Great video, Sahaj. When one strays from the "chosen path" and tries to get a good deal on a display (or a different form factor than e.g. the official RPi-display), all kinds of problems can arise. Good info from your part on this topic. Looking forward to your next update.
I agree, it's a bit of a mess. That board in the nano pc display is for power and touch. The custom pinout is so they can send 5v for the display and get back the touch info. The displays need a special voltage supplies which the breakout boards create. Good video. :)
Very fascinating overview.Although one thing I'm wondering is whether or not there is an lcd interface for driving a 50pin via SPI. I had recently gotten an adafruit a 40pin 5" tft display, with a 40pin spi driver. I control it via an esp32. It's great and all but I really wanted to go with a 7" instead. Problem is that adafruit is out of stock. I do have a 7" 50 pin lcd who's hdmi driver board died by overvoltage a while back and now i wonder if I can find an spi driver for it.
Hey Sahaj, great video. Do you know if there is any controller that does the opposite of the two controllers you show in this video? So a controller that would convert from 50 pin input to HDMI output.
Hi, how you can choose the right lcd screen for a board? I bought a 19 usd lcd 7 inch with 50 pin to replace one from a 7 inch monitor and it I the new screen it seems to be in a different resolution but there is no way in the OSD to re-adjust the new screen to fit the right resolution. I think I just did a bad purchase choice (im dont have electronic repair backgroud or similar) it just for a retropie project
Very good information indeed. Just what I need. Please add review about the touch controller. They are touch panel actually but you miss the touch part. How to interface the touch controller to SBC?
Great video thanks...I have a wee question for you...I have a 3.5 inch 40 pin lcd...would there be a bigger screen I could use with the same controller without losing resolution etc?
I have a broken tablet lcd N080JCE (8 inch -1920x1200) lcd. I tried getting by a board from AliExpress and it couldn’t drive it properly. I only see horizontal and vertical lines and colors, dont see any images or alphabets, just lines. What does that mean? Is the controller incompatible or the lcd is faulty? Its a 39-pin MIPI , 4 data lanes IPS lcd. I really want to get this lcd working because its a very high quality and good viewing angle lcd panel that i dont want to throw away. What do you suggest?
if i have a 4.3" touch screen that just stays lit on white is there a way i can just buy the front of the touch screen with the 40 pin cable and not have to purchase the circuit board that is behind the lcd panels you are holding? where can i buy those panels just by them selves ? thanks
Hey, Would u know which lcd driver board in AliExpress would help me drive my N080JCE-G41 Rev A0 tablet LCD? This LCD seems to have 39-pin FPC and I am not sure if the 40-pin Adafruit is capable of driving it? Any recommendations would help revive my broken tablet’s LCD Panel.
hello, would you know if it is possible to convert from 40 to 50 pins? I have a yamaha music keyboard model sx600 that uses the small 40-pin display, and I would like to use some converter to use a 7-inch 50-pin display, is there any way to adapt this? thanks
This is my first project. Any advice? I want to use a round LCD 49 pin 1.8v display. I'm not sure which pi I would need to make a video player/looper. I'd like to have bluetooth casting available if you have any info or resources as well. Thanks in advance!
Nice learning video. Thanks. I do have a question, if you can please clarify - does a 50 pin controller support 17 inch display. If i may ask more precisely, i'm looking for a controller board for Samsung 17 inch LCD panel (part#F199R). Please help me with your expert guidance, if you can.
Hi I have a tft lcd display 10.1 inch and the lvds cable ribbon broke I mean its still in the lcd but it broke the part that goes in the controller board is there anyway to fix that and if so where can I get a replacement lvds cable
50p controllers can use 40pin raw TTL screens, by ignoring the avdd/vcom/vgh/vgh pins, as the screens have that internally. I found two "50p-rgb" screen to 40pin TTL FPC adapter boards on alliexpress. one had 4 pins to use external booster module. another had the boost converter onboard of course requires 5v supply. so its not possible to passive convert 50pin display to work on 40pin controller (lvds or TTL)
hello, would you know if it is possible to convert from 40 to 50 pins? I have a yamaha music keyboard model sx600 that uses the small 40-pin display, and I would like to use some converter to use a 7-inch 50-pin display, is there any way to adapt this? thanks
please , answer me . I have a 13.3 inches lcd monitor 40 pins , pulled out from a dead android tablet . do you think these video controler boards could work with my 13.3 inches lc monitor ? it's not a laptop monitor despite its size , it is a common 13.3 inches monitor used in current 13.3 inches android tablet
I need information on a project I'm working on. Here's what I'm trying to do. I have a working LG lm x210 without a screen. Ideally, I'd like to attach a screen I have from a Vantron 5081g tablet. It has a 31 pin LCD ribbon connector. I realize not all of the pins are used, I need to know which pins are used & where they go. If that isn't possible, I have 3 other screens, the Samsung sm J100, the Samsung sm J120 & a Motorola xt 1921-8. It's a project specifically trying to see if this can be done. I can't go buy any parts or phones or anything like that, I have to use the parts I have. Any help will be greatly appreciated.
