Burnham IN8 Gas Steam Boiler Installation with Power Mate Hand Truck
Vložit
- čas přidán 8. 09. 2024
- Got Steam Heat? Need a new gas steam boiler? Today we removed a grossly oversized 9 section Burnham SIN9 and installed a IN8 245k gross input BTU gas fired boiler. Watch as we disassemble and remove the cracked boiler, bring the new boiler down to the basement with our electric hand truck, pipe-in the new boiler and startup and commission the new equipment.
Join this channel to get access to perks:
/ @pipedoctor
Check out our mobile dispatching and invoicing app! It's cheaper than HouseCallPro and much easier to use! tinyurl.com/Se...
What’s in your Veto? Here is mine:
Veto TP-XXL amzn.to/3zX10vg
Milwaukee M12 Fuel 1/4" Impact Driver amzn.to/3I9yLfI
Wiha Allen Keys: amzn.to/33ipGmb
HIKMICRO B20 amzn.to/33iGklx
Furnace Switch amzn.to/31X89PT
Milwaukee Light amzn.to/3I38Lmh
Wagos amzn.to/34QoiaU
Milwaukee Set amzn.to/33vnQOz
Torpedo Level amzn.to/3no1oOk
Crescent set amzn.to/3GtZeV8
Wiha 7 piece set amzn.to/3rkISaK
Milwaukee step bit amzn.to/3I395Bv
Flare wrench amzn.to/3noJZ8s
Ridgid 10” wrench amzn.to/3GvRnqa
Fluke non-contact tester amzn.to/31VQgAQ
Klein drivers amzn.to/3qoe21W
Knipex Wrenches amzn.to/3trzFjS
Klein 11-1 amzn.to/3tpsPLD
12” crescent amzn.to/3A0CZ6S
Gerber Gear Pocket Knife amzn.to/3foaW7I
Yellow Jacket Hand Ratchet amzn.to/3nrDgup
I am on Reddit, Discord & WhatsApp!
Reddit: / pipedoctorny
Discord: / discord
WhatsApp Group: chat.whatsapp....
Please support this channel and Mikey Pipes and consider the following…
Pipe Doctor long-sleeve shirts featuring “Let’s Go Bosch” on rear
Minimum donation of $11 to cover shipping expenses
Pipe Doctor long-sleeve shirts are available in Medium, Large & XL
Minimum donation of $34 is appreciated
Pipe Doctor FlexFit Embroidered Caps
Minimum donation of $37 is appreciated
(If you are international - please add a minimum of $40 for shipping/postage)
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
PayPal is: office@pipedoc.net
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes
C/O Pipe Doctor Plumbing
80 E Hawthorne Ave
Valley Stream, NY 11580
#USBoiler #Burnham #Steam
#hvac #hvaclife #airconditioning #hvactechnician #hvacservice #heating #hvactech #plumbing #hvacr #ac #cooling #hvacinstall #hvacrepair #heatingandcooling #construction #airconditioner #refrigeration #hvactools #hvaclove #electrician #plumber #hvaccontractor #contractor #maintenance #electrical #furnace #hvacquality #acrepair #hvacmaintenance #hvacsystem #hvachacks #service #plumbinglife #hvacproblems #ductwork #heatpump #chiller #airconditioninginstallation #ventilation #heat #hvacinstallation #plumbers #indoorairquality #heatingandairconditioning mike pipes mikey pipes hvac
Mikey - it's really great to see your son working with you & you are throwing him right into things making him work. If I may, and I hope you don't take offense to this, but make him earn it. No special treatment. You are assembling a great young team and everyone seems to have such a can-do attitude. Danielson and Peter Pan are both very pleasant humble guys, and your son I can already see is just like them. Congrats to you on 30K. Awesome to see the growth. I've been with ya since your "why pipes freeze" video 3 or so years ago. I'm really happy for your success. You put the effort in and you deserve the success. Good luck on that 50K goal my friend. Cheers!
Cherish the time you and your son spend together. Life is short and we never have enough time.
