Metal Roof Seam leaks - This will blow your mind when you see why it leaks - Turbo Poly Seal - DIY
Vložit
- čas přidán 21. 07. 2024
- Understanding how a leak can start on a metal roof seam will help you fix it.
Watch this video On how to Repair leaks on an EPDM Rubber Roof - • Why EPDM Rubber Roofs ...
#metalroof #metalroofs
FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post.
Chapters:
0:00 Metal Roof seams
0:53 Seams are separating
1:53 Fixing Seams with Turbo Poly seal
5:25 Results after weeks
6:03 Hand Cleaner - Jak na to + styl
The “doctor “ and his wife just came to my home to look at my patio room roof leak at 9 pm after a long day of work and driving just to check out my problem. He showed me the likely problem and told how to fix it. I am truly grateful to them because the company that built the room will not even out to look at the roof!
Thanks Mr. and Mrs Doc!!
🙏🏽 Thank you. Sooo helpful. I'm currently working on this exact problem. Wasn't quite sure how to fix it properly. But now I do, thanks to you folks. 🙏🏽
Did u fix the problem. I having the same issue so I was thinking to do that
I am not sure where you are from, but the snow load here in MN can flex and crease roofs, it isn't necessarily someone stepping on it. Nicely done, this is exactly how I would fix this.
JUst a big thank you. i ran across your videos about 2 years ago. It was in November here in the midwest and i developed a leak in one of my skylights (i have 3 in the family room). i had that area of the roof reshingled due to storm damage earlier in the year. so i did not think it was due to improper flashing. Rather the skylights were 35 years old and i think the seal between the window and frame was leaking. i watched a lot of bad videos on line with methods that i thought would not work and if i hired someone they would use one of these stupid methods. Anyway i ordered the PolySeal and fleece, followed the directions and no leaks for over 2 years. For good measure i did the same treatment on the other 2 windows as well. i had a good day to do it ( 52 degrees and sunny) and it took just a couple hours over 2 days to complete. So thanks for the videos and the excellent product.
Use Super Silicone Seal on glass and plexiglass. Turbo Poly Seal will not work
Anyway, thanks for your comment
@@FlatRoofDoctor yeah i could not remember which one i used as i used all of it. i just saw the Poly Seal name and quoted that. i did use the one that was recommended for glass.
@@FlatRoofDoctor
You should say that in one of your future videos.
It is very important to know that.
Which water proofing & fibre cloth u use?
Butter and /or margerin works for removing tar from skin too and it's cheaper than special cleaners.
what is the name of the sealer you used please
Thanks
Welcome
Can I put the poly seal over the white stuff? I thought you can't do that. I have been trying to remove all the old stuff from my roof but having a problem with getting it all off.
Sir, what was the chemical that you used, is it Tar?
Good stuff
Glad you enjoyed
How many pairs of pants an jackets do you mess up 😊
No BUTYL TAPE SEAL when joining two sheets of metal together? Since you’re only lapping one ridge on each sheet this will make the roof water tight.
will this work on sealing a chimney?. our chimney is showing cracks and the flashing wasn't done the best.. can I coat the outer chimney with polyseal? will it hold up if we use the chimney??. thank you!
Yes, I have videos showing it done on chimneys - czcams.com/video/HnG7oUC6dnY/video.html
czcams.com/video/-xxbsOyv7sg/video.html
czcams.com/video/Ldp5IxUuy_U/video.html
That's it just goop it up for a few more years if your lucky.
How would you like to come and fix my roof and do a video on that it's a very low slope metal roof on a concrete building with no edging around the edges of it and it leaks I'm in Iowa though
Iowa? slightly out of my way. I am going to Massachusetts soon and that is a 10 hour drive 1 way
Well it was worth a shot thanks 👍
Ever find that cap??
yes, my wife went to get it
😆😆😆
Dropped the cap
My wife did find it later lol I knew someone would comment on that
@@FlatRoofDoctor Always enjoy your videos!
I could imagine condensation could gather on the inside of these metal roofs frequently and of course run down to a low point , leading to anyone believing there is a leak or worse still poor workmanship.
Is that a South African accent I detect?😉
He’s a jealous man
Hmm, I don't get the statement? I am not to smart to understand. Please explain. I would love to learn
What is the black glue, doctor? What is the components?