I have a 12pin Oled from a mobile phone. It's color 1.5inch Oled. How can I get a controller for it? Is there any standard for the pins on flex cable to understand. I am a embedded systems guys. Still trying to make career. Please give me insight on that Oled 12pin
hey man out of stock 40 pin lcd controller board. so i ordered (50 pin TTL only) VGA hdmi LVDS LCD Controller Driver Board online in china. i have here my old tablet has 40 pin 7 inch lcd to 50 pin TTL ?. my question it will work or not? pls help me sir thak you and more power.
I wish you could provide a little bit more low level technical info about these displays and connectors and pinouts other than which matches which board. I am not sure but my guess is the 40 pin is the LVDS interface that is designed to work with Adafruit type of boards that have a realtek RTD266x flat panel controller that converts HDMI to LVDS. And the 50 pin versions could be the TTL (RGB+SYNC). Or perhaps 40 pin can be both and they accept a single VDD and 50 pin require charge pump VGH/VGL/AVDD/VCOM.
correct, 40pin can be lvds protocol or raw RGB TTL, with built in boost circuit (vgl,vgh,avdd,vcom). 50 pin is raw TTL, but requires external boost circuit. so do you want cheap driver (adafruit style) or cheap screen (50pin). the boost circuit on 40pin TTL is located on flex cable in some cases
Man can i connect a diffrent tipe of display on my broken Tab, It has an amoled display can i wont to connect an LCD FPS more cheeper, ore to connect to an television monitor some how, i can't use the mirroring or the HDMI adapter because It have to activate debug USB end i don't have the possibility untile i don't see anythink
Hi Hope you are well. I have a 7-inch tft display (no touch) when I trying to connect this via HDMI cable in my raspberry pi zero w the display goes black I trying to solve this from internet but I can't. Can you help me to solve this problem ?
I am trying to refurbish the touch screen from an Android car radio, it has separate two wires plug for backlight and like a 50 pin or so flat cable. It's a 7" Nice display and I'd like to use iit. The car radio amplifier went out, but the display works, so I pulled it out.
Hey Man! I have a project to buy LCD screens of 15" that can be used by children as a 24/7 school module in villages far away. I want to cost less than $200, use solar power, 12 nice lithium cells, a super tough glass on top of the LCD, and a standard laptop touchpad with cellotape and 3 wires in case we should change the touchpad. The idea is that 3-5 kids can learn from thousands of books for about 10 years until the system breaks. everything is fixed in cheap steel frame and metal-cement housing so it stays in one place. what do you think?
I want to buy a 7 inch touch display for my raspberry and laptop as a external display Plz suggest my a display which not so expensive but resolution and
sir, you are great. i am looking many LCDs with drivers on the table, may you wish me one of so little screen with driver for my diy projector? i will very thankful at your greatness. thanks.
Dear amigo.. great video explaing your two boards. I am currently working on an LCD display that is part of a Smart Rear View Mirror from Junsun. The board is an Android device with 2 ports for the display. One is a 40 pin and the second of 30 pins which I found it is for the screen digitizer or touch screen capabilities. This device stoped working about 4 months after I bought it and Android keeps booting in cycles stating: Optimizing Application 1 of 1.. it reboots and it goes through the same in an infinite loop. There are no ports for me to connect anything like a keyboard or usb cable for debugging the board. So my intention was to replace the board with a Raspberry Pi 4 or Raspberry Pi Zero 2 W but I cant find a controller that can combine both the connector to the digitizer and the LCD cable and output to a single either hdmi with touch screen or USB type C with touch controls. Do you have any advice based on your experience? the display model is the WTL068601G02-18M and the digitizer part number is WJ-DR68670-v3 FPC.
