Hi TH! Yes it has an Eagle6 spring to take the fps up to around 340 (it's 290 stock), it has a Spectre2 mosfet, and it has been wired to deans. These are pretty light upgrades, and I'm not sure I'd recommend anything more. It's probably had 5-10k round through it now and the performance couldn't be better.
@@puffinairsoft6539 Thanks for the reply! Just bought a stock one and wanting to upgrade it, have you changed the motor at all or are you happy with the stock one?
@@tomoshughes123 No need to change the motor, it will only be worse off if you do. In fact I'd recommend against changing anything until you've had at least 5k rounds through it. A mosfet and wiring to deans will give you a tiny bit more flexibility, and no harm in putting a 350fps spring into it if you do that at the same time. However, performance (range and accuracy) gain over stock is marginal to none, and bedding in the rifle has a far bigger effect. My stock AK Storm at 290fps has virtually equal performance, and any difference appears to be from the 416 bedding in as i use it more often. To be clear, the reason you'll see no improvement in performance is that these rifles already have the best possible performance once they've been used a bit. I recommend finding the best BBs, some brands perform poorly, and you need to select the right weight. I run 0.32g in the 416 and 0.28g or 0.30g in the stock AK storm. Ensure the barrel is clean. Get the hop set right (a scope cam helps). Soon you, and everyone else, will be constantly impressed at theresult ;)
Hi, Is the Devgru Upgraded? Thanks
Hi TH! Yes it has an Eagle6 spring to take the fps up to around 340 (it's 290 stock), it has a Spectre2 mosfet, and it has been wired to deans.
These are pretty light upgrades, and I'm not sure I'd recommend anything more. It's probably had 5-10k round through it now and the performance couldn't be better.
@@puffinairsoft6539 Thanks for the reply! Just bought a stock one and wanting to upgrade it, have you changed the motor at all or are you happy with the stock one?
@@tomoshughes123 No need to change the motor, it will only be worse off if you do. In fact I'd recommend against changing anything until you've had at least 5k rounds through it.
A mosfet and wiring to deans will give you a tiny bit more flexibility, and no harm in putting a 350fps spring into it if you do that at the same time. However, performance (range and accuracy) gain over stock is marginal to none, and bedding in the rifle has a far bigger effect. My stock AK Storm at 290fps has virtually equal performance, and any difference appears to be from the 416 bedding in as i use it more often.
To be clear, the reason you'll see no improvement in performance is that these rifles already have the best possible performance once they've been used a bit.
I recommend finding the best BBs, some brands perform poorly, and you need to select the right weight. I run 0.32g in the 416 and 0.28g or 0.30g in the stock AK storm. Ensure the barrel is clean. Get the hop set right (a scope cam helps). Soon you, and everyone else, will be constantly impressed at theresult ;)