How to Replace Engine Oil Pan 2002-2008 Dodge Ram 1500
Vložit
- čas přidán 10. 05. 2023
- Buy Now!
New Engine Oil Pan from 1AAuto.com 1aau.to/ia/1AEOP00202
This video shows you how to install a new TRQ oil pan on your 2002-2008 Dodge Ram 1500. The oil pan holds engine oil to be pumped up to the engine. A leaky or damaged oil pan will lead to low oil levels, or no oil at all, which can cause major damage to your vehicle's engine.
This process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500
Tools you will need:
• Pry Bar 1aau.to/oRh/1AXAA00020
• 15mm Socket 1aau.to/obop/1AXAA00015
• 18mm Socket 1aau.to/oadm/1AXAA00043
• Torque Wrench 1aau.to/oazR/1AXAA00044
• Gloves 1aau.to/oWQ/1AXSS00048
• Paper Towels 1aau.to/oBg/1AXSS00035
• Safety Glasses 1aau.to/oP2/1AXAA00343
• Bucket
• Floor Jack 1aau.to/oZH/1AXAA00068
• Hammer 1aau.to/oSf/1AXAA00091
• Jack Stands 1aau.to/oRb/1AXAA00065
• Pole Jack
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This is by far the best auto repair video I've ever watched! And unfortunately it demonstrates to me, without a doubt, that I in no way have the ability or tools to undertake this project. Thank you very much for making this and I hope you have much success with your future videos!
This is great. Can you also do a video on replacing the oil pump? Your videos have been a fantastic tool for me over the years 😊
Well done sir. Perfect, simple job over view. With torque specs and order. Good stuff!
Now do you absolutely have to jack the engine up. I saw another video the guy didn’t even touch the mounts. I will be doing mine from under the truck on ramps.
4th gen Ram has “3” transmission mount nuts to remove. (this video shows 2 only for this gen 3 ram)
I followed along this video to replace my oil pan on my 2011 ram 5.7 hemi 4x4. I made the mistake of only removing 2 of the 3 transmission mounts on my 2011 ram. This caused my engine to not lift up straight so when I was finished and lowered the engine… my engine was not aligned on the front motor mounts. I was able to align the engine with a pry bar, but reflecting back on doing this …it was not safe and could have caused an accident. My engine mount alignment problem would not have happened if i had removed the 3nuts. But i did complete it… my truck has a new oil pan and is running perfectly now.
I really appreciate these videos . Thank you
Love your video man
Thank you God bless you
I have 2012 1500. Is it the same process?
Where can I find a video for a 4x4? Since the differential is in the way
Where can I buy one of those cross members mine rotted
Torque specs for cross member bolts??
Thanks
Vary professional tks.for tork lbs on all bolts.
Is this a 6 cylinder?
I get this is an older ram, but im assuming this is nearly the same process for a 5th gen ram with a 5.7 hemi
@inspectz13 did you ever replace the oil pan using this videos steps? got a 2011 5.7 and about to start but have sone doubts
I did it to my 4th gen … only difference is that the transmission mount has 3 nuts to take off on a 4th gen… the video only shows 2 being taken off because it is a different design. double check your 5th gen for differences in design too
This video missed the rtv between the oil pan and the gasket, you need it between the gasket and the block and between the gasket and oil pan
I hate technicians, crazy amount of work for something so little.
All this work for a dang oil pan. 🤬 yeah my pan just blew down the interstates has a small hole towards the drain plug at the top.
All this just to replace a damn gasket. Smh. It makes a cheap job expensive af. For no reason!!