HOW TO TEST CAMSHAFT POSITION SENSOR ON HYUNDAI ELANTRA SONATA SANTA FE ACCENT VELOSTER TUCSON

Sdílet
Vložit
  • čas přidán 10. 05. 2021
  • HOW TO TEST CAMSHAFT POSITION SENSOR ON HYUNDAI ELANTRA SONATA SANTA FE ACCENT VELOSTER TUCSON
    If you have Hyundai and you need to test camshaft position sensor on Hyundai we will explain that in this video. We demonstrated how to test camshaft position sensor on 2013 Hyundai. It is not very complicated to test camshaft position sensor on your Hyundai. We demonstrated how to test camshaft position sensor on Hyundai Sonata but the same design and procedure may apply to multiple Hyundai models during the years. This video may be helpful on:
    Hyundai Sonata Test Camshaft Position Sensor
    Hyundai Santa Fe Test Camshaft Position Sensor
    Hyundai Tucson Test Camshaft Position Sensor
    Hyundai Elantra Test Camshaft Position Sensor
    Hyundai Veloster Test Camshaft Position Sensor
    Hyundai Genesis Test Camshaft Position Sensor
    Hyundai Accent Test Camshaft Position Sensor
    ►► Which Battery Terminal To Remove First: • Which battery terminal...
    ► Camshaft Position Sensor (check for your car): amzn.to/39Ccc3O
    ► Alligator Clips: amzn.to/2Xhxz2O
    ► Voltmeter: amzn.to/2LYoqf7
    ► Mechanic Tool Set: amzn.to/2Kq4EJ0
    ► Scanner That We Use: amzn.to/30f3HbC
    ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
    ► Our Website: mechaniclifestyle.com
    ► Our Baby Girl Channel: goo.gl/WiVs8Y
    ► Our Second Car Channel: goo.gl/XB6fHq
    ► Honest Product Review Channel: goo.gl/sMPQXk
    ► GoFundMe Link: goo.gl/pUife3
    Our Most Popular Videos:
    ► Bumper Repair: goo.gl/XBe4Sh
    ► Missing Wheel Lock: goo.gl/5n4a5i
    ► Bearing Replacement: goo.gl/JSNDnZ
    ► Restore Headlights: goo.gl/qVhDkf
    ♦♦♦ Cameras & Gear Used For This Video ♦♦♦
    •Cameras
    Panasonic Lumix FZ300: amzn.to/2BNWtNA
    •Tripod
    Polaroid 72-inch: amzn.to/2iVTmP4
    •Microphone
    Polaroid Pro Video Condenser: amzn.to/2krpSsA
    •Light
    NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
    •Computer for editting
    Lenovo ideapad 310: amzn.to/2kqUNFl
    ♦♦♦ Other Equipment and Gear that I use ♦♦♦
    •Camera
    Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
    •GoPro HERO5 Black: amzn.to/2ktNKfj
    •Extra Computer For Editting
    Lenovo Ideapad 510: amzn.to/2ktOuB7
    ► Like Us on FACEBOOK: / worldmechanicsofficial...
    ► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
    This is not a sponsored video. Everything is purchased by us!
    The video is meant for entertainment purposes only. Do not Attempt!
    AMAZON ASSOCIATES DISCLOSURE
    Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
    *Disclaimer
    We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
  • Auta a dopravní prostředky

Komentáře • 28

  • @AutoRepairGuys
    @AutoRepairGuys  Před 3 lety +2

    ⛐ Check out our Garage to see what tools we use and recommend:
    www.amazon.com/shop/worldmechanics
    ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: czcams.com/users/AutoRepairGuys
    ⛐ Our Donation Link: gf.me/u/y59hvn

  • @lulnoserotonin
    @lulnoserotonin Před 2 lety +16

    Video starts at 1:42

  • @ridewithidris
    @ridewithidris Před rokem +1

    At last I was able to solve my P0016 code.
    Firstly, I flushed my engine oil with an engine flushed them changed the oil a second time -- code didn't go away.
    Next, I changed my crankshaft position sensor--- no improvement,
    Checked my VVT solonoeid too and it was working fine.
    Finally I went to the mechanic to check my timing chain and Alas, it had jumped. It was fixed and now my car is driving smoothly again.
    Thanks for this video. It has really helped me. I was already thinking of selling the car off.
    (It's an Hyundai accent 2012)

  • @sauldiaz4012
    @sauldiaz4012 Před 2 lety +2

    Sir thank you for knowledge. It’s men like you that keep young techs like me motivated constantly learning !!! Thank you boss !

