Thanks for the video, made the process very easy. It was identical on my 2017 red sport. I didn't do the glove compartment though because I'm too lazy for that 😅.
What about the 2 small interior bulbs above our heads? Can that be pryed apart? I dare try it until I know it's doable. Cheers. Good video, which I came across it sooner, as I figured the others out myself! 👍
Thanks for taking the time to demonstrate how to do these bulbs. I would only add that you should wear thin latex gloves to prevent oil from your fingers from getting on bulbs.
No need, you are thinking of high temperature bulbs for headlights, these are low power, low heat LED's, no need to wear glove and wipe the LED modules clean etc.
A couple of tips as I did them: -you can use a flat head screwdriver -you don't need to remove the wire off the puddle lights, you can do as is -to get the bulb out of the door lights, pull them from one side and wiggle to loosen, and then pull from opposite side -For the door lights, push a flat head on the top and make your way to the clip and pull it out
However, disclaimer I would highly suggest doing what he shows in the video first. He is a professional and probably did everything properly and safely.
Hi guys Nice video I got infiniti q50 2015 I have all done with interior leds The question is how to change dome lights to leds ??? I tried a little bit but i don`t want to brake it
Thanks for thorough video! Couple questions.. 1: My '18 seems to already have led license plate bulbs enclosed within the housing...so no need to replace? 2: How to test glove box? My, oem one, isn't lighting up so must be burnt out?..
Hi, thank you for tuning in! The license plate lights on the '18 are indeed stock LED so you cannot replace them. If you glove box light is not on when you open the glove box it has probably burnt out. Hope that helps!
Great video! I bought and installed the interior lights as shown and was so impressed with the brightness that I would like to get the trunk light. Do sell them separately or do I have to buy the entire kit?
Yes, this kit is indeed compatible with your vehicle, and the installation process would be identical to as shown in the video. You can find the direct product link in the description of the video.
Do you guys have the same interior lighting for the 2015 Infiniti Q70 & 70L? I’m also interested in the Infiniti symbol that goes on the grill that can light up and change colors.
Yes, that is correct, the Q70 and Q70L would use the same LED kit linked in the description. Also, the light you are referring to as the Infiniti symbol would be stock LED, which you cannot replace as it is soldered to a chip and board.
Do these LED replacement bulbs come in other colors besides the cool white shown in this video, such as a warmer light (towards the yellow warm color spectrum)?
I was looking at the premium kit and I need the vanity mirror LEDS but when I search in your database they don’t look similar as the ones shown with the premium kit will they still work?
I commented on your other video the g37 which I didn't know that you have this q50 video conversion too which what I'm looking for. What color output temperature of led you used on all bulbs?
Yes, we do have listed the installation process for your 2017 Q50 would be identical to as shown in the video. You can find the compatible package for your vehicle in the description of the video.
Check out 1:02 of the video for the dome light installation! If you were inquiring about the front dome lights, I believe those are factory LEDs, which are soldered to a chip and board.
Thank you for your interest. The rear dome lights for the Q50 are the small lights just above the rear doors. It does indeed show this installation in the video.
Thank you so much for taking the time to create this video. This has helped me a lot, especially with the glovebox. Much appreciated!!
So glad you guys took the time to create such a high quality instructional video. Very well done! 🤜🏼🤛🏼
Thank you for the support and for watching!
Cars of this caliber should have LED's standard.
Agreed!
Thanks for the video, made the process very easy. It was identical on my 2017 red sport. I didn't do the glove compartment though because I'm too lazy for that 😅.
Thanks for tuning in!
If anyone is wondering, i did this same installation on my 2014 and the process was identical.
Thanks i was about to ask that lol
How do you do the dome light by the sunroof button ?
@@StylesBlender Not easily, those lights are soldered on the circuit board, so the assembly has to be removed and taken apart first.
Same here! Just did it on my Q50 S and it was literally the same process.
aviography do you have a video of that?
