How To Install Blum CLIP top BLUMOTION Soft-Close, 110 degree, Self closing, Face Frame Hinge

The best and easiest way to install concealed Blum CLIP top BLUMOTION Soft-Close Hinges, 110 degree, Self closing, Face Frame, with Mounting Plates. These are my favorite concealed soft close hinges and can be installed using the ‪@KregToolCompany‬ Concealed Hinge Jig
Chapters:
0:00 Intro to the door hinge
0:33 What you need
0:45 Setup
1:43 Drilling for hinge
2:58 Installing hinge on door
3:16 Setup for installing hinge on cabinet
4:10 Installing hinge on cabinet
--------------------- RELATED VIDEO ---------------------
📺 Easiest & Best Way To Make A Shaker Door Panel 👉🏻 • The Best Way To Make A...
📺 How To Use The Kreg Concealed Hinge Jig 👉🏻 • Video
📺 How To Make A Fake Drawer 👉🏻 • Make A FAKE Drawer Fro...
📺 How To Make A Drawer Box 👉🏻 • How To Make A Drawer B...
📺 How To Make A Shaker Bar Cabinet Part 1 👉🏻 • How To Use 1 Sheet of ...
🧰 TOOLS
• Kreg Concealed Hinge Jig | amzn.to/3NVVEac
• Drill | amzn.to/2FKP6tG
🏷️ HARDWARE
• Concealed Blum CLIP top BLUMOTION Soft-Close Hinges | amzn.to/3DIduZA
🎵 MUSIC
Epidemic Sound | share.epidemicsound.com/3n0q85
👣 FOLLOW
Qaya Shop | howyoucanmakeit.channel
Etsy Shop | www.etsy.com/shop/MillerFurni...
Website | howyoucanmakeit.com/
Subscribe - bit.ly/2FRGV11
Instagram - bit.ly/2FRK0y7
Facebook - bit.ly/2FVJLSU
Twitter - bit.ly/2FV5H0i
Pinterest - bit.ly/2FWv6a1
----------------- SOFTWARE ------------------
• Adobe Creative Cloud | amzn.to/3qAkO4H (Optional)
• SketchUp | www.sketchup.com (Optional)
📹 FILMING EQUIPMENT
• Main Camera | amzn.to/2QDh8y9
• Main Lens | amzn.to/2KOf3Kg
• Secondary Lens | amzn.to/2QdsgSY
• Audio Camera Mic | amzn.to/2SkY5pg
• Voice Over Mic | amzn.to/2rjjtjs
• Lights | amzn.to/2Eacl1e
• Laptop | amzn.to/2Q57cxL
• Editing Software | amzn.to/2QygbH9
#Woodworking #Instructions #DubbedWithAloud
‪@rockler‬ ‪@dewalttv‬
DISCLAIMERS | Some of these links have an affiliate code, if you purchase tools or gear with these links I will receive a small commission at no additional cost to you. This helps cover my build materials. Thank you!
This video has been dubbed into Spanish (United States) using an artificial voice via aloud.area120.google.com to increase accessibility. You can change the audio track language in the Settings menu.

[@MyWarCat]

There are small pilot holes on the jig to mark hinge screws as well. You can remove the the drill bit quick lock and you can make pilot holes for the hinge screws with a small drill bit.

[@HowYouCanMakeIt]

Thanks for pointing that out 👊🏻

[@maggiemcgrath5627]

This video is so helpful.
I bought the same hinges and the door doesn’t lay completely flat. Did you install some sort of stop block on the inside of the face frame to force the door the lay flat, verses closed too far into the cabinet?

[@HowYouCanMakeIt]

I attached it to the inside faceframe 3/4" lip.

[@bripsimp]

Is #5 on kreg jig the recommended setting for door boring? Thanks

[@HowYouCanMakeIt]

that is the one I mainly use however you should always check the hinge manufacture recommendations.

[@jmvediting]

for this hinge how much overlay space on your face frame did you need? My carcasses face frame have 1/2 " gap behind them

[@HowYouCanMakeIt]

I used inset doors you may need to get a different hinge for overlay.

[@jmvediting]

@@HowYouCanMakeIt I know you used inset doors . You screwed the hinge on to the face frame asking how much of a gap between your face frame and Caracass

[@HowYouCanMakeIt]

@@jmvediting oh I see it’s 1/2in

[@brickovenfarmandfare8653]

How wide would a typical faceplate for inset doors be. Looks like 1 1/4" to 1 1/2" wide stock

[@HowYouCanMakeIt]

Shaker slats are usually 2.5” wide

[@Encephalitisify]

Do they make ones that are fully adjustable up, down and in and out?

[@HowYouCanMakeIt]

Yes I believe they do. This one has a lot of adjustments

[@kayinrolland]

So the mounting bracket on the back…how do you know hot fat it goes in?

[@HowYouCanMakeIt]

You use a kreg jig door hinge drill kit link is in the description

[@liquidlizardfilms]

does the incorrect grammer on his t-shirt bother anyone else? otherwise video is great...

[@HowYouCanMakeIt]

:)