Hi Sir, I have Balupunkt key largo 970, 10.1 inch car android stereo, in which the screen resolution is very low like 1024 X 600 px which is not satisfied quality of custom android experience. is there any other way I can introduced or connect any Samsung Tab screen 10 inch screen to Balupunkt key largo 970, 10.1 and get FHD resolution?
I need help for my samsung galaxy note 10.1 (n8000) the motherboard has issue and i plan to use a controller board for the screen but i dont know what pin connector to use i count it showed me 45 pins
Hi, Very very INTERSTING video! Thanks for your valuable experience sharing. Since I'm a TV repair man, following your example, I would like to build a homemade" device using one of the displays you show and I already have, which has the 50 pins interface. I would like to connect it to a generic TV mainboard which usually use an LVDS inteface, just to check & see if the mainboard is working & correctly sending the TV signal to the T-CON board inside the TV. Could you help me a bit to elaborate what kind of interface I could use? Thanks alot for you kindness.
Hello Sahaj, Do you think its possible to adapt from a 41pin LVDS edp1.4 driver to a 51 pin screen, and still drive it? 4k driver to 4k oled pannel, I'm trying to create something along these lines. As well, Is it possible that these edp1.4 pinouts (41, 51) are universal or do each manufacturer assign different pins? Thanks!
I am having 7" waveshare LCD(B) touch display.Back light working.But no picture.I think driver controller board damaged.I have emailed to the Waveshare company. But no reply from the company.In our country (India) Authorised resellers are telling me to purchase complete set. Where can I get the 7" driver controller board ( with touch) for the above display.
hi I need help I bought the wrong LCD controller board it has 50 pin and I have a 40 pin is there any way to still connect it with the LCD controller board
I also bought the wrong controls button it has 8 pin and where the controls button plugs in is 10 pin is there any way to still connect and make it work thnx
what is the trick to connecting the ribbon connector to this board at czcams.com/video/m_TIvYgdC84/video.htmlsi=58FhcLxEOxiFroon&t=522 Mine is very similar to yours and doesn't have the pull crimp bar like most I've seen.
LTN156AT35 LVDS 40-Pin 1366*768 15.6" HDMI+VGA+2AV controller drive board ------------> I need this ,please send me the link to buy it ... need delivery to india
Great video, Sahaj. When one strays from the "chosen path" and tries to get a good deal on a display (or a different form factor than e.g. the official RPi-display), all kinds of problems can arise. Good info from your part on this topic. Looking forward to your next update.
I agree, it's a bit of a mess. That board in the nano pc display is for power and touch. The custom pinout is so they can send 5v for the display and get back the touch info. The displays need a special voltage supplies which the breakout boards create. Good video. :)
Thank you very much for this video! 👍 It helped me now a little on how to check and repair or replace the display of my car radio :)
Can you a link of that display driver
Very fascinating overview.Although one thing I'm wondering is whether or not there is an lcd interface for driving a 50pin via SPI. I had recently gotten an adafruit a 40pin 5" tft display, with a 40pin spi driver. I control it via an esp32. It's great and all but I really wanted to go with a 7" instead. Problem is that adafruit is out of stock. I do have a 7" 50 pin lcd who's hdmi driver board died by overvoltage a while back and now i wonder if I can find an spi driver for it.
Hey Sahaj, great video. Do you know if there is any controller that does the opposite of the two controllers you show in this video? So a controller that would convert from 50 pin input to HDMI output.
Great video, very helpful
Your desk looks like mine at the moment. :D
Hi, how you can choose the right lcd screen for a board? I bought a 19 usd lcd 7 inch with 50 pin to replace one from a 7 inch monitor and it I the new screen it seems to be in a different resolution but there is no way in the OSD to re-adjust the new screen to fit the right resolution. I think I just did a bad purchase choice (im dont have electronic repair backgroud or similar) it just for a retropie project
Thank you for sharing this video, it is very informative & I had learned a lot.
Very good information indeed. Just what I need. Please add review about the touch controller. They are touch panel actually but you miss the touch part. How to interface the touch controller to SBC?
Thank you!!!! You beautiful human being
Great video thanks...I have a wee question for you...I have a 3.5 inch 40 pin lcd...would there be a bigger screen I could use with the same controller without losing resolution etc?
