increase speed on a 2019 50cc Amigo??
hey , i need help if you know about aprilia sr150cc , want racing kit clutches etc, engine valves, & gy6 carburetor , is it works on aprilia? give me all information in case you know about racing performance kit !!
It has nothing to do with this video but I bought a upgraded jet carb and broke down twice. $25 for carb and $70 to repair so it broke down again,150 for towing, and 50 to install.
Can you please help me the carburettor and some wires please because I want to do my do the front
How to make your 4 stroke 50c c. Scooter go faster
Is 6000 miles a lot for a gy6 scooter mine goes great after over 17000 miles
Sold my Chinese scooter yesterday and just bought a 1994 honda elite today. Going to try to find the best performance parts for it
Heck yeah! Sounds fun
Swieca irydowa taka wpadła mi do cylindra po 400km ceramika odpadła od wibracji silnika 110cc
Will this fit a Kimco agility 125 cc?
i tried the orange cdi...for some strange reason it won't run worth a crap when the headlights are on...
Yeah. We found this out in later vids... its actually not great
Cewka daje słabszą iskre, moduł nie ma wstępnego wyprzedzenia zapłonu tylko stały kąt taki jak po 3800 obrotów seryjny moduł
The Chinese seem to avoid resistor plugs = just fine.
My point is keep it oem.
Got a pink schwin that I'm getting going. Wonder how it will work in that. Lol
Hopefully it scoots! We should rip around town if you get it going
Orange plastic is not faster in my experience.
We just found that out.. next video coming on Thursday stay tuned
What's the mph app called ?
Its called Drag racer
my scooter max speed is 70kmh and i have 13 years old this scooter
my gy6 max speed 130kmh，25year，340000km czcams.com/video/scHj3DhD59U/video.html
My scooter wont rev over 7800 rpms, would this help me get over that hump?
The dc one removes the limiter
What's a cdi box
its basically the brains/computer for the bike
Absolutely not worth it. As a 50cc displacement, you’re only going to get so much power. Keeping it well tuned will be ideal for performance. The only true mod that will get you significant power increases is a big bore kit. The other stuff (roller weights, CDI, carburetor, etc) will not make much difference (maybe 3 or 4 mph). At the end of the day, you’re still depending on a 50cc displacement engine.
Not sure I'm following your logic. If I had a scooter that topped out at 25mph, and could buy a carb and roller weights for ~$50 that have me 4 more mph, that's over 15% improvement in top speed.
Seems like a bargain. 🎉
Also nice easy mods to familiarize a new rider with their bike's operating system. ❤❤❤
@@jacobzurawski yes, you are correct-100%. I guess what I’m trying to say is for ME, personally, 3-4mph is not worth the effort. However, if it’s satisfactory for you, then I say go for it! I love mopeds. I think they are an economical and fun way to get around for basic transportation or just some fun bouncing around the neighborhood.
No it doesn't do much you notice a difference.
Don't nearly set my bike on fire
stock is better then orange bullcrap you gona be sad when it leaves u stranded on the side of the road xD
well dang....this is a late night post
You're up past your bed time.
U won't notice the difference
Buy a bigger scooter.