Testdrive and tuning. Evinrude 300, 2-stroke V8 with expansion chambers. Custom made front and rear end. Modified Powerglide SFI Spec 25.4B Tube Chassis Volvo 122 Amazon body Alot of tuning left to do....=)
We need more of this. Us two stroke fanatics have been subscribed to this channel for years in hopes of seeing this project come along. Absolutely wonderful!! I'm 37 years old and when I was about 20 I always said that I wanted to use an Evinrude 2T powerhead and set it in a small car and then years later I found your motor videos. Good job my friend I look forward to seeing more.
I just found this video and I already cannot wait for an update, this is so cool. I can’t even imagine the horrors of having already waited for 4 years. You're a brave man!
Over 550 lbs of torque with out a turbo, just make it a DFI with exhaust trapping valve and slight boost and it would put out over 800 ft-lbs of torque. This thing make more power and torque than poppet valved big block conversions and my 8v92 2 stroke detroit diesel. this Evinrude small block was the best american small block ever made, nothing else compares and wont hold up
@@isaacsrandomvideos667 yes, kinda sad because i want a 2 stroke v8 miata, now I’m looking at empty forums on how to adapt an outboard engine into a car
Sir.Lithium ouch. Kinda reminded me of this guy who put like a 2HP boat engine in a civic lol. If you get that to work though it would be damn cool though.
Wow! I had a dream last night of building a 1/2 scale 1979 Malibu wagon and using an outboard v8 for the motor, trying to keep it scale. It was done in a pro touring style with a 5 or 6 speed transmission. This car is awesome, I am glad you followed through with it.
Do it, except use a T-6070 from a C7, maybe the IFS too...they sell cheap because they aren't able to be readily used bolted to the back of an engine. Your welcome. 7 speeds would be useful keeping that 2 stroke up to steam.
I know I'm late to the party but I've been seeing your videos since I was in high school I've been wanting to see this engine in a car for such a long time man you should bring it to the Sema autoshow
I know the sound of an Evinrude XP300 when I hear it. I had one of these beasts. Amazing torque. 4.0 litre 8 cylinder 300 hp stock easy to get 375 hp and 400 ft pounds out of it. Look up the XP300 dyno on here. Very cool.
expansions on 2 stroke are the best way to increase power, normally on outboards there is no place to put it so they are really underpowered. A fine tuned 2 stroke can make 200 cv/litre, the last 2stroke racing motorbikes 500cc was on 180/200 cv. I think this monster of 4 liters with expansion could easily reach 500/600 cv and much more
I've been wanting to see this for a long time, congrats on getting it going. I would love to have one of these in my Locost, but for now I'm stuck with an ordinary car engine.
As far as I can work it out they did put a fiberglass front end, windows,head and taillights and a drag racing"spoiler" on it. The engine is an Evinrude unit with originally 3.6 liters they enlarged it to 4.0 and raised the power output to over 400hp.the car has an automatic transmission and it weights just under 690kg Could be wrong tho their Facebook page is entirely in swedish and neither I with my poor knowledge of swedish nor the translator are always correct.
That's a very good effort for a V8 engine,building one that's 2 stroke. I picked up an old Victa 2 stroke lawn mower last night & I was wondering if there's any way to get them to match the exhaust emissions of a 4 stroke engine (i.e. no smoke). I have seen an Evinrude 2 stroke outboard motor on here in a boat getting run with a fuel to oil mixture of 100:1 which means that it doesn't blow any smoke. That's a 1979 model engine & they typically run a 50:1 fuel to oil mixture. The mower is an old powertorque engine & it sounds like it needs new crankshaft bearings as they sound rough & pitted. While it's apart, it makes sense to fit new piston rings because I can get the parts & fix that one up for $40 AUD if it's just the motor & not the carb,etc that needs a service. The base needs repairing,nothing that a patch of sheet metal,clean up,prime & a coat of paint won't fix.
I've been a huge fan the minute I saw this thing run. But I wish it was a little more of a walk around to check out the body it was put in. I would make some type of collector for the exhaust if possible but that would mess up the tuning. Great piece though.
yeah man whats up with this thing? if your not gonna show us and it some love. let one of us have some fun with it. i promise id finish the thing. my last project took less than a month start to finish. and working full time.