I have a broken tablet lcd N080JCE (8 inch -1920x1200) lcd. I tried getting by a board from AliExpress and it couldn’t drive it properly. I only see horizontal and vertical lines and colors, dont see any images or alphabets, just lines. What does that mean? Is the controller incompatible or the lcd is faulty? Its a 39-pin MIPI , 4 data lanes IPS lcd. I really want to get this lcd working because its a very high quality and good viewing angle lcd panel that i dont want to throw away. What do you suggest?
if i have a 4.3" touch screen that just stays lit on white is there a way i can just buy the front of the touch screen with the 40 pin cable and not have to purchase the circuit board that is behind the lcd panels you are holding? where can i buy those panels just by them selves ? thanks
Hey, Would u know which lcd driver board in AliExpress would help me drive my N080JCE-G41 Rev A0 tablet LCD? This LCD seems to have 39-pin FPC and I am not sure if the 40-pin Adafruit is capable of driving it? Any recommendations would help revive my broken tablet’s LCD Panel.
Really helpful....thank you!
hello, would you know if it is possible to convert from 40 to 50 pins? I have a yamaha music keyboard model sx600 that uses the small 40-pin display, and I would like to use some converter to use a 7-inch 50-pin display, is there any way to adapt this? thanks
This is my first project. Any advice?
I want to use a round LCD 49 pin 1.8v display. I'm not sure which pi I would need to make a video player/looper. I'd like to have bluetooth casting available if you have any info or resources as well. Thanks in advance!
Nice learning video. Thanks. I do have a question, if you can please clarify - does a 50 pin controller support 17 inch display. If i may ask more precisely, i'm looking for a controller board for Samsung 17 inch LCD panel (part#F199R). Please help me with your expert guidance, if you can.
question? do all lcd from portable 7in dvd players use either 40 or 50 pin boards?
hey would that adafruit converter work on a windows laptop ?
Hello,
I have an lcd, I took it out from a big printer, I would like to know if I could use it in any diy project?
Hi I have a tft lcd display 10.1 inch and the lvds cable ribbon broke I mean its still in the lcd but it broke the part that goes in the controller board is there anyway to fix that and if so where can I get a replacement lvds cable
50p controllers can use 40pin raw TTL screens, by ignoring the avdd/vcom/vgh/vgh pins, as the screens have that internally.
I found two "50p-rgb" screen to 40pin TTL FPC adapter boards on alliexpress. one had 4 pins to use external booster module. another had the boost converter onboard of course requires 5v supply.
so its not possible to passive convert 50pin display to work on 40pin controller (lvds or TTL)
hello, would you know if it is possible to convert from 40 to 50 pins? I have a yamaha music keyboard model sx600 that uses the small 40-pin display, and I would like to use some converter to use a 7-inch 50-pin display, is there any way to adapt this? thanks
please , answer me . I have a 13.3 inches lcd monitor 40 pins , pulled out from a dead android tablet . do you think these video controler boards could work with my 13.3 inches lc monitor ? it's not a laptop monitor despite its size , it is a common 13.3 inches monitor used in current 13.3 inches android tablet
Hello, I bought a 4.3 '' TFT screen and was wondering if using this TFP401 board it would be possible to connect it to an arduino.
Hi, I have a 9" lcd (L900D50-B), 800x480 resolution. Can you please tell me what driver board should I use?
sir i use arudino programing but i need 8 " display but i not decided use in tuact display so plz help me sir what display use for my project
Where can i buy touch screens snd i want to build a car infotainment. Is this possible?
I need information on a project I'm working on. Here's what I'm trying to do. I have a working LG lm x210 without a screen. Ideally, I'd like to attach a screen I have from a Vantron 5081g tablet. It has a 31 pin LCD ribbon connector. I realize not all of the pins are used, I need to know which pins are used & where they go. If that isn't possible, I have 3 other screens, the Samsung sm J100, the Samsung sm J120 & a Motorola xt 1921-8. It's a project specifically trying to see if this can be done. I can't go buy any parts or phones or anything like that, I have to use the parts I have. Any help will be greatly appreciated.
I have a 12pin Oled from a mobile phone. It's color 1.5inch Oled. How can I get a controller for it? Is there any standard for the pins on flex cable to understand. I am a embedded systems guys. Still trying to make career. Please give me insight on that Oled 12pin
hey man out of stock 40 pin lcd controller board. so i ordered (50 pin TTL only) VGA hdmi LVDS LCD Controller Driver Board online in china.
i have here my old tablet has 40 pin 7 inch lcd to 50 pin TTL ?. my question it will work or not? pls help me sir thak you and more power.
I have hp mini laptop 10"LCD Screen. And Hp persario 15"LCD Screen.
Which Cotroller board i used.....
