Excellent video mate, I love the honesty, by showing the trail fittments. The end result was really impressive. I didn’t realise the gt flutes had rounded edges, shows how much attention I’ve paid to them before. Looking forward to your next mod/tricks Mouse
@@phatridesgarage3760 Crwdit where credit is due Tom.🙂👍👍 And here is somethjng you don't know about me! My father got me to learn from some of the old Coach builders of Sydney. Therefor quit a compliment given😉👍👍
Hey Tom, you have a handle on everything you do, 👍 that oil can door problem, I can see the body line through the door directly above the problem needs massaging down the line is sitting up, when you do that, while holding the panel from falling in will tighten up that panel and stop the oil can. 😎 I’m a bit over 3 weeks in on fixing my hernia, was the best move ever 😎💪
I think it came up pretty good. I always liked these vents(I'm a holden guy) and have thought about putting them in my HD Ute for a while, but I never realised they were recessed into the bonnet 😂 So this has put me off a bit... or has it inspired me, we will see. On a side note, I like the channel and the variety of changing up between the cars you have to work on.
Great to see you back Tom. . Top vid, enjoyed it heaps. Hope you found your dog, hernia can be repaired and plenty more fish in the sea( if you like fishing). Keep up the good work, looking forward for the next one mate.
Thanks Joe ! haha, my girlfriend had to ask me what I meant, tried to explain I was making excuses , I do have hernias, but I dont have a dog )))) just for the record lol
I used to say to our trainee staff that there was no such thing as a failed practise run, as the failures can be applied to solve other problems sometime in the future.
top job on the scoops looks as good as factory been looking for a way to do similar pressing method in early holden floor pans to put the squares in them more like factory
Very nicely done Tom👍👍👍…fantastic vid and I love your thought process and journey to find the best way (for you) to get where you’re going 😎…even though I bet that sucked up a LOT of hours , I can tell that you obviously (though probably won’t admit it lol) enjoy the whole process …love your vids and work…cheers 🍻🍻🍻
@@phatridesgarage3760 hi mate I had put a set of xy ones into a xa bonnet for my car a while back but making some sort of press like you did the scoops with I really like by the way. should get you to do my bonnet . Give the press a go . Also keep up the great work love your Chanel mate
@@georgedamouras3454 thanks alot George 👍 if I can help others a little later with the press I will, just want to make sure it all turns out good first .
haha, let me be sure how this one turns out mate , if its good then I dont mind doing some more for others. Next is to remove the skin, fix the frame for rust , reskin and body work the bonnet
Great video again Tom but you do what you feel is right and pay no attention to the comments. The worse comment i hate the most is 'Gee that should only take you 15 minutes to do ' my response was always Fuck off idiot then you do it. Great to see you back and remember take your time. Cheers.
Not sure. Could sell it, but not sure I would get back what I put into it in parts etc, sitting until I get the spray booth organised at least, and cant do that until we finalise the new Lease on this building over the next few weeks
Hey Tom, don't be hard on yourself, the way to learn stuff is by getting in and having a go, from this side of the camera you are doing a great job
Thanks very Much Michael !
I recon the scoops come up good 👍
I like the way you tried various techniques to get it right and the end result was well worth it. You did a really good job and you should be proud
Thanks mate I appreciate that!
Excellent video mate,
I love the honesty, by showing the trail fittments. The end result was really impressive.
I didn’t realise the gt flutes had rounded edges, shows how much attention I’ve paid to them before. Looking forward to your next mod/tricks
Mouse
Thanks mate, great to hear you enjoyed it!
Thanks for sharing this mate. It's a job that I'll tackle on my XA coupe when the time comes. Cheers!!
Thanks for watching mate
Love the videos, always learn a lot from watching your work.
Thanks mate 👍
G'day from West Australia, Tom😉
Well done, 43yrs I have taken my hat off to those that give it a go and make something work.
Job done Tom🙂👍👍
Cheers Steve! thanks alot mate
@@phatridesgarage3760 Crwdit where credit is due Tom.🙂👍👍
And here is somethjng you don't know about me!
My father got me to learn from some of the old Coach builders of Sydney.
Therefor quit a compliment given😉👍👍
Nice job on making the template's they look original they turned out great thumbs up 👍👍👍
Thanks alot mate 👍
I’m so sick of the LG HD TV crap…… great job Tom!!
Haha you and me Both , Cheers Trevor !
Again OUTSTANDING Work
Thanks mate 👍
Hey Tom, you have a handle on everything you do, 👍 that oil can door problem, I can see the body line through the door directly above the problem needs massaging down the line is sitting up, when you do that, while holding the panel from falling in will tighten up that panel and stop the oil can. 😎 I’m a bit over 3 weeks in on fixing my hernia, was the best move ever 😎💪
Hi Kim, Thanks mate appreciate the advice and I will try that solution!
