I made a stop block to set the angles on my planes n chisels , I wouldn't have thought to use my digital gauge to set it accurately . Even though I use all the time to set my table saw blade. Pure genius ( at least to my simple mind) ! Thanks for posting.
Much better than the sharpening jig that is sold commercially. The problem that these jig sharpening usually give is that the bearings when rolling through the sanding end up being sanded as well and modify the degrees of inclination. I liked the system of cutting screws aligned in the wood
There is a good reason that you have become my favorite person to look for on youtube. I wait patiently to see what you will come up with next. As in this video, you always seem to be able to take a good idea and make it great. Thank you
Nicely done! If you replace the axel with an 8mm thread, it would hold the bearings snug. Also better to hold it with nuts instead of a spring for the same reason.
The bearings used are very inexpensive (approximately $15 per 20 pieces), so if you replace the bearings only once a year, these jigs will always last a lifetime as new. To protect the diamond grit? It's about grinding heat-treated blades, but let's think about if you really need it.
Wow..so good, as we have learned to expect....I thought maybe we don't need to make one of these as you can buy them for not too much, but yours works better in keeping the iron securely (mine can move sometimes), and at 90°)...so we DO all need to make one...so get on with it you lot! 😉👍
Matias Lucena 02 de Fevereiro de 2021 aqui em João Pessoa Paraíba Brasil ativando o sino antes de ver o vídeo ,suas criações são espetaculares, é muito prazeroso assistir suas obras, e digo mais eu não entendo como é que alguém se recusa a ativar o sino, eu penso que é inveja de pessoas sem competência e hoje ganhou mais um inscrito. DEUS o nosso pai terno e eterno o abençoe.
Impresionante la maestría desarrollada y la capacidad de neutralizar a lo establecido....un gusto ver su trabajo y que lo pueda compartir con nosotros, gracias y felicidades, saludos cordiales 🖐️ desde Chile 🇨🇱
I would love to walk around your shop just to look at all the tools you have made. Great craftsmanship!
welcome
Excellent work👍👍👍 . Thanks for sharing
Some home anodising- easily done - would finish it off and keep everything nice and clean. Brilliant as ever. . .
You are an inspiration, as always.
thank you
I made a stop block to set the angles on my planes n chisels , I wouldn't have thought to use my digital gauge to set it accurately . Even though I use all the time to set my table saw blade. Pure genius ( at least to my simple mind) ! Thanks for posting.
I felt like an idiot when I saw him do that for not thinking of it myself.
Same here. Great idea
Great work like ever mr yongje
Very naic good job
Beautiful workmanship! A true craftsman 👍
You are very smart man. Thank you for sharing your talents my friend.
thank you
Looks better than the one I bought. I like the wide footprint between the two bearings
May I buy this product
Please reply
Ingenious, better than any commercial jig I have ever used.
excellent design, well done.
Without a doubt, that jig looks a thousand times better than any that you'd Purchase from a store. Amazing work sir je
I’ve been waiting for someone to do this! Thanks for breaking new ground!
Much better than the sharpening jig that is sold commercially.
The problem that these jig sharpening usually give is that the bearings when rolling through the sanding end up being sanded as well and modify the degrees of inclination.
I liked the system of cutting screws aligned in the wood
There is a good reason that you have become my favorite person to look for on youtube. I wait patiently to see what you will come up with next. As in this video, you always seem to be able to take a good idea and make it great. Thank you
Always loved that Birdseye maple plane, nice on this one.
Nicely done! If you replace the axel with an 8mm thread, it would hold the bearings snug. Also better to hold it with nuts instead of a spring for the same reason.
That works well. Thank you.
Very nice job. We featured this video in our homemade tools forum this week :)
Exceptional work. and a nice infill plane as well!
Great guide...you and the new angle guide!👍✌️😊🙏🏼
That's a good idea about the bearings I made one with bearings about 6onths ago got the bearings off Amazon 4 bearings for $8 they are so smooth.
Well made!
Maestro sus trabajos son los mejores 🌳✨
Nice! One thought, what about using a couple short pieces of heat shrink to give the bearings some protection from rolling over the diamond grit?
The bearings used are very inexpensive (approximately $15 per 20 pieces), so if you replace the bearings only once a year, these jigs will always last a lifetime as new. To protect the diamond grit? It's about grinding heat-treated blades, but let's think about if you really need it.
Interesting to note that some niche plane makers are not using a back iron, with seemingly no difference in performance.
Wow..so good, as we have learned to expect....I thought maybe we don't need to make one of these as you can buy them for not too much, but yours works better in keeping the iron securely (mine can move sometimes), and at 90°)...so we DO all need to make one...so get on with it you lot! 😉👍
Классно
Very VERY impressive! I'm in awe. Such artisanship, such craftsmanship. Beautiful.
Very nicely done!
You are an artist
Top..
Thanks for sharing that
Matias Lucena 02 de Fevereiro de 2021 aqui em João Pessoa Paraíba Brasil ativando o sino antes de ver o vídeo ,suas criações são espetaculares, é muito prazeroso assistir suas obras, e digo mais eu não entendo como é que alguém se recusa a ativar o sino, eu penso que é inveja de pessoas sem competência e hoje ganhou mais um inscrito. DEUS o nosso pai terno e eterno o abençoe.
Muy interesante alquirir conocimientos soy inventor
You are a very clever man,thank you for the video.👍👍
LOVE IT!!!!
Nice
Jewelry! Nice work 🔨
Impresionante la maestría desarrollada y la capacidad de neutralizar a lo establecido....un gusto ver su trabajo y que lo pueda compartir con nosotros, gracias y felicidades, saludos cordiales 🖐️ desde Chile 🇨🇱
Excellent!
what kind of sharpening stone did you use?🤔
I’d buy one.
Very Nice ! Greetings from the Netherlands 🇳🇱
Простая вещь, но хорошо сделана!!!
👍👍👍👍
Beautiful work, my friend! Looks and works fantastic! 😃
Really well done!!!
Stay safe there with your family! 🖖😊
Thank you and I hope you stay safe
💯👍👋✌👏
Do you sell any of your planes?
항상 잘보고 있습니다. 감사합니다 !
감사합니다~
I have the same sharpening jig and want to throw it in the trash.. I think I can make what you made.. Thank you for the idea..
👍👍👍.
Nah, I will just buy Woodpeckers
No respect for their tools - threw the honing gauge down. Give your tools to someone who respects them.
Этот китайский мусор не достоин ни какого уважения!
I’ll have the old one, I just modify the tool gripping part and she is good to go 👍
Хорошая штучка, добротная, солидная. Но зачем 90% времени смотреть как сверлят и пилят дюраль?