What about the 2 small interior bulbs above our heads? Can that be pryed apart? I dare try it until I know it's doable. Cheers. Good video, which I came across it sooner, as I figured the others out myself! 👍
I need this info as well
Thanks for taking the time to demonstrate how to do these bulbs. I would only add that you should wear thin latex gloves to prevent oil from your fingers from getting on bulbs.
No need, you are thinking of high temperature bulbs for headlights, these are low power, low heat LED's, no need to wear glove and wipe the LED modules clean etc.
Thanks for the advice!
Great video! Just did this on my 2014 Q50 S and it was the same process.
Good to know! Thanks for watching!
A couple of tips as I did them:
-you can use a flat head screwdriver
-you don't need to remove the wire off the puddle lights, you can do as is
-to get the bulb out of the door lights, pull them from one side and wiggle to loosen, and then pull from opposite side
-For the door lights, push a flat head on the top and make your way to the clip and pull it out
However, disclaimer I would highly suggest doing what he shows in the video first. He is a professional and probably did everything properly and safely.
Gurjit Singh how do you replace the little dome lights by the sunroof button?
Thanks for your input!
Finally someone changes glove box light on a car
Thanks for watching!
How much diff is it from the 2015?
Wonder why the rear dome lights arnt led like the maximas 17+. Since infinity is the more upscale version than Nissan 🤷🏻♂️
Infiniti
🤷♂️
Would it work for 2015 3.7?
how to change the map lights?
What about the front dome lights?
You're awesome brother . Stay blessed !
Hi guys Nice video I got infiniti q50 2015 I have all done with interior leds The question is how to change dome lights to leds ??? I tried a little bit but i don`t want to brake it
Did you ever figure it out?
The dome lights we have listed are already factory LEDs.
Will this work for 2017 infiniti q60
Yes, that is correct!
Thank you for the bulb replacement video. How about the front dome lights on the Q50 2016. There are two map lights. Can those be replaced?
In the owners manual it says they are LED, so really no need to change. Looks like it would be difficult though!
These lights we do have listed as factory LEDs, which are typically soldered to a chip and board.
Thanks for thorough video!
Couple questions..
1: My '18 seems to already have led license plate bulbs enclosed within the housing...so no need to replace?
2: How to test glove box?
My, oem one, isn't lighting up so must be burnt out?..
Hi, thank you for tuning in! The license plate lights on the '18 are indeed stock LED so you cannot replace them. If you glove box light is not on when you open the glove box it has probably burnt out. Hope that helps!
@@PrecisionLED Thank you for this insight!!
Great product and very happy with them!
Hello! Do you know how to change in q50 two lights near eyeglasses case. Help plz!
Other than the vanity bulbs they all use the same bulb size ?
Great video! I bought and installed the interior lights as shown and was so impressed with the brightness that I would like to get the trunk light. Do sell them separately or do I have to buy the entire kit?
You can indeed purchase the trunk LED separately, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
I have a 2015 sport. Will this kit work for me? If not point me in the right direction please
Yes, this kit is indeed compatible with your vehicle, and the installation process would be identical to as shown in the video. You can find the direct product link in the description of the video.
Would this kit fit 2014 Q50? All lights that you changed looked no different.
Thank you for your interest. Yes, the kit used in the video (and in the description) are compatible with your 2014 Q50.
my screw fell in between glove box 😢
Which one is the same of front dome LED the 600 or 800 ?
Will this fit my 2017 q50 premium
Yes, that is correct, the LED kit listed in the description is compatible with your 2017 Q50.
Very rad, thanks!
Thanks for tuning in!
is this same process for 2021 q50?
What’s the difference between standard and premium
What size did you say for the vanity mirror ?
This would be a 29mm x 5mm fitment, which you can find here: www.precisionled.com/festoon-29x5mm-2-smd-led.html
How do you remove the whole interior light
is there a package for 2018 q50 red sport 400? or would the premium fit?
Thank you for your interest. The Premium kit listed in the description would be compatible with your 2018 Q50 Red Sport.
Do you guys have the same interior lighting for the 2015 Infiniti Q70 & 70L?
I’m also interested in the Infiniti symbol that goes on the grill that can light up and change colors.
