Fiber Optic Interior Ambient Lighting Install - RedlineMods
Vložit
- čas přidán 17. 12. 2021
- Fiber Optic Ambient Lighting Install for any vehicle.
Use BSTDWPZ15 Discount Code
Ambient Lighting:
www.redlinemodshop.com/produc...
All Products:
www.redlinemodshop.com/collec...
PRODUCT INFORMATION
Comes with free app.
Supports more than a dozen of lights modes, such as RGB color changing, strobe mode, steady on, sync with music, and timing.
High Brightness with low power consumption
Fiber can be cut to any length, comes with cladding for easier installation
Can change the speed and brightness
Made of eco-friendly material, durable, and flexible
APP and Remote control
28 Feet Fiber
8 projectors to cover center console and all 4 doors giving your car a complete transformation
RGB 5050 LEDs
Full color RGB Lights
3mm Diameter
30,000hrs Life Span
6W power
12V Voltage - Auta a dopravní prostředky
You forgot to show the most important part, how to route the cable into the car… 🤦🏽♂️
I mentioned it but recording it is too difficult. Mainly comes off the side door grommet into the surrounding panels. Passenger routed under the glove box. Driver side routes under the steering wheel. Zip ties and that's it. Camera angle is too tight to capture all that.
@@BoostedWhipz Did you push the wires through the rubber grommet between the door and the car?
Yes. Pain in the rear but yes.
Exactly. I think the version I seen where they open the door panel and connect the wire to the door controls for power is a lot more professional looking.
@@SWACBUZZ I agree but I am trying to figure out the plug & play part in terms of where do they get the piece!
Spent the whole time waiting to see how to get the wire back into the car. Glad to see I wasn’t the only one
I just bought this kit and I was a bit confused at first but I appreciate the good details you gave bro
Some of us would assume this would be a our job tops. But some door jams have custom harnesses instead of a simple rubber grommet of which will require drilling. In my opinion not worth it if you have a newer vehicle. But awesome video in regards to the product and what it looks like
Feel like you skipped over the hardest part of the installation. How did you get the wire from the door back into the car?
Same way ur window electronics come in...
Did you just show the two doors as an example and the “how to”… but 26 feet would be enough to cover a ton of the interior, no? How much do you end up cutting off/losing? Just received this today, and your video is invaluable. Thank you 🙏🏼
How exactly did you run the diode electricals back to wherever they get their power? Where DO they get their power? From the cigarette lighter?
Great video man. Simple and to the point I like it. Good job
Can you see the bright spots in IRL or is that just the camera picking it up?
Were all your power cords (projectors) the same length? Should the longer ones go in front or back?
How did you get the optical cable inside the plastic holder?? Been at this for hours and there's no way
Is there a way for us to look at our car door and determine if it will require drilling?
So first off for it to work you had to plug it in a usb ?how is the cord running ?
That looks fire!! 😍🔥🔥
Looks cheap like the rest of car
Your comment is cheap 😃
My kit came with a wire and the one that you installed do I have to use both put the wire inside of the one that goes into the panels like you did which is better or wsid
thx this, helped me a lot
Do you drive with the window down and the rest of it just hanging out the window
thought that theres a actual fiber optic cable that you suppose to feed through that strip . thats just routing strip to secure the fiber optic cable man. Just a heads up. it will look alot cleaner and brighter with the fiber optic use which you can buy seperate
How do you cover/block parts of the plastic strip in places you don't want to see the light, like on the edge of the door panel after the 90* bend upwards?
Put black electrical tape
@@BoostedWhipz ...I figured it could be something as simple as black tape, but I thought there could be a better way, especially if you have a gray or beige interior. then I guess depending on what color your door panel is will depend on the color tape you need to track down...or just be content with the part of the strip that sticks out....
Drill a hole, and put the end through it
Bro thanks for the information
Can you do a video installing ambient lighting on ur G70s? I was hoping to do it to mine but wasn't sure the best way to go about it.
Same here lol... panels are tight af.
It is possible to link and control multiple devices at the same time within the Lotus Lantern app. This is a question I had when I bought two separate lighting devices.
I couldn’t find the answer to this question anywhere. I was happy to find out this was possible when my devices arrived.
How much feet is needed for a dashboard?.
Could you please tell me where did you put the connector with the led light at?
How did you hide the cables amigo?
Looks easy
Where can i order the exact peace,please answer. Love from Germany. Thanks for nice video.
What about the Dashboard?
i can’t get the fiber tubes through the other tubes
nice video.nice guy.nice car.nice everything. thank you for this great video
Would you say that this kit is one of the best on the marjet?
For me it is.
U have to use remote control every time or they start automatically with turn on the engine?
If you leave the main power set to ON it will turn and off with engine since its an accessory.