  • @michellemartel7496
    @michellemartel7496 Před 2 lety +1

    Thank you so much!! I've watched so many videos looking for a low tech way to diagnose mine!

  • @alikamal8790
    @alikamal8790 Před 3 lety +1

    Important test thanks guys

  • @thabisoteemasango7622
    @thabisoteemasango7622 Před rokem +2

    I have a Hyundai Tucson V6 2006 the engine start but when I accelerate it stalls. I tested the camshaft position sensor as illustrated it read 4.88 on the socket but when I connect the camshaft position sensor the reading goes down to 0.76 before I place any metal on the sensor. Is the sensor bad?

  • @lollove5066
    @lollove5066 Před 2 lety +1

    Thanks for your video.could please tell me what would be the voltage incoming to the sensor.When I check my sensor adapter code itself I can see one side 4.8 and the other side only 5 volt when I tested with voltmeter.My car is Hyundai Elantra 2018 Korien made.From your video I understand batery side should be 12 volt.

  • @rajapandori6655
    @rajapandori6655 Před 3 lety +2

    Good job

  • @mohammadal-gebaly3046

    Awesome , thanks

  • @atriqgoussous
    @atriqgoussous Před 2 lety +1

    man how can I contact you because I have a Hyundai tucson 2.0 2007 "same elantra motor 2007" I need to know to proper positon sensor to use becuase i used like the one that you have in the video but the car wont start !!! .. what can i do ??

  • @millsfamilyfarmmusic9562

    Mine stays on .01 until I bring the wrench back to it and sometimes it doesn't change from 4.8 my car died while driving and won't crank over but has full power 12.6 on the battery power going to the starter. And signal just won't engage

  • @vt1100
    @vt1100 Před rokem

    Kiedy był zimny wszystko było ok. Kiedy się zagrzał zaczynał wariować. Wyjąłem z gorącego silnika czujnik wsadziłem do lodówki na kilka minut i zamontowałem do gorącego silnika.... wszystko było ok.

  • @alexgallo6396
    @alexgallo6396 Před 2 lety

    Can you post a video on how to remove it

  • @stephenmcgraw3610
    @stephenmcgraw3610 Před 2 lety

    Is the key on when u do this

  • @eldurodelbx1
    @eldurodelbx1 Před 3 lety +1

    Where are I guy located.

  • @seragali1353
    @seragali1353 Před 2 lety +1

    My car is Sonata 2009, American import, engine 24. It has a malfunction. When the rpm reaches 1500 revolutions, the engine shakes, whether it is moving or standing, and results in a weak engine torque.. I went to the technician more than once and he connected it to a fault detector, but to no avail without any result. .. so what is the solution?

    • @adriangabrielb
      @adriangabrielb Před 2 lety

      I have exactly same problem. My Elantra shakes only at 1500 rpm with no code. Do you resolved it?

  • @kevinn4038
    @kevinn4038 Před rokem

    I have a 2019.hyundai.elantra that will start but not go forward or backwards. The check engine light came on. Autozone said camshaft sensor. The rpms would drop to 0 while driving. Now its starts goes into gear, just wont mive. Brakes aren't the problem

    • @benin9773
      @benin9773 Před rokem

      I have santa fe 2021 and the vehicle drives well but at times stalls at red light and i havr to tirn it on again and when driver longer than usual the rpm goes to ZERO .I don’t drive on the highway because when i speed up to 40 or 50 it statts hesitation or losing power .Light engine comes om and off .
      few days ago It was diagnises to have bad cranshaft position sensor .Another mechanic told me its transmission !
      ADVICE PLEASE

  • @akkachai47
    @akkachai47 Před rokem

    I have 2017 elanta 2.0 l the car running fine until when I slow it down everything is shutting off, all the warning light are blinking, I try to start again, but nothing happens until I wait for couple minutes and try to start again, it start and run fine. do you have any idea what wrong with this problem? it happened almost everyday now.

  • @user-ib8oe9mn8f
    @user-ib8oe9mn8f Před 3 lety

    Perfect

  • @adnabandasha3201
    @adnabandasha3201 Před rokem

    Ok ok ok

  • @carlosalbertosalazarporras6409

    Ok, ok, ok, ok bla bla, tired ok!