I would imagine that even a 4 litre 2-stroke is relatively light. The original Volvo engine weighed about 340 lbs.and gave 100 bhp stock. If the V8 is @ 400 lbs. and puts out 250 bhp it should be a very quick car.
The stock engine before any tuning was 275-300hp (evinrude 300) I'd presume with the custom expansion chambers and fuel injection this engine puts out at least 400hp
This sound like nothing else on the street. I guarantee if you would make better videos and show more details people would literally just give you money. I don't understand why you are screwing around with one minute cell phone videos. if you went into detail you'd have an easy 500,000 viewer count.
@@morthskarampouzouklis8561 Yeah it's a concept a lot of idiots on the Internet don't get. When you have a real job and a real life, you don't need to nickel and dime videos for "views and subs". Just share what you built or what you did, spend 10 mins at the computer uploading it, go back to your day, and that's all.
Waited 2 years for this.
damn so true
totally worth it though.
same here lol
saaame
same
We need more of this. Us two stroke fanatics have been subscribed to this channel for years in hopes of seeing this project come along. Absolutely wonderful!! I'm 37 years old and when I was about 20 I always said that I wanted to use an Evinrude 2T powerhead and set it in a small car and then years later I found your motor videos. Good job my friend I look forward to seeing more.
Yeah. I would love to see videos talking about every detail of the project.
I just found this video and I already cannot wait for an update, this is so cool. I can’t even imagine the horrors of having already waited for 4 years. You're a brave man!
Check out @hartwickperformance. He’s working one of these engines into a Datsun wagon.
GM made 2 stroke v8's
Sounds like a cross between a rotary, a cr500 and a Yamaha banshee
Quincy O'Connor sort of. to me it sounds like a Porsche boxer 8 with a crossplane crank.
Rotary and 2 stroke sounds identical to me...
Quincy O'Connor sounds like a 2 stroke snowmobile
sounds like a CR500 and a yamaha banchee having angry sex in a well... I approve!
Over 550 lbs of torque with out a turbo, just make it a DFI with exhaust trapping valve and slight boost and it would put out over 800 ft-lbs of torque. This thing make more power and torque than poppet valved big block conversions and my 8v92 2 stroke detroit diesel. this Evinrude small block was the best american small block ever made, nothing else compares and wont hold up
This guy has one of the sweetest rides I know of and yet he will hardly ever privilege us with videos of it.
THE BRAAAPPENING
That motor would be badass in an off-road truck, something to play in the sand!!! Such an awesome build! Much respect!
It would
2021 no ones ever made a 2 stroke car other than this guy
Wrong.there has been plenty of them... early saab 96s were 2 stroke...warburg Knight had a car that was a 3 cylinder 2 stroke...
smokes like a diesel smells lika a moped
Smell like a two stroke- simple
and to stroke smells beautiful
Smokes like a 2 stroke, smells like a 2 stroke
mathias barnby 2 strokes smokes too :D
And runs like a scalded dog!
Soubds like a swarm of pissed off hornets, or in other words badass.
Sounds and looks thrilling. I want to drive that so badly!
What happened to this project? It’s so cool. I need more
They sold it
@@sir.lithium81 really? Sad. I guess it leaves more room for the next project though.
@@isaacsrandomvideos667 yes, kinda sad because i want a 2 stroke v8 miata, now I’m looking at empty forums on how to adapt an outboard engine into a car
Sir.Lithium ouch. Kinda reminded me of this guy who put like a 2HP boat engine in a civic lol. If you get that to work though it would be damn cool though.
@@sir.lithium81 🤣
Wow! I had a dream last night of building a 1/2 scale 1979 Malibu wagon and using an outboard v8 for the motor, trying to keep it scale. It was done in a pro touring style with a 5 or 6 speed transmission. This car is awesome, I am glad you followed through with it.
Do it, except use a T-6070 from a C7, maybe the IFS too...they sell cheap because they aren't able to be readily used bolted to the back of an engine. Your welcome. 7 speeds would be useful keeping that 2 stroke up to steam.
To the man who created this, I hope you and your family prosper 👌👌👌
I too have been waiting a long time, excited to see your completed project!