@@BoostedWhipz thanks
Do these work for trucks? Specifically 2011 models?
It's a universal kit. Works on everything. What you need to determine is if the included fiber is long enough or if you need more.
Could I wire tap the power cable into some intsead of using cigarette lighter
Should yeah.
Could you link the exact product that you use? I saw the product information in the description but it took me to the website and not the actual product
Just updated description.
@@BoostedWhipz Thank you! Do you know any cheaper alternatives?
Nope
When I connect my plastic tubes to the main light module, there is no light visible through the tubes even though the main light module things has lights in them. Can you please help me with that ?
Gotta contact the vendor you bought from. I wouldn't know.
What is the app called?
by any chance u know the app called to change the color of the lights ?
Its called lotus lantern
My lights won’t go through the full strip on the door. Did yours do this too?
Same problem, they are not that bright enough if the cable is over 1 meter long
Mine worked fine as seen on the video towards the end. Which kit did you buy?
Can you tell me how to do the same with cars that has leather interior, it’s easy to insert the fiber optics through the plastic frame gaps on the door, but with leather it’s difficult to do it and it keeps coming off
Each car is different gotta find the best method.
whats the app called? got it installed on my car but lost the manual and trying to figure out the app name.
Lotus Lantern X
Doesn't show where the diode wire is connected to the power source?
I don't show the routing but yes connected to power.
Touching on the Ebay and Amazon comment. Ebay has 5m, 6m, & 8m. 5m is 4 in 1. 6m is 5 in 1 and 8m is 6 in 1.
Does this actually stay in the car or does it fall out of the grooves in the door
Stays on mine.
@@BoostedWhipzcool, thanks for the reply.
how did you pass the wire from the door to the inside part of the car? This is what I wanted to see.... :(
In my accord, I ran mine under the door floor panel and under the seat. I was most comfortable with this so the cables are nowhere near the pedal and brake.
is there any way to do it without prying the inside ??
Unfortunately no unless you want the wires showing and hanging
@@BoostedWhipz aww thanks tho!
Can you cut the fiber optic ? Is that how you were able to run it through the whole car ?
Yes.
Hi can i cut and connect it directly in power window switch?
You could if you know how to.
@@BoostedWhipz thank you sir
... why not splice the main harness (12v cig plug) into the lights fuse slot with an add-a-fuse...it will help keep wires out of sight and it will turn on with your lights...yes, some cutting and splicing is necessary, but in the end it will look cleaner.
Where do you hide the cords?
More than likely behind the door panel, through thr rubber boot, either under the carpet on the floorboard or tucked under the dash routed to the 12v.
Hi
Where did you put he attached cord to hide it
Behind the door panel and then all routed cables below glove compartment zip tied.
Sedahhhhn
is this el wire
could i buy separate projectors if i need more than 6 projectors
Not sure.
Two words
Engine firewall, for those less mechanically inclined
Can you come do this one
Is here any video that actually shows you how to completely wire this ?
Unfortunately no because it gets very messy from the video angles.
Get it. Now.
Did you install any on the g70
I wanted to but panels and location are a bit of a challenge. I do have underglow.
@@BoostedWhipz lol that’s the only reason I haven’t got the car yet. I was thinking about the stinger, but I love the g70 a bit more. I know I can install some under the footwell but I want them in my door panels as well.
@@Quez5k Are you telling us you’re basing your car selection on whether you can put lights in the door panel? You silly goose!
Please put the link of the product i cant find that productt😢
In the description details
I need to know where is the wire into the car smh!!! I like the video but it’s not helping me with the hard part .
What color is that wrap?
On the Civic?
The genesis
Not a wrap. It's a factory paint. Only 250 produced worldwide.
Lol I feel dumb
Go ahead and
What's see dawn?
Huh?
what is app name for phone
Reach out to Redline Mods on IG.
they always skip the step i dotn know how to do so annoying.
I thought you were putting light in the first car
Which one?
I bought some cable just like this. It is way too thick. Looks horrible. (Just my opinion, not towards your install)
7:47 bro was to masculine to say pink
Lol... I rock pink and purple on my car... but that was Magenta 🤣
buy on amazon same thing for $35. buy on his website for $135???????????
Not the same one I believe
These are terrible. Spend the money on the symphony RGB. I wasted so much time installing these only to find out they get way dimmer as they get farther from the light source.
NOT FOR SPORTS CAR. Sturdy, safe but not good for sports car.
😂😂😂😂😂😂😂 “made out if fiber optic” that’s not a material 😂😂😂😂😂😂😂
Poor demonstration
This video is literally pointless, he shows you nothing just a bunch of senseless talking
Most useless video kid can do that. But no wiring
Gay asf. Where can i buy?
Details in description lol