Gday Tom,always cool watching how you go about things
Thats great Rob thanks for watching mate
Great job, Tom looks great. Cheers have a good one🍻👍
Thanks alot Graham !
I’m impressed that was made to look easy
Looks the goods
Thanks mate
wow. That looks great. Nice problem solving 👍
Thanks mate !
I think it came up pretty good. I always liked these vents(I'm a holden guy) and have thought about putting them in my HD Ute for a while, but I never realised they were recessed into the bonnet 😂 So this has put me off a bit... or has it inspired me, we will see.
On a side note, I like the channel and the variety of changing up between the cars you have to work on.
Thanks for watching mate , glad your enjoying the videos, dont let it put you off !
Top shelf work as usual Tom give yourself more credit those fords are looking great another great video take care mate
Thanks alot Russell!
they came up real nice great way to do them without distortion you'll be getting orders to do gt bonnets now 😁
Thanks Jeremy!
Top job Tom. 🤙
Thanks Robert 👍
Great to see you back Tom. . Top vid, enjoyed it heaps. Hope you found your dog, hernia can be repaired and plenty more fish in the sea( if you like fishing). Keep up the good work, looking forward for the next one mate.
Thanks Joe ! haha, my girlfriend had to ask me what I meant, tried to explain I was making excuses , I do have hernias, but I dont have a dog )))) just for the record lol
Delicious work! Your living my dream! Xa and and a fairlady!❤
Thank you so much Deane !
@@phatridesgarage3760 great work on the scoops! I would never have thought to do that! Take care!
Really enjoyed watching the show. Don't be hard on yourself because it was never perfect from the factory
Thanks mate !
was wondering what you were up to tom, i realise making videos sucks up a lot of time, but i appreciate you doing it as we can all learn, keep it up
Thanks mate !
I used to say to our trainee staff that there was no such thing as a failed practise run, as the failures can be applied to solve other problems sometime in the future.
Well said !
top job on the scoops looks as good as factory
been looking for a way to do similar pressing method in early holden floor pans to put the squares in them more like factory
Thanks mate, hope it helps
Very nicely done Tom👍👍👍…fantastic vid and I love your thought process and journey to find the best way (for you) to get where you’re going 😎…even though I bet that sucked up a LOT of hours , I can tell that you obviously (though probably won’t admit it lol) enjoy the whole process …love your vids and work…cheers 🍻🍻🍻
Thanks Tex! yeah, I do like the journey of discovery ))
Looks great Tom. Looking forward as always to your videos.
Awesome, thank you Matt!
Nice job mate good work
Thanks Jimmy 👍
Impressive Tom !!…gr8 work & top video for the rest of us 👏👏
Glad you enjoyed it Wayne, thanks and I appreciate the feedback !
Fantastic work 👏
Brilliant!!!
Thankyou Sam!
I reckon they looked good from here 🙂.
Cheers Wes !
Yay new content phew - Love the excuses anyhow.
cheers mate !
It's called a air stepping tool !
Ahh ok cool thanks !
Looks like someone put an XK falcon chrome bird hood ornament on that old bonnet.
Ahh , ok thats what it is !! cheers mate
I'm err IMPRESSED Haha
Haha, cheers mate !
How about the bonnet pins tom.
Not sure, thinking about it )
Hi mate are you putting the lock pins in as well
I thinking about it, wondering if I can devise a way to press the circle in
@@phatridesgarage3760 hi mate I had put a set of xy ones into a xa bonnet for my car a while back but making some sort of press like you did the scoops with I really like by
the way. should get you to do my bonnet . Give the press a go . Also keep up the great work love your Chanel mate
@@georgedamouras3454 thanks alot George 👍 if I can help others a little later with the press I will, just want to make sure it all turns out good first .
@@phatridesgarage3760 hi mate you're more than welcome
🍺👍🏻😀
Hey Tom when can i drop off my xa bonnet ?
haha, let me be sure how this one turns out mate , if its good then I dont mind doing some more for others. Next is to remove the skin, fix the frame for rust , reskin and body work the bonnet
@@phatridesgarage3760 sounds good to me looks great , im in ,
I'm interested too.
Non binary 🤣🤣
Looks great!!
Thanks mate !
Great video again Tom but you do what you feel is right and pay no attention to the comments. The worse comment i hate the most is 'Gee that should only take you 15 minutes to do ' my response was always Fuck off idiot then you do it. Great to see you back and remember take your time. Cheers.
Thanks Les, good to read your comment and thanks alot for the support !
What are you guys doing with the 300zx?
Not sure. Could sell it, but not sure I would get back what I put into it in parts etc, sitting until I get the spray booth organised at least, and cant do that until we finalise the new Lease on this building over the next few weeks