thanks a lot a lot a lot, at last I have found the real explanation of how it looks inside how works and giving tips what is important in cleaning and replacing
Hi thank you so much, explained very well how to take the thing off. I think it would be easier to dismount the whole assembly (valve+cooler) instead of separating the two. But I did it anyway because I wasn't certain this would be my issue. Sadly, one of the screws going into the exhaust manifold broke, so be careful to, maybe let your engine heat up a little beforehand? Or maybe put some WD-40 on those two screws. Last thing you didn't mention is the mileage, mine had 180k kms and looked as dirty as yours, I also had the error code (low egr pressure) so if anyone has the error code and that much kms, it's almost certain that this part is the issue
Nice video. Did you lose much coolant when removing the pipes? Did the system need coolant topping up and bleeding for air, once everything was back together?
Hi thanks for watching it. The valve unit i guess it holds around half a liter of coolant or less and it will leek a bit when removing. What i did I kept all the blanks of new fuel filters and used them to blank pipes and had no leaks while waiting for the part to arrive. Topped up just a bit and then run engine till it got to 90 and then check level again. If you do it yourself home make sure you get it somewhere to calibrate the EGR valve on the car otherwise it will get blocked again quickly and say every 50k miles take it of and clean it . Keeps engine and dpf happy
@@timgoldsmith9126 i have struggled with an Allan key torx head tool. It was a pain because i had a long one only at that time. I have bought that t30 while i was waiting for the part to arrive. Go ahead and buy yourself one because it needs taking off the EGR valve from time to time and clean it so you gonna need it . Like share and subscribe. God speed.
@@lucasborka3714 i don’t really know with vcds, i have a icarsoft pro and Obd eleven and just clicked the calibration button and heard a clicking noise from valve and that was it .
Again, great video. I need to replace my Egr on our 2012 a4 avant as the garage quoted £700. Please tell me, what tool is needed to remove the pipes you pointed to at 10:52 with the large star like heads. Thanks again for your video.
Clarke CHT144 40-Pce TORX HEX Star Socket Spline & Bit Holder Set And i’ve use the bit with a ratchet spanner to save space and I managed to get them loose. Make sure you use a bit of cloth to loch the bit in the ratchet spanner so you don’t lose it and it will work as a charm. There is not much room. Next video will be about how to change you hex drive key of the oil pump because it will round it off and won’t drive oil pump and you will have engine failure. Thanks for watching, please subscribe.
I am doing my EGR right now and thanks to your help I have it off. Access is real tight ay. Just a quick one, when fitting the new valve and cooler do you fit it dry straight out of the box or do you need to fill the cooler with coolant first? Thanks again!!
Merhaba ! P0403 hatasi olustu Bende . Kablonun girdigi siyah kutuyu Actim. Ici gercekten su olmus Sizce sogutucuyu da temizlemem gerekiyormu? Sogutucuyu acsam temizlesem geri takarken eski kecesi ile taksam bisi olurmu? Iyi günler iyi calismalar
@@ciprianandronescu3339 Hai fatto bene! Tentare di pulire i passaggi nello scambiatore è molto rischioso . Sono molto sottili e di solito leggermente intaccati dalla corrosione galvanica . Da ex meccanico posso tranquillamente affermare che in questi casi L’ unica soluzione è cambiare tutto. Poi invece se uno vuole rischiare, affari suoi.
Salutare ,da, EGR trebuie calibrat pe masina ca sa deschida fluxul de gaze la parametrii normali . Like share si abonare , am si alte clipuri cu vag pe canalul meu.
Hi, thanks for watching. Don’t open it on the car itself. Take it completely off the car and then open it. There is a steel seal and you can’t tighten it properly . You will find then the right torx
@@risting-pc-service5150 no no, i’m saying that it’s easy to clean egr and cooler unit when it’s completely taken off the car . Then you can easy open and clean and proper tighten torx bolts to put it back toghether
Grazie al tuo video ho scoperto che nella mia b8 cjc del 2014 è bloccato il comando farfalla egr in posizione di zero. Per ora non si accende nessuna spia. Non sono riuscito a capire la funzione di quella farfalla . Riesci a fare un video con la vecchia egr? Grazie👍🏻
Top up coolant in the expansion tank and run engine in idle for few minutes. Then take it for a drive and top up again if need it. No special procedure
@@ciprianandronescu3339 How much water should I fill? Will the expansion tank lid remain open while idling? How should I adjust the heater? I will be happy if you give me information.
