Rig Welders - Techniques for Stick Welding
Vložit
- čas přidán 21. 07. 2019
- Pepé is a rig welder from Houston Texas and he is going to be showing us how he welds a 12" bell hole with a 6010 root 8010 fill and cap downhill. Joining him is South Coasts one and only Abe with former South Coast student Victor and Pepés right hand man Daniel! Its hot out here in Texas so lets get to it!
________________________________________________________
WELDING SCHOOL: www.scweldingacademy.com
INSTAGRAM: / southcoastweldingacademy
FACEBOOK: / southcoastweldingacademy
________________________________________________________
TOOLS, EQUIPMENT WE USE & RECOMMEND:
★AMAZON: www.amazon.com/shop/weldtube
★OUTLAW LEATHER: outlawleatherusa.com
★HEAVY HITTERS TIG RIGS: heavyhitterstigrigs.com
★ABICOR BINZEL: binzel-abicor.com
★TILLMAN GLOVES: jtillman.com
________________________________________________________ - Jak na to + styl
👇WeldTube Store👇
www.weldlife.com
Awesome work guys! Loving the collab vids
@@weldtube our pleasure. Keep up the good work
Happy to see that el Pepe finally learned how to weld lol
Nice setup and Great job guys!
I like how dude gets mad at his helper for doing what he wants him to do on the heat 😂
Thanks so much... you guys rock and really give a great presentation.....don't stop showing your craftsmanship and dedication.... PB
The SA-200 is the perfect downhill machine especially the model with the arc control you really can just hold the rod in the grove and it lays down like butter on a biscuit !!!!! The miller is ok but the puddle stays to wet when capping the amperage stays to consistent even when you long arc so you’ll get a lot more undercut, the Lincoln has a much more stable current and you can control your amps by decreasing or increasing arc length to the base metal which makes it easier to stack dimes on the bottom without leaving undercut!!!!!!!! These boys are jam-up hands I love to see our craft done right by real welders most of these guys on CZcams are just test lab welders !!!!!!
I hope you are being sarcastic about the miller being to consistant. If anything miller has a "more stable arc". Plus I have never seen any 200 that's original that has arc control. Besides the 200d
Finally a big blue 300 in a vid been wanting to see if there was a big difference from a “pipe pro “ and a “big blue”
I’d like to see this stuff get x-rayed and interpreted to a pipeline code
Beautiful welds good work guys!
I see the complete weld joint and enjoyed you Did great job super.
Amazing vídeo!!
Great men and great work quality.
THANKS Y'ALL MASTERS FOR THE AWESOME WELDING!! I'M A MASTER TO PIPE IS FUN!! THIS WHY WE GO WORK .
Thank you guys! Great video
Excellent job and teamwork! 🙏
As a newby, that is some of the clearest weld puddle camera work I`ve seen.
peep weldingtipsandtricks hes got good puddle shots
Thanks for the content!
merci pour la vidéo vraiment sa motive
Good job.In Finland downhill welding is not permitted method high pressure pipes or load bearing structures
Amazing both of us making welding pipi.. good job idol.. watching from tramo pasay city Philippines
Good job guys
Love too see my peeps welding bad azz💥
When is that pancake coming out? Hope they have designs like the rest of there stuff
Thanks fellas, really nice job. Next time if you please, can you show a little bit more back and forth SA 200 vs Miller. Like have an SA 200 man demonstrate what so great about SA 200 and and the Miller man demonstrate what he likes about the arc and welding capabilities of the Miller. I know they're both great machines, I just want to see / hear why so many especially pipeline welders gravitate to that old iron. Thanks again
Nice video demo. Could you please do a video demo on 2 inch sch 120 carbon pipe using 309 stick electrode for fill and cap tig 309 root hot pass?
Thanks a lot guys
That was a great Bideo guys 👍👍
Old welders use to tell up & coming welders that if they showed up on a jobsite with a Miller, they'd b "run off the jobsite." Obviously no longer these days. Whichever & whatever works!
Nowadays its "if it doesn't use diesel, get out of here" lol
Dumbest shit ever, Miller welders are way ahead of Lincoln by along shot. Best example is the Miller Pipeworx 400, it’s a 4 phase (Stick, TIG, MIG, and Flux Core) machine and it runs fucking great. Lincoln can’t figure out how they got all 4 of them to run so great, they could only make a 3 phase machine
In just trying to get a job as an apprentice over here, and y’all talking about who’s better and what not, on-a serious note, where does one apply at? I’d like to get on.
Ar1240 Ch go to your Local Union Hall and ask the coordinator for an application
Clifton Williams thanks bud, Collision tech 16 years and going, mig and aluminum certified, I think I like to try something else, bud I’ll definitely go check that out. Thank you
Muy buen video y exelente tomas! Que cámara y lente usaron???? Saludos desde Argentina!
Pepe,.I hope to meet you in the field one day when I finally break out.
I died when he asked for the hammer and said “it should be done in there”. When i was helping that line would piss me tf off let me tell ya 🤣 brought back memories when i heard that
Somewhere in there*. Auto correct
outstanding. period.
All new equipments, new glove, new hood, new shirt ,new shorts, new stingers haha
SA 200 is a freaking classic, love the sound, But Miller PP400 with a Cat is the cats pajamas.
Primo them shirts, where you get them from.
Beautiful
So why weren’t the grounds on the end of the pipe and why did Abraham have the clamp handle in his face taking the top?
What amps y’all use for the toot
Who makes that grasshopper? Like that one
BRAVO !!!!!!
Terimakasih, video sangat membantu saya dalam belajar
Thanks ❤❤❤
What stick welding rods are there
i like your helmet boss..can i buy that one too?where?
Buenas noche, ustedes no podrán poner subtitulada en español,hay parte que le entiendo
Fantastic job gentleman 👏👍!!