Very short. Both of my sons have passed.
What a great team, everyone brings something to the table!!! That’s speaks volumes of you Mike and how you run and respect your guys!!
He just started to respect his guys you know he was an a****** couple years ago
I see the Kid Likes what he's doing he's buying tools he's going to go a long way
This was a fun install
One time for my mans Daniel out here with the offset bends.
Let Daniel know that it’s always easier to pull the wrench towards him, instead of pushing from behind. That’s coming from a guy that was 130lbs at the age of 17 doing the same. I learned the hard way!
Working for my Dad was the hardest Man i EVER worked for, but it was worth it.
Mikey pipes is the fucking best. Always a great attitude and doesn't take shit. I like to think I'm the same way.
That's looking good Daniel on pilot TUBE
I saw Peter Pan at AF in Freeport I was going to ask for a autograph but he seemed deep in thought 🤘🏻. Keep pumping out the great videos . Oh BTW that hand truck is a back savor.
That’s awesome you and your son are working together. Two of my friends have fathers who are master plumbers and neither of them will work with their father. Funny part is that they are apprentice plumbers for other outfits. If you have the opportunity to work with your old man I wouldn’t pass up on that. That’s how generational wealth and prosperity come about. No job is going to be all sunshine and rainbows. Keep up the good work guys!
Awesome installation by an awesome crew ... Count your blessings ... Thx to your son for his service ...
It took me forever to realize that was Honeywell.
Good job on bending the gas tubing Daniel. It looks like you've been doing it for years.
You do heck of lot boilers, condensing boilers. I stick to gas furnaces and heat pumps and a lot of duct jobs. Only due couple boilers a year. Hate everyone of them. But like watching you put them in. Lol
Need to carry a 2x4 to put behind wheels to tilt back. Have to go 2 steps first. First step is for wheels. Also you need a large heavy guy at the top. Automatic heating in the Bronx, ny, Delivered thousands of boilers in 40 yrs
Good Luck to Air Force None. Ben Franklin said. He Who Hath a TRADE -Hath an Estate. Junior should realize how lucky he really is. Keep feeding us Mike. 🤙🍻🍺🙏
Looks like you have a great crew that’s not afraid to have fun on the job, love to see it!
your choking that hammer like it owes you money my guy
Thank your son for his service! From a former Navy photographer!!
Awesome seeing you and your son working together. I’ve been lucky to work with my father as well and love it. But I do want to say if you haven’t used megapress before it’s very important that when you cut the pipe it gets cut as straight as possible so it doesn’t angle itself when it’s pressed
Also important to ream and clean the iron pipe when pressing gas. A jagged cut can rip the gasket inside the fitting causing a leak even on a straight cut. Ask me how I know.
@@kotaplumbingandheating ouch haven’t had that happen to me yet. With the price of fittings I try and take no chances and clean the hell out of the pipe
Wow that is good amount for scraping a boiler. I’m a scraper in my area I love going to the scrap yard.
Nice job guys. I like that new hand truck we have a similar one it's by electro truck it's orange. On the feeder it's a good idea to set the time for a longer duration especially if your returns could be sludgy. 👍
Great video with the power mate. To show how heavy the boiler is.
Guys take advantage of everything his teaching your... i pray God for you guys not to give up. Learn and learn the trade is good, it take times but as long you stay in you would see reward throughout it. God bless you all
Daniel should get a 24” steel pipe wrench and a 3’ cheater pipe. Don’t want to break a aluminum one. Penetrating oil and heat helps on the stubborn ones.
Mikey is holding on to his life
What a great working team. 3 young men that could probably run the business one day. Congrats on 30k. 20k more to go
I always said it the tools do the work, got to have the right tools
Hello from Dublin Ireland 🙂🇮🇪☘️
Great video from the Pipe Doc Crew & like that Chris is their working w/ ya Mike (not easy working w/ family; but definitely see this working out 100%). Pretty cool to teach your son the Trade you do and pass all that knowledge down to next generation. Imagine that maybe one day Pipe Doctor business could be passed down in ur fam and could be like 5th Gen running business and so on; that’s sweet👍🏻
25:16 OMG that reflection is so great in the back window. Looks like you are backing up and going fast! Then you are looking over your shoulder like you are backing up! Bravo there sir! 😁🍺 Then it goes into a shot of you actually backing up on the next cut.