Salut. Am.si eu un audi a4 b8.5 cu motor 2.0 tdi cglc. Am eroarea pe tester p0401. Am simtit doar odata in mers un intrerupt si apoi merge normal.sa fie egr infundat?
Dacă ai desfăcut răcitor la egr ai înlocuit garnitura?ai un cod pt ea te rog?vreau și eu sa il desfac sa il curat.si ce alte garnituri mai trebuie înlocuite?
@@silviugligor2395 salutare, nu am cod , racitorul am desfacut doar sa arat cauza codului de eroare si in general problema cu EGR , am inlocuit piesa cu o unitate noua OEM Valeo. Recomand piesele originale.
Din câte vad apare calamina și în unitatea cu partea electrica a egr ului...nu cred ca problema e doar ca se infunda racitorul...ci tot sistemul. Mersi de sfaturi. Eu o sa încerc sa curat tot în prima faza.
A comm down below in comm section a guy sais it had been quoted for 700£ from a garage, ridiculous. I don’t have an exact ideea how much cuse i don’t know how garage looks like i have never been in one with my car, only for mot 🤭🤭🤭🤭
But i can tell exactly how much will cost if you do it. Nothing in labour ( but your mrs will give you special treatment when she will see what a great car guy she has)😂😂😂 and 200£ for oem Valeo part. Good luck
@@ciprianandronescu3339 eram interesat dacă pot desface doar racitorul fără sa demontez și valvola.... Am întrebat pe diferite persoane și mi-au spus ca fără a demonta valvola nu se poate. Eu la tine în video dacă nu ma înșel am văzut ca au desfăcut inițial doar racitorul.... Mulțumesc de raspunsa
Am desfacut da , dar m-am chinuit. Nu recomand sa desfaci doar racitorul pt ca are o garnitura de tabla si e greu de desfacut apoi la montat e si mai greu si risti sa nu etanseze bine si o sa iti scape antigel in partea de gaze si le baga in motor in ardere si numai rau faci de acolo. . Dat jos complet si curatat. Oricum valvele o sa fie si ele blocate asa cel mai bine urmareste tot clipul si vezi acolo cum dai toata unitatea jos si gata. Daca te gandesti sa o schimbi cu totul pune doar pe original Valeo. Si trebuie calibrat EGR pe masina altfel o sa deschida flapsurile doar la valoarea de acum si gradul de incarcare de acum ca si asta veche de pe masina. Succes.
👍🏼👍🏼👍🏼 good job ! Thank you for repairing my car !
thanks a lot a lot a lot, at last I have found the real explanation of how it looks inside how works and giving tips what is important in cleaning and replacing
The. Most useful video I've seen for this issue yet
Thanks pal, appreciate
Great job and wery well explained and show how egr have to come off and more important how to put it back. Thanks for the video. Great job 👏
Thanks. Really appreciate.
Hi thank you so much, explained very well how to take the thing off.
I think it would be easier to dismount the whole assembly (valve+cooler) instead of separating the two. But I did it anyway because I wasn't certain this would be my issue.
Sadly, one of the screws going into the exhaust manifold broke, so be careful to, maybe let your engine heat up a little beforehand? Or maybe put some WD-40 on those two screws.
Last thing you didn't mention is the mileage, mine had 180k kms and looked as dirty as yours, I also had the error code (low egr pressure) so if anyone has the error code and that much kms, it's almost certain that this part is the issue
Good video, showing how EGR is attached to CJC type engine, i assume :)
Indeed CJC engine
Got timing belt aswell on my channel
Nice video. Did you lose much coolant when removing the pipes? Did the system need coolant topping up and bleeding for air, once everything was back together?
Hi thanks for watching it. The valve unit i guess it holds around half a liter of coolant or less and it will leek a bit when removing. What i did I kept all the blanks of new fuel filters and used them to blank pipes and had no leaks while waiting for the part to arrive. Topped up just a bit and then run engine till it got to 90 and then check level again. If you do it yourself home make sure you get it somewhere to calibrate the EGR valve on the car otherwise it will get blocked again quickly and say every 50k miles take it of and clean it . Keeps engine and dpf happy
Thanks for the reply. So how did you remove that bottom hard to reach bolt without the t30 long? I don’t have one of those!