*NICE!!!!!*
_Long Wait for the video , But We Got to see her going!!!_
I have a 3.8GT Johnson V8. I've been thinking about cleaning it up and selling it for $300. This is a cool video!
Now this is the awesome side of Evinrude!!!
Sounds like a V16 made from several Honda 2 strokes
Yeah! I been eagerly waiting for the outcome but this is way beyond my expectations!
Man this thing sounds tough as hell! Haha still has that slight V8 note for being 2 stroke.
I know I'm late to the party but I've been seeing your videos since I was in high school I've been wanting to see this engine in a car for such a long time man you should bring it to the Sema autoshow
Looks a nice quiet Sunday morning too, lol I can picture all the old ladies spilling their tea and calling the police at the same time
I know the sound of an Evinrude XP300 when I hear it. I had one of these beasts. Amazing torque.
4.0 litre 8 cylinder 300 hp stock
easy to get 375 hp and 400 ft pounds out of it.
Look up the XP300 dyno on here.
Very cool.
expansions on 2 stroke are the best way to increase power, normally on outboards there is no place to put it so they are really underpowered. A fine tuned 2 stroke can make 200 cv/litre, the last 2stroke racing motorbikes 500cc was on 180/200 cv.
I think this monster of 4 liters with expansion could easily reach 500/600 cv and much more
Thanks for letting me know what it actually is
Wtf is cv
The power band has to be insane.
2 stroke smoke mix with burnout smoke 😂😂😂. Even thought u're not making a burnout, nobody can tell the different 😂
The most beautiful car & sound ever. ;)
i love how lightweight it must be!!! i'm dreaming about a mid engine prototype with that like White Snow dreams of her prince
i love this thing, nice to see it driving! sounds great!
that is the coolest fuckint thig ive ever seen
joe johnson true dat
This is the coolest thing I've ever seen.
That sounds nice! Makes me want to find a 2-stroke V8 to play with.
I've been wanting to see this for a long time, congrats on getting it going. I would love to have one of these in my Locost, but for now I'm stuck with an ordinary car engine.
Imagine standing in line between the mopeds at the gasstation. 😎. . . 😁
this is the most badass car I've ever seen. I'm waiting for more, bro
Listen. Ima need a video of this thing hitting powerband, that’s gotta be wicked
Bland det häftigaste som har byggts!!!!!
Cool factor is going nuclear!
I can't handle it!
This is you Fred. from motorbikes two-cycle expert 👍 I have a racing head from you 👍
Frederic Chelminski this is you friend the expert from motorbikes two-cycle engines I have a racing head from you on my motor bike 2 cycle engine
Amazing.. I didn’t think 2 Stroke V8s existed, but this gives me hope for the world of ridiculous engines
It's an outboard boat engine, I think Evenrude and Johnson made some V8 2 strokes, under the company OMC
I love the sound it makes when you miss gears...
Looks like the Plymouth Superbird racing muffler in Gran Turismo 2. But this is so much better❤❤❤❤
Did this thing ever get completed just wondering cause this video is from 3 years ago. Just want to see it cause its awesome.
As far as I can work it out they did put a fiberglass front end, windows,head and taillights and a drag racing"spoiler" on it. The engine is an Evinrude unit with originally 3.6 liters they enlarged it to 4.0 and raised the power output to over 400hp.the car has an automatic transmission and it weights just under 690kg Could be wrong tho their Facebook page is entirely in swedish and neither I with my poor knowledge of swedish nor the translator are always correct.
@@tobiasdierks either way it sounded good. Thanks
That sound from that V block an the 2stroke, crazy 😅
Sounds amazing. Love it. Got any numbers yet?
Weeell, 2 stroke V8 300hp Evinrude outboard motor will do fine to smoke the place up. 👌👌👌👌👌👌👌
The shifting sounds insane
That looks like heaven on wheels :-)
Smells like a two stroke spirit
sings like angels
we need more. this is amazing
I think the guy who built this must have happy memories of a Saab 96 2 stroke. 😊
What a disgusting and obnoxious contraption!! But since it hasn't destroyed the planet yet after 6 years....I LOVE IT!!!
I'd like this car, thank you, I'm from Russia
This is beautiful... I need more.
Did this ever get finished? We want moar video!!