What about zif connetors in some smartphones? Is there any board that will let me use smartphone screen for my project?
I wish you could provide a little bit more low level technical info about these displays and connectors and pinouts other than which matches which board. I am not sure but my guess is the 40 pin is the LVDS interface that is designed to work with Adafruit type of boards that have a realtek RTD266x flat panel controller that converts HDMI to LVDS. And the 50 pin versions could be the TTL (RGB+SYNC). Or perhaps 40 pin can be both and they accept a single VDD and 50 pin require charge pump VGH/VGL/AVDD/VCOM.
correct, 40pin can be lvds protocol or raw RGB TTL, with built in boost circuit (vgl,vgh,avdd,vcom).
50 pin is raw TTL, but requires external boost circuit.
so do you want cheap driver (adafruit style) or cheap screen (50pin).
the boost circuit on 40pin TTL is located on flex cable in some cases
Informative video, how difficult it is to repurpose mobile LCD displays for rpi?
Man can i connect a diffrent tipe of display on my broken Tab, It has an amoled display can i wont to connect an LCD FPS more cheeper, ore to connect to an television monitor some how, i can't use the mirroring or the HDMI adapter because It have to activate debug USB end i don't have the possibility untile i don't see anythink
Hi
Hope you are well.
I have a 7-inch tft display (no touch) when I trying to connect this via HDMI cable in my raspberry pi zero w the display goes black I trying to solve this from internet but I can't.
Can you help me to solve this problem ?
I am trying to refurbish the touch screen from an Android car radio, it has separate two wires plug for backlight and like a 50 pin or so flat cable. It's a 7" Nice display and I'd like to use iit.
The car radio amplifier went out, but the display works, so I pulled it out.
How do I find a Controller Board that corresponds LM200WD2-TLC1
Whether reverse dsi input to hdmi out adapter available ?
Hey Man! I have a project to buy LCD screens of 15" that can be used by children as a 24/7 school module in villages far away. I want to cost less than $200, use solar power, 12 nice lithium cells, a super tough glass on top of the LCD, and a standard laptop touchpad with cellotape and 3 wires in case we should change the touchpad. The idea is that 3-5 kids can learn from thousands of books for about 10 years until the system breaks. everything is fixed in cheap steel frame and metal-cement housing so it stays in one place. what do you think?
Do you loose any image quality if you convert the 50pin to 40pin? And is the image quality the same for both 50 and 40pin?
where did you buy your 40 pin controller?
I want to buy a 7 inch touch display for my raspberry and laptop as a external display
Plz suggest my a display which not so expensive but resolution and
Can I have that extra board you got from AliExpress or the buy link for that board
Hey, can you please send the link to the 50 pin driver board/controller?
YES !
sir, you are great. i am looking many LCDs with drivers on the table, may you wish me one of so little screen with driver for my diy projector? i will very thankful at your greatness. thanks.
Hlo bro please tell why are you put the HDMI to screen please tell and what is the use of HDMI and what is name of the control where we get that
Can i use it for 15inch laptop display you have buy. If yes Please share buying link
Dear amigo.. great video explaing your two boards. I am currently working on an LCD display that is part of a Smart Rear View Mirror from Junsun. The board is an Android device with 2 ports for the display. One is a 40 pin and the second of 30 pins which I found it is for the screen digitizer or touch screen capabilities. This device stoped working about 4 months after I bought it and Android keeps booting in cycles stating: Optimizing Application 1 of 1.. it reboots and it goes through the same in an infinite loop. There are no ports for me to connect anything like a keyboard or usb cable for debugging the board. So my intention was to replace the board with a Raspberry Pi 4 or Raspberry Pi Zero 2 W but I cant find a controller that can combine both the connector to the digitizer and the LCD cable and output to a single either hdmi with touch screen or USB type C with touch controls. Do you have any advice based on your experience? the display model is the WTL068601G02-18M and the digitizer part number is WJ-DR68670-v3 FPC.
Hi Sir,
I have Balupunkt key largo 970, 10.1 inch car android stereo, in which the screen resolution is very low like 1024 X 600 px which is not satisfied quality of custom android experience. is there any other way I can introduced or connect any Samsung Tab screen 10 inch screen to Balupunkt key largo 970, 10.1 and get FHD resolution?
where to buy the 50 pin green coloured
board?
Bro do you know what kind of LCD use in Google 1600 amphitheater and what type of LCD connector been use or how many pin type.