@@timgoldsmith9126 i have struggled with an Allan key torx head tool. It was a pain because i had a long one only at that time. I have bought that t30 while i was waiting for the part to arrive. Go ahead and buy yourself one because it needs taking off the EGR valve from time to time and clean it so you gonna need it . Like share and subscribe. God speed.
@@ciprianandronescu3339 I have vcds, what do you need to change in order to calibrate?
@@lucasborka3714 i don’t really know with vcds, i have a icarsoft pro and Obd eleven and just clicked the calibration button and heard a clicking noise from valve and that was it .
Again, great video. I need to replace my Egr on our 2012 a4 avant as the garage quoted £700. Please tell me, what tool is needed to remove the pipes you pointed to at 10:52 with the large star like heads. Thanks again for your video.
Clarke CHT144 40-Pce TORX HEX Star Socket Spline & Bit Holder Set
And i’ve use the bit with a ratchet spanner to save space and I managed to get them loose. Make sure you use a bit of cloth to loch the bit in the ratchet spanner so you don’t lose it and it will work as a charm. There is not much room. Next video will be about how to change you hex drive key of the oil pump because it will round it off and won’t drive oil pump and you will have engine failure. Thanks for watching, please subscribe.
Thanks for your reply. Also, did you have to remove the cooler as space is so limited or can you just remove it all together?
@@jackhodge-xh5hr all unit comes off together (EGR valve and EGR cooler) . Not the actual cooler of the car that can stay on car.
I am doing my EGR right now and thanks to your help I have it off. Access is real tight ay. Just a quick one, when fitting the new valve and cooler do you fit it dry straight out of the box or do you need to fill the cooler with coolant first? Thanks again!!
@@jackhodge9824 straight back on the car and idle till it gets to 90 degree and it will bleed it self
Merhaba ! P0403 hatasi olustu Bende . Kablonun girdigi siyah kutuyu Actim. Ici gercekten su olmus Sizce sogutucuyu da temizlemem gerekiyormu? Sogutucuyu acsam temizlesem geri takarken eski kecesi ile taksam bisi olurmu? Iyi günler iyi calismalar
I can’t translate my friend. If you don’t mind saying in english. Sorry if i can not hepl you.
Ottimo lavoro!
Il collettore di aspirazione era pulito? Ciao
Si certo , solamente questo sta sporca. Io cambiato tutta unita di EGR con la radiatorre
@@ciprianandronescu3339 Hai fatto bene!
Tentare di pulire i passaggi nello scambiatore è molto rischioso . Sono molto sottili e di solito leggermente intaccati dalla corrosione galvanica .
Da ex meccanico posso tranquillamente affermare che in questi casi L’ unica soluzione è cambiare tutto.
Poi invece se uno vuole rischiare, affari suoi.
What gasket did you need for to replace?
If you buy new one it will come with the part . Two steel gaskets of the exhaust pipe. If you just clean it no need to replace
Hose need to blocked what in side hose water antifreeze ?
@@risting-pc-service5150 yes, coolant hose.
Salut prietene, dupa inlocuirea AGR a fost necesar sa activezi ceva cu VCDS ?
Salutare ,da, EGR trebuie calibrat pe masina ca sa deschida fluxul de gaze la parametrii normali . Like share si abonare , am si alte clipuri cu vag pe canalul meu.
Si cum se poate calibra?
@@vasisv4071 😂cu VCDS dai calibrare EGR si o sa auzi niste clicuri
Use Mr Muscle to clean it (oven cleaner) it melts that carbon off like butter 🤙
be careful with it.. Too strong solution can eat the aluminum
What trox nubers need to have to open this egr ?
Hi, thanks for watching. Don’t open it on the car itself. Take it completely off the car and then open it. There is a steel seal and you can’t tighten it properly . You will find then the right torx
You like to say i will demage egr if opened ?
@@risting-pc-service5150 no no, i’m saying that it’s easy to clean egr and cooler unit when it’s completely taken off the car . Then you can easy open and clean and proper tighten torx bolts to put it back toghether
What nuber 8 or 10 need to take off
Grazie al tuo video ho scoperto che nella mia b8 cjc del 2014 è bloccato il comando farfalla egr in posizione di zero.