Can we see more of the bottom side
love the way you ground the welders
Grasshoppers Baby!
Is the grasshopper in the bevel to prevent grounding marks on the face of the pipe?
Daniel Rodriguez yes!
Fresh video an thanks for the tips I just passed my union pipe test #navajonation
They call me Pé-pé 🥺💜
I love your video. Pls try doing aluminum. I want to see aluminum pipe being welded.
Showing love for Whistle Stop Leather Shop.
Carallo..!.
.sois unos fenomenos....!
..sl2 desde Galicia - España🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸
I would like to work there.
Nice work guys. Greetings from Germany. ⚡👍🏻
5:06 - 5/32 6010 at 35amps....45-50amps 5/32 8010?? Maybe 35 - 50 on the remote. Nice job - nice machines - nice welds
Thought the same thing
How can you run that low? Is it the gap? What do you mean remote? I'm a Tig welder learning stick.
@@tapllarrow3984 the dial goes from 0 to 100, if you have your machine set at 160 amps then 100 is 160..the remotes are convenient so you don't have to run back and forth to the machine constantly
Those amps are NOT accurate!!! That’s what the remote is set at....not the amperage.
5/32 at 40 amps???? Never
What their right hand doing one this video 😁
ใช้ไฟเเรงป่าวคับบ
SWEET!
Excelente tutorial. Saludos desde Guatemala 😁😁👏👏😁👍🇬🇹🇬🇹
Top Notch
Pepe seems like a cool guy to work with or for
One dumb question: Why don't you use automatic helmets?? Are they too clumsy or what?
Now let perform visual & phased array exam and see. Lol. Jp I'm sure all is good!
Muy bien..saludos desde Ecuador
Thanks. You guys can weld good, some audio problems when welding couldn't hear what he's saying. Great content, always appreciated
I need to get into a pipe job someone help plz
What is the rig on the top of the pipe called, not the clamp. and how does it mount
Jeff Schmit it's the ground clams and mounts with magnets
Jeff Schmit the other fixture holds their grinder and wire wheel and also uses magnets
@@mattharper588 I thought it had the work clamps on it but wasn't sure. Pretty cool fixture
Called a grasshopper, keeps the work lead in the Grove so no ground arc strikes outside of weld arra
What type of welding lens do you recommend?? I use a #10 but i have to grind a line before capping because if i dont i'll get lost and my cap comes out crooked..
Taylor Sanchez lol ur blind. J/k j/k switch to a 9 and roll with that
@@davidmartin2231 hehehe i dont have any trouble when i weld uphill with 7018 or when i weld tig..
Taylor Sanchez do you Stare at the “light”? Cause that may be throwing you off. I like to follow the rod as I travel. I’ll look forward, the bevel, how it’s stacking in the back, the other bevel, and right back to where I started. If that makes sense.
@@davidmartin2231 yea i see what you mean.. when i do one bead cap i dont have trouble its when i do several bead cap.. just that first bead after that i can see pretty good..
Some dudes outhere have a wenz lens they recommend it but its kind of pricy
I wish I could have one day with you showing me hands on
Good
That was done damn nice welding looked good. 👍👍
PEPE KNOWS!! good job bro..you don't use one motion all the time you use what's working right now, circles, whipping, side to side, whip and side to side etc....
Does the hood give you decent protection? Itd intresting, great job and presentsion keep buring rods men!
Michael Coriglianol actually yes. Pancakes block out all the back light that you get a pipeliner. So yeah it’s better for your eyes
Shoutout to all my paisas, made the video 10x better lmao
Shot all them sparks at the truck lol
Saya suka sama kap las nya
it was +26 C today in Canada and I barely made it through the day, whats the daytime temp in Texas
Impecable 👍
The grinder holders and ground holders are dope does anyone know the brand of them ????
Where do I get on pipeline ?? 🤙
Salisbury construction.....3S services....stop anywelder in Carlsbad or Hobbs. M
I am welder i want opportunity
Chulada
Nunca e trabajado con los pipeliners yo soy pipe welder y no hago down hill
Yo hago puro up hill mi root pass
Me gustaría calarme con un pipeliner para ver cuál sale mejor el down hill y yo up hill
Hey WeldTube Family, how about doing a video on Pulse Mig in various positions......
What brand of electrodes are they using in the video?
WeldTube Thanks
That red face definitely stacks more metal than any miller out there .
Good welding men and nice welders
Were can I get one of those jackets?
So were can I buy one of those jackets?
I was talking about the welding jackets .
delis padilla no one is wearing a jacket my guy it’s summer time in Texas,,those are wrangler pearl snaps,,,extra heavy on the starch the Texas welder way the only way
Mi brother mogollón..caminalooo..
Local 100 but wanna go to the 798
hillrabbit 798 oh ya Ima stay and turn out then after go when there is work
Abraham looks like he’s wearing a bald cap
Why you welding 5g down
That Sa puddle looks wettt
How the fuck do you weld 5/32 at 40 amps
Who parked their rig next to the weld?🤦🏾♂️
New T300’s, new gloves, new pipe jacks, and new hood🤔
I was thinking the same thing. Why is everything brand new? Even the grinders. 🤔
They bought everything to shoot the videos. I do not even know what is your stupid question.
I get that they bought everything for the video. The question is why? If you do this day in and day out you should have everything. They dont go out and buy new for every job right.
Chris WOOD it’s a school Chris. They have bags and bags of new stuff to work with. Also this is the first video where they shoot pipeline weld outside.
Fun to see how many americans u need to weld a pipe. In Europa that is a one man jobb.
That’s why USA is the number 1 all the way baby. 😘
Enséñame a soldar amigo soy de Argentina puedo viajar a norteamérica para aprender
Top 👏👏