I just got this sewing machine out (my husband had clutter all around it) in the office. I had no idea where to begin and now, after watching your very comprehensive tutorial I feel much more confident than I did 15 minutes ago! Thank you so very much!
Wonderful tutorial, I have the same machine about 8 years now and I just learn something about it from you, please continue with more tutorial please, thank you very much.
@@TiffanyGordonCosplay I ended up with mine after another model of Brother (super similar one though) kicked the bucket. Glad to see others out there use this machine!
OMG Tiffany thank you so much I really enjoyed this video. I was gifted this machine 2 yrs ago and I been. I've been wanting to learn to embroider, you just boosted my confidence to get started. I subscribed for more videos again thanks. Happy Holidays to you. 🌲
I ran across this video on the machine I just purchased and yours was the easiest most simple understanding video I've ever seen! Thanks. Do you have one on setting the machine up for embroidery?
How do you decide what thread tension to use? My thread keeps bunching up. It looks ok on the top of the fabric, but the bottom is all crazy and the upper thread sometimes breaks. !
Very nicely explained. I have problems threading the needle. I have followed all steps and I still have the problem. Can't figure what am I doing wrong?
if you are having problems with the automatic threader it may be your sewing machine needle. Some types of needles have a smaller "eye hole" that the thread goes through and the automatic threader will not work for it. Follow all the steps to the end when it cuts the thread and then you will have to put the thread in the eye hole by hand. Hope this helps 😁
I pattern and sew every cosplay that I make using this sewing machine. 😊 Its only recently that Iv starting doing sewing tutorials for them and there is a denim jacket, denim skirt and an anime robe tutorial coming in the next few months.
Could be a few things. 1. the sewing machine needle "eye hole" may be to small for the pre threader to work with and for this you will have to thread it by hand 2. the thread you are using is too thick for the "eye hole" to go through and you may need to change needles 3. the position of you sewing machine needle may be off, turn the knob on the right to make sure it is in the lowest setting or turn the machine off and on again for it to reset in the correct place
This is the most comprehensive, clearest, and most helpful tutorial I think I've ever seen. Thank you so much!
Thanks! I'm glad I was able to help 😁
I just got this sewing machine out (my husband had clutter all around it) in the office. I had no idea where to begin and now, after watching your very comprehensive tutorial I feel much more confident than I did 15 minutes ago! Thank you so very much!
So glad you found my video helpful! Best of luck on all your new sewing crafts to come =]
I don’t know if y’all know there is and se400/425 Facebook Page, that is awesome. My Granddaughter and I have learned so much from this page.
Whats its name?
Wonderful tutorial, I have the same machine about 8 years now and I just learn something about it from you, please continue with more tutorial please, thank you very much.
Thanks, will do!
Excellent 👍
This video is a perfect tutorial, thank you for explaining and showing it so thoroughly.
Glad it was helpful!
Thanks I needed a refresher coarse on the basics.
Glad to help and happy sewing 😁
Yay! I'm so happy to see you making sewing tutorials 😄 Excellent job!
Thank you! 😊
Thank you so much for making this video
It's my pleasure
AAAAH! I have this machine! Its been such a good little workhorse. What a great tutorial you've made.
awww thank you! iv had the machine now for a few years after my singer broke and i havnt looked back 😁
@@TiffanyGordonCosplay I ended up with mine after another model of Brother (super similar one though) kicked the bucket. Glad to see others out there use this machine!
This was so amazing concise ! I needed this!
Glad to help 😊
OMG Tiffany thank you so much I really enjoyed this video. I was gifted this machine 2 yrs ago and I been. I've been wanting to learn to embroider, you just boosted my confidence to get started. I subscribed for more videos again thanks. Happy Holidays to you. 🌲
Welcome to the community and happy holidays to you and your family!
Wonderful, easy to follow. Thank you 😊
Glad to help!
Just got this machine from my Mother...looking forward to more tutorial videos
Happy sewing!
thank you for the video, Tiffany☺️♥️
You are so welcome!
Thanks very easy to follow you
glad you found it helpful!
Thank you awesome thorough video 😊
Glad you enjoyed it!
Thank you so much!
Glad you liked it!
I ran across this video on the machine I just purchased and yours was the easiest most simple understanding video I've ever seen! Thanks. Do you have one on setting the machine up for embroidery?
ty and glad you found this helpful! I unfortunately do not have a vod for the embroidery yet.
How do you decide what thread tension to use? My thread keeps bunching up. It looks ok on the top of the fabric, but the bottom is all crazy and the upper thread sometimes breaks.
!
good job
Thanks!
Hi, watched the basic video. Great job with that, it was very helpful. Can you please explain how to set the needle in a different position.
Great suggestion! Ill add it to my list 😁
Very nicely explained. I have problems threading the needle. I have followed all steps and I still have the problem. Can't figure what am I doing wrong?
if you are having problems with the automatic threader it may be your sewing machine needle. Some types of needles have a smaller "eye hole" that the thread goes through and the automatic threader will not work for it. Follow all the steps to the end when it cuts the thread and then you will have to put the thread in the eye hole by hand. Hope this helps 😁
Is there anyway you can tell me how to adjust the stitch length
Trying to find this machine for sale is hard
Can you provide more se 400 sewing ideas? What do you sew?
I pattern and sew every cosplay that I make using this sewing machine. 😊 Its only recently that Iv starting doing sewing tutorials for them and there is a denim jacket, denim skirt and an anime robe tutorial coming in the next few months.
Like video very nice
Thank you very much!
@@TiffanyGordonCosplay your are mast wlc 🙏❣️
Hi Tiffany can you tell me the types of needle I can purchase in the store please thank you
Olá tudo bem? Ela tem entrada para pan drive ?
What computer do you use
TIL the cylinder thingy is called a bobbin.
🙂
Im having an issue on step 9 the thread does not go through the sewing needle. Any advice. thankyou
Could be a few things.
1. the sewing machine needle "eye hole" may be to small for the pre threader to work with and for this you will have to thread it by hand
2. the thread you are using is too thick for the "eye hole" to go through and you may need to change needles
3. the position of you sewing machine needle may be off, turn the knob on the right to make sure it is in the lowest setting or turn the machine off and on again for it to reset in the correct place
How do you get this to make a simple zig zag stitch I can not seam to find which one to use
#7 is a basic zigzag stitch
Is there still a Brother SE-400?
Amazon and Walmart still have them so id say yes!
Does it work for leather
I use it on leather all the time. You will need specific sewing machine needles for leather and there are thickness limitations for leather as well.
You didn't show how to do a backup to lock the thread in place and then move forward. .
Just watched the video to see how beautiful you are 😗
you're loading the thread spool the wrong way...just sayin'