Yes, that is correct, the Q70 and Q70L would use the same LED kit linked in the description. Also, the light you are referring to as the Infiniti symbol would be stock LED, which you cannot replace as it is soldered to a chip and board.
What is the size of the trunk light bulb? I have a 2018 Q50 Luxe
Thank you for your interest. The trunk would use a T10 fitment, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
How do you change high beam bulb for headlights
If I want to have bulbs that are closest to the 2 dome lights in the front, should I go for the 6000k or 8000k?
I know this is a month back but the front dome is pretty warm, I think they’re like 5k. I went too cool on my leds with 8k
What is the size of the led for the glove box? and do you sell just that led bulb alone or is it only in the kits? Thank you in advance!
This would be a T5 fitment, and you can find it here: www.precisionled.com/shop-by-led/automotive-leds/t5-wedge-led.html
Do these LED replacement bulbs come in other colors besides the cool white shown in this video, such as a warmer light (towards the yellow warm color spectrum)?
The two colors we carry are the 6000K crystal white, which projects a warmer white color, and the 8000K cool white, which projects a cooler white.
@@PrecisionLED Is the 6000K really warm or is it bright white?
It is a pure white, warmer than the 8000k but not warm like a yellow.
Hi! How about footwell lights??
This car did not have footwell lights, but if we come across the same model that does we will do an updated installation video!
So what’s the real difference between standard 8000k vs premium 8000k lights
This video explains the differences:
czcams.com/video/eES-rxFew00/video.html
I was looking at the premium kit and I need the vanity mirror LEDS but when I search in your database they don’t look similar as the ones shown with the premium kit will they still work?
Please feel free to reach out to us at help@precisionled.com and we can clarify any specific questions you may have!
How to replace map bulbs?
These lights we do have listed as factory LEDs, which are typically soldered to a chip and board.
GREAT VIDEO!
Thanks for watching!
I commented on your other video the g37 which I didn't know that you have this q50 video conversion too which what I'm looking for. What color output temperature of led you used on all bulbs?
Thank you for your interest. For this installation video the 6000K color was used.
why not use the 5730led for license plate light？
We have found that the standard LED works better for license plate lights.
Is there anything different in the 2015 Q50? Otherwise, do you a set that fits the 2015?
Im wondering the same thing
We do have a kit for the 2015 Q50:
www.precisionled.com/infiniti-q50-premium-led-interior-package-2014-present.html
Does these lights work on 2017 q50 red sport?
Yes, we do have listed the installation process for your 2017 Q50 would be identical to as shown in the video. You can find the compatible package for your vehicle in the description of the video.
I was hoping to see how to change the two dome lights in the front 😕
That’s what I’m trying to figure out now lol
These lights are usually factory LED.
What size is the visor bulb?
The vanity mirror would use a 29mm bulb, which you can find here: www.precisionled.com/festoon-29x5mm-2-smd-led.html
What about the dome light?
Check out 1:02 of the video for the dome light installation! If you were inquiring about the front dome lights, I believe those are factory LEDs, which are soldered to a chip and board.
I mean the map light
@@jamalwilliams5724 These lights we do have listed as factory LEDs, which are typically soldered to a chip and board.
What about lights next to your feet?
The footwell lights would be a factory LED, which you cannot replace as it is soldered to a chip and board.
Is this install with the 8k Cool whites? I want to match my stock ones (that I’m not replacing) as close as possible.
The 6000K color temperature is used for this installation 6000K would be the best choice when trying to emulate your stock LEDs.
Will this kit work for a 2014 model?
Yes, that is correct, the kit linked in the description is indeed compatible with your 2014 model, as they are listed in the same generation.
how a out the dome light for the q50
Thank you for your interest. The rear dome lights for the Q50 are the small lights just above the rear doors. It does indeed show this installation in the video.
PrecisionLED what about the front dome lights? Can you change those?
@@alpha_qrs I tried to do so Not easy and i stoped before brake it Did u get any solution how to do it I tried to find everywhere but no answer
Thanks a lot that tape method to remove door led helped me out 👍🏽💯 subscribed