Safe parallel charging with the HGLRC Thor Pro 6 port parallel charging board.
Vložit
- čas přidán 31. 01. 2023
- Today we are looking at a 6-port parallel charge board from HGLRC. I used to be a bit scared of parallel charging because of some incidents with some cheap board with no protection. The Thor boards aim to make parallel charging as safe as it can be, so let's go through some of the do's and don'ts of parallel charging as we look at the product.
(if you are a regular viewer and are wondering where I've been for the last month and a half... the answer is "mostly ill")
If you want to check out these products in more detail, here are some links.
Thor Pro 6 Port - www.hglrc.com/products/hglrc-...
Thor Pro 4 Port - www.hglrc.com/products/hglrc-...
If you liked this video and want to show your support please feel free to join my Patreon supporters here / currykitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it www.banggood.com/?p=E81211714...
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here www.currykitten.co.uk/support-me/
Very good boards. At 8:50 you mention the red light and no protection. On the back of the board is stated: "Battery Balancing Connector Protection: There is an indication of LED when Self-resetting in short circuit situation in thermal fuses between every balancing pin.". If I'm correct every balance wire is protected by a Poly-fuse, mounted on the back of the PCB. The fuse comes in if they overheat. After cooling down they work again.
It does say that, but I tested it by leaving the short circuit connected for a few minutes and I managed to get some smoke out of it - which seems that the protection could be better
@@CurryKitten Thanks for the warning. From the 1000 times of charging there was 1 time when I was distracted during plugging the connectors and the red LED and the large fuse saved my LiPo packs.
Fantastic review and tips, Wayne! Thanks! 😃
I have the first version, it's freaking great!
Stay safe there with your family! 🖖😊
Cheers MC - yep, the original is a cool little board. Mines not going anywhere :D
My buddy also does his charging in his grill. Great video, thank you!
Great idea, and if it goes wrong, his BBQ is already lit :D
Excellent review. Today I still have a great hesitation to using parallel charging ports. But I certainly see the advantage. I currently have several chargers that will do four batteries simultaneously.
Thanks very helpful I fly avata but thinking of getting aos 3.5 4s fpb drone. I have m4 lipo charger a bit small but it will do.
Good video, thanks for the tip about the balance leads. I just hover in my room for about 3 minutes to discharge. I cans see the Velcro fuzz on the back of your batteries.Do you use Velcro on your drones? Or do you use these batteries for your goggles ?
The THOR rocks! Love this company. They make high quality and i appreciate that 👍👍🇺🇸🔥
thanx for the refresher ++++
No worries!
Thanks for the video! Do you think the HOTA D6 Pro could charge 9.3A for parallel charging 6 1550mah lipo HV at the same time?
I think so, I don't have one - but looking at the watts per channel, I think they could do around 10ish Amps at 6S voltage
hey if I have 5x1500mAH and 1x1050mAH battery does that mean I can set the charger to 5*1.5+1=8.5C? theyre all 6S
Although it may be possible to do, I personally would mix my capacities of lipos, so I'd charge the 5 x 1500mAh at 7.5A to stay at 1C and charge the 1050mAh seperately
@@CurryKitten thank you :)
Is this better than the Strix Ultimate?
Checking batteries are balanced pre charging?. None of mine are...and you storage charged them to make them suitable candidates for parallel charging..?...Did I miss something...🤔😳😳🇬🇧
Yeah - I did cover that. Each cell on each lipo needs to be within 0.1v of each other and I mentioned storage charging my lipos so that I'd expect them to all be suitable. Or are you saying something else ?
@@CurryKitten No, you covered it perfectly. This is why I don't do parallel charging...I was just checking I had it right...🤔🤔😳😀
Yeah - there's a lot to be careful of. Extra time and attention is needed
I need 8 ports.
Not sure if I've seen an 8 port parallel charger, but I've used 2 parallel charge boards into a dual port charger before
Heloooo Chris
What's up Gary?
@@CurryKitten waiting for summer. How's your knee?
Pretty good these days thanks