I need help for my samsung galaxy note 10.1 (n8000) the motherboard has issue and i plan to use a controller board for the screen but i dont know what pin connector to use i count it showed me 45 pins
where do you bought the cntroller, share link
Hi, Very very INTERSTING video! Thanks for your valuable experience sharing. Since I'm a TV repair man, following your example, I would like to build a homemade" device using one of the displays you show and I already have, which has the 50 pins interface. I would like to connect it to a generic TV mainboard which usually use an LVDS inteface, just to check & see if the mainboard is working & correctly sending the TV signal to the T-CON board inside the TV. Could you help me a bit to elaborate what kind of interface I could use? Thanks alot for you kindness.
Were able to find any more details? It seems to me that the 50 pin interface is TTL (VGA+SYNC) not LVDS. The 40 pins ones may be LVDS.
I can't find a controller board Ford the ED090NA-01D from the Lenovo a2109
Hlo bro can we attach a touch screen panel to phone's board ..
Hi there, could you post the links that you refer to in this video?
What is the name of the control board please?
Hi, my Samsung pro mobile display dead what i do mobile motherboard use has convert display HDMI
Do you know any controller for the lcd of the galaxy tab 3? Bp070ws1-500
Please send the link to the 50 pin Lcd controller
bro can i use mobile display with this controller
ARE ALL 50 PIN LCD THE SAME PINOUT?
Could someone link me the HDMI board and the control board? Im new at all this
Is it posible to change resolution in 50pin board from 800*600 to 800*480
Link to buy those adapters please
can it also work with y81860 v04 60 pin display
Where do we get out
Is 45 pin screen compatible with 40 pin board?
50pins baale mai kon sa mother bord kit lagay
Hello Sahaj, Do you think its possible to adapt from a 41pin LVDS edp1.4 driver to a 51 pin screen, and still drive it? 4k driver to 4k oled pannel, I'm trying to create something along these lines.
As well, Is it possible that these edp1.4 pinouts (41, 51) are universal or do each manufacturer assign different pins?
Thanks!
I wonder how to connect a smartphone mother board LCD connector to a LCD laptop connector.
please provide links to the products
Old any tablet lcd compatible?
I am having 7" waveshare LCD(B) touch display.Back light working.But no picture.I think driver controller board damaged.I have emailed to the Waveshare company. But no reply from the company.In our country (India) Authorised resellers are telling me to purchase complete set.
Where can I get the 7" driver controller board ( with touch) for the above display.
Can u send me link to buy 40pin control board
What is name modul
Can I add bigger display to my smartphone using some connectors.. directly to it's motherboard
No you cant, smartphone display connectors are proprietary and very hard to reverse engeneer
is it possible to re-use a photocopier touch screen, for projects? have you ever tried??
This is a genious idea
Can I get the link of 50 pin lvds converter I mean the AliExpress link
What type of hdmi you used
Adafruit TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - Without Touch [ADA2218]
Any controller for 30 pin lcd ?
Sir how to get display pinout from old botton phone .plzz sir
hi I need help I bought the wrong LCD controller board it has 50 pin and I have a 40 pin is there any way to still connect it with the LCD controller board
I also bought the wrong controls button it has 8 pin and where the controls button plugs in is 10 pin is there any way to still connect and make it work thnx
You can get 40 to 50 pin converters, Mr Black Cat
Hi guys, can someone point me to a 7 inch screen with good viewing angles, but 40 pins?
what is the trick to connecting the ribbon connector to this board at czcams.com/video/m_TIvYgdC84/video.htmlsi=58FhcLxEOxiFroon&t=522
Mine is very similar to yours and doesn't have the pull crimp bar like most I've seen.
Hi, can you show me how to connect my 7 inch LCD with 26 pin to a raspberry pi 3b+, can a RGB lcd hat with 40 pin be compatible to it, 26 pin lcd?
Hello can you help me. Where i can buy this 40 pin display controller 3:20
@@XannY_Designs Amazon, Banggood..
Pls man can you send me 40 pin display driver 3:20
Sir 50 pin ka jo lcd wo chahiye mil jayega
Ye display kaise parsej kare
LTN156AT35 LVDS 40-Pin 1366*768 15.6" HDMI+VGA+2AV controller drive board ------------> I need this ,please send me the link to buy it ... need delivery to india
Why a Reupload ?
There were things ment to be blurred
Can i ask something please? Are you still here to reply me?
i have a 7 inch 50pin from an old koolertron microscope. it's fhd
Sir mobile display converter sir