YESSSS SO EXCITED TO SEE THIS BADASS MACHINE!!!!
I thin I speak for many when I say we need more videos of this car
Yaaaaass it’s back!
Holy shit. I've waited so long for this video.
We deserve an update, dude. This is an AWESOME build and I want to know what happened to it
That thing sound totally obnoxious and I love it !
thats a mean lawnmower you got there fam
Great to see it driving
The perfect sleeper car
Who need lambo if you have this monsta?
So awesome, its can make supercar starts sweating of nervous😂
That things a beast. What a great job
Rudezon = lot of power & smoke
2 stroke? that's amazing!
This is an amazing build
IT LIVES!!!!!
High 5 to ya! That is cool.
Imagine that on a sled or bike?
Mate you have done an awesome job , please do a follow up video if possible, I hope all is well. Cheers from Australia 🇦🇺
Imagine that torque
waited so lang for this
Imagine this revving in town center at midnight
2 stroke V8????? Mother of horsepower!! :000
show us more!!!! such an amazing build
That's a very good effort for a V8 engine,building one that's 2 stroke.
I picked up an old Victa 2 stroke lawn mower last night & I was wondering if there's any way to get them to match the exhaust emissions of a 4 stroke engine (i.e. no smoke).
I have seen an Evinrude 2 stroke outboard motor on here in a boat getting run with a fuel to oil mixture of 100:1 which means that it doesn't blow any smoke.
That's a 1979 model engine & they typically run a 50:1 fuel to oil mixture.
The mower is an old powertorque engine & it sounds like it needs new crankshaft bearings as they sound rough & pitted.
While it's apart, it makes sense to fit new piston rings because I can get the parts & fix that one up for $40 AUD if it's just the motor & not the carb,etc that needs a service.
The base needs repairing,nothing that a patch of sheet metal,clean up,prime & a coat of paint won't fix.
Low emission 2 stroke is called an optimax or an E-TEC
compliment from italy
I've been a huge fan the minute I saw this thing run. But I wish it was a little more of a walk around to check out the body it was put in. I would make some type of collector for the exhaust if possible but that would mess up the tuning. Great piece though.
yeah man whats up with this thing? if your not gonna show us and it some love. let one of us have some fun with it. i promise id finish the thing. my last project took less than a month start to finish. and working full time.
I would imagine that even a 4 litre 2-stroke is relatively light. The original Volvo engine weighed about 340 lbs.and gave 100 bhp stock. If the V8 is @ 400 lbs. and puts out 250 bhp it should be a very quick car.
The stock engine before any tuning was 275-300hp (evinrude 300) I'd presume with the custom expansion chambers and fuel injection this engine puts out at least 400hp
Still checking up after 5 years
And I STILL want one!!!!!!
I have a crazy idea. Do Hot Rod Drag Week with this thing!
This sound like nothing else on the street. I guarantee if you would make better videos and show more details people would literally just give you money. I don't understand why you are screwing around with one minute cell phone videos. if you went into detail you'd have an easy 500,000 viewer count.
His first video has like 11 million views. Haha
Yeah. I would love to see videos talking about every detail of the project.
100% agree
Maybe he doesnt give a shit about all this and he just enjoys building and riding the damn thing
@@morthskarampouzouklis8561 Yeah it's a concept a lot of idiots on the Internet don't get. When you have a real job and a real life, you don't need to nickel and dime videos for "views and subs". Just share what you built or what you did, spend 10 mins at the computer uploading it, go back to your day, and that's all.
sir I will order you those 8 turbos you were thinking about XD
I wanna drive this thing in front of the California Air Resource Board headquarters
Wish there was more videos of this.
Sounds like an RC V8. Cause it technically Is.
holy shit, thats fucking amazing, dat sound
U mean fucking Amazon ? =)
Crazy stuff 👍
That's fucking awesome!
we need more!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Fuck that must be loud, where has this project gone??
Animal of a car 💯
Isn't this the same place 1320 video got a ride in a V8 volvo in Stockholm open?
I hope you still have the car. Waiting to see it tipping the track
MAD MACHINE
I just found this beauty how is it going? Nothing new in the Last 4 years?
What is happened with this piece of art today?
Duuuuuuuuude. More videos please holy shit nice fucking job !!!!