That cart is badass
Must be a big house that boiler is a monster
Love the lift. Must be 250 400 lbs. You go Mikey pipes. Love the videos
Your videos are addictive. Great content and I learn something new with each one. Thanks Mikey!
Only $98! thought I'd be more.. Top notch install..
My father in law died from mesothelioma. When he was in training to be a surgeon the hospital redid all the piping. He inhaled that for years. He (after death) won one the first asbestos cases in the nation. He died in the middle of trial. The other side tried to get it dismissed, well because the plaintiff couldn't testify. That really happened. Thankfully the judge saw it differently. Both his daughters became MD's. That stuff is no joke. He had some horrible surgeries done (whipple). He got about 5 more years after that before it was in his brain.
Thanks for showing bringing the boiler in with the powered hand truck, i was thinking about getting one. It looks scary
Awesome tool for descending stairs
Nice job Daniel on the pilot tubing!
nice pipe work Danny.
How cool is it to use the right tool for the right job
That looks great Danielson
2:19 Mikey…..you forgot us; come rescue and bring us along for that great FOOD you “dish out”😉
Wow scrap cast has some good value to it, back in my day we tore out many,many coal conversion gravity furnaces and we were lucky to get 20.00 . We used to call them octopuses and that was the worst mess to tear them out , all that crap we inhaled asbestos wrapped duct work eeeekkkkkssss ! we did not know any better. I dont know if this ever happens but please have who ever is banging on that cast to put on some safety glasses I would hate for a piece of that cast to fly off and injure one of your crew. Another good video very entertaining to watch and air force 1 fitting in well with the guys!
I bought this same cart from Canada about 6 months ago the cart alone is heavy as hell it’s a shity feeling lowering it down..it’s like 700lds lowering to a couple of guys you shit your self thinking this could kill them and the straps cam locks feel like someone hits this and it will loosen but big back saver wait till you use it on a staircase that turns
Yeah today was a fun day for me I had to teach a newbie how to sweat copper cuz he really wanted to know and I really didn't want to teach him at that point but I did anyways
Employee of the day. Hooray
I thought you were going to start doing drop headers on steam boilers? I think Pyle is a better name for Chris. Air Force None is a little over the top. Peter truly has a lot of potential, he may take a little longer to bloom but I think he will be very good. Daniel is doing quite well, he should join a gym and build up his strength. Nice install, good work guys, from the old hvac guy in Toronto 👍👍🇨🇦
All the lads are coming a long nicely Mike Great team
Wow you could have used that crane again with that beast.
Nice job
Great video as always Mike God bless you and your team and congrats to the new member of the team Chris God bless you and you will excel in this career just listen to what your dad says you’ll go far
12:09 torch heat the fitting and the pipe will nearly fall out with just the wrenches. while leverage is friend, heat is your best friend.😁
Another great video real and uncut. Good dog footage. Very nice install. Good very knowledgeable guys you have working for you. That powered lift for the stairs was very helpful. Never seen one of those before.
Crusty barnacles
Quality work Mikey you gotta teach the boys to use a piece of pipe as a extension to break the pipe lose
I use electric EMT as cheater extensions, but fence post/top rail pieces work well also and are much lighter than thick wall iron piping.
just choose the right size to fit over the handles. you'll bend or break the wrenches well before that tubing gives up and my bent 24" wrenches agree.
30k so happy for ya ! Have a great night. Ty
Awesome vid mike great too see you has a good crew working for you
definitely liking your hand truck!
Another great video. You run a pleasent work environment . Looking forward to the epic pool party. Haha Godzilla could have strapped the boiler to his back and eliminated the power hand truck
You guy’s earned your shekels today……..You know what hard work gets you? MORE hard work!😂
Always loved ❤️doing Rip-outs………took out all of my frustrations.