Per ora non si accende nessuna spia.
Non sono riuscito a capire la funzione di quella farfalla .
Riesci a fare un video con la vecchia egr?
Grazie👍🏻
Grazie per la tua viziona, pero adesso non suono prossima di vecchia egr. 2settimani ti mando un video ok.
Grazie ancora!
Subscribe please
Salut. Cum pot sa te contactez? Multumesc
Salutare cauta-ma pe instagram daca vrei .Andronescu Ciprian
How do I bleed the engine water when I install a new part?
Top up coolant in the expansion tank and run engine in idle for few minutes. Then take it for a drive and top up again if need it. No special procedure
Like share and subscribe. Check my youtube for other audi clips
@@ciprianandronescu3339 Thank you
@@ciprianandronescu3339 How much water should I fill? Will the expansion tank lid remain open while idling? How should I adjust the heater? I will be happy if you give me information.
@@ciprianandronescu3339 ?
Salut. Am.si eu un audi a4 b8.5 cu motor 2.0 tdi cglc. Am eroarea pe tester p0401. Am simtit doar odata in mers un intrerupt si apoi merge normal.sa fie egr infundat?
P0401 e de la EGR doar. Trebuie curatat sau schimbat.
Aboneazate la canal si vezi clipuri cu 2.0 tdi
Dacă ai desfăcut răcitor la egr ai înlocuit garnitura?ai un cod pt ea te rog?vreau și eu sa il desfac sa il curat.si ce alte garnituri mai trebuie înlocuite?
@@silviugligor2395 salutare, nu am cod , racitorul am desfacut doar sa arat cauza codului de eroare si in general problema cu EGR , am inlocuit piesa cu o unitate noua OEM Valeo. Recomand piesele originale.
Din câte vad apare calamina și în unitatea cu partea electrica a egr ului...nu cred ca problema e doar ca se infunda racitorul...ci tot sistemul. Mersi de sfaturi. Eu o sa încerc sa curat tot în prima faza.
Any idea how much this would cost
A comm down below in comm section a guy sais it had been quoted for 700£ from a garage, ridiculous. I don’t have an exact ideea how much cuse i don’t know how garage looks like i have never been in one with my car, only for mot 🤭🤭🤭🤭
But i can tell exactly how much will cost if you do it. Nothing in labour ( but your mrs will give you special treatment when she will see what a great car guy she has)😂😂😂 and 200£ for oem Valeo part. Good luck
Quiero quiero escuchar este vídeo en castellano
Thanks for appreciation my friend, unfortunatly i don’t speak any castellano. You can watch otras mas videos con audi on my channel. Gracias
Cum ai desfăcut?
😂exact ca in video am desfacut. Grija la suruburile alea torx. Mai am si alte video cu audi pe canalul meu.
@@ciprianandronescu3339 eram interesat dacă pot desface doar racitorul fără sa demontez și valvola.... Am întrebat pe diferite persoane și mi-au spus ca fără a demonta valvola nu se poate. Eu la tine în video dacă nu ma înșel am văzut ca au desfăcut inițial doar racitorul.... Mulțumesc de raspunsa
Am desfacut da , dar m-am chinuit. Nu recomand sa desfaci doar racitorul pt ca are o garnitura de tabla si e greu de desfacut apoi la montat e si mai greu si risti sa nu etanseze bine si o sa iti scape antigel in partea de gaze si le baga in motor in ardere si numai rau faci de acolo. . Dat jos complet si curatat. Oricum valvele o sa fie si ele blocate asa cel mai bine urmareste tot clipul si vezi acolo cum dai toata unitatea jos si gata. Daca te gandesti sa o schimbi cu totul pune doar pe original Valeo. Si trebuie calibrat EGR pe masina altfel o sa deschida flapsurile doar la valoarea de acum si gradul de incarcare de acum ca si asta veche de pe masina. Succes.
@@flavianmaximilian573 like share si subscribe
Cleaner of fireplace stoves it's a only way how to clean that carbon
I’ll give it a go, in the meantime I’ve replaced with new OEM unit.
@@ciprianandronescu3339 be careful with it.. Too strong solution can eat the aluminum