Nice work as always, Mikey👍
They dolly is incredible. I neeeeeeeeeeeed one
Congratulations on 30k subs brotha been here since the beginning
You need to give the other Mike a nickname lol
Mike g should be big g
it's another hand truck the name is escalera one guy bring the boiler to the baseman i have one work great check out
Nice work.
Thanks again for the videos.
🍺🍺🍺🥃🥃🏌🏻♀️🎯
Stay safe.
Retired (werk'n)keyboard super tech. Wear your safety glasses!
7:37 Keep that in mind MAX 30 PSI water and MAX 15 PSI steam is the rating on the unit. While there is safety factor built into that to go above, those aren't very high pressures if safeties fail! 😮💥 Love when they put a hot water heater T&P on.
Mcn in farmingdale has the biiiiiiiiiiig pipe vise. Things a beast for pipe upto 5 inches
Nice install. I miss the drop header like the other install had.
I replaced a WM EG11 with a Burnham IN8. Now that was oversized. :)
That’s another good one was hoping for a drop header 🤣
Hey Happy Birthday to those families. It's also my birthday. I am turning 39 this day. 1-26-22!!!
Thanks Mikey for the wishes. I hope to get half as tipsy as you do on yours.
I have. Just have to act clean around one certain person and he doesn't follow you so I know I'm ok saying this. Had one 8% alc vol at work and now working on number 3 5.5% alc vol at home. At least I didn't get drunk on the job. Loving my birthday so far. Thank you brother.
Right... I mean who counts the drinks on their own celebration?
Been here since like 2k subs, hopefully you hit 100k this year!
Mikey pipes, 👌
Heat is your friend! L.u. 85
Mikey, I think you need to mount a vise to one of your trucks that do installs or piping jobs.
Nice
You seem like a great plumber but I feel like your horns probably broke from all that tooting 😂
Nice work greatings from Bulgaria.
czcams.com/video/aCRCG2BknkU/video.html
This is my djob whith my brother
Carboard on top of the "New" boiler pleeeease..............
My best advise for you man is to learn as much you can learn ftom your Dad. And be the man that he is under God. One day for you to be onwner of the business, God bless you Mike i love your videos
A reducing 90 on the header would look better, instead of the coupling
WTH!!! Mikey... I've never seen Peter eating breakfast! That kid needs to eat!!!
8:49 teach him how to stand on the proper side when using a pipe wrench.
" what do you need a 48 for?" Because size matters!. 😁😁
That is Navian Nose Candy.
@@PipeDoctor thought you might like that
Ahhh Kroil the best penetrating oil for the big black things
Hope you told your kid the repercussions for leaving the truck door open lol
Great video
Need a 48" pipe wrench
Daniel needs to ditch the mustache lol don't put him in unmarked van 😂
Lol
If too much water is in steam boilers it comes out your radiators
Bro you got to be charging a premium to be able to afford that much manpower on the job.
Seal rings are cheep,I would have split those sections!
Split it in half bring in each piece and pull it together.
Regular tripod is my go to for breaking old piping with a 4 foot piece of 2” as a cheater
Floor vise was an amusing try but never had a chance, But great content. I almost broke a sweat watching them work.
We’ll I was close I guessed you got $95 out of that scrap 😀
Mikey pipes!
My previous employer called asbestos insulation “unidentified insulation material”
760 pounds of cast iron, my guess is $94.50 based off my local market price
Nice job! Working with the kiddo. I like. So I have to ask - why the water auto feeder?
I saw a plumber fill the pigtail with water the other day. Do you?
@@PipeDoctor czcams.com/video/U-8ZdHemY04/video.html
Mikey Plumber technicians rocking those Lets Go Brandon work shirts alright alright!! 🔥💪
Im not clear on how you moved that boiler once it hit that bottom landing - piano dolly? Daniel gonna get a hernia he keeps that up...
Hi Mikey pipes and son of pipes!