The acrylic deck board is so securely mounted on the scooter with two screws on the front and two screws on back top side of the deck. Those screws have to be removed first. After that it was easy to remove the thin metal deck cover. Just pry it out using a flat head screw driver. It was glued, but not hard to remove the cover.. As for your Q08 model mudguard, try contacting the seller you got the scooter from. You got it from Aliexpress right? Chatting with them on the message board works great.. or you can search for mudguard at Aliexpress.
I have a Fieabor Q08p. I’ve had it 9 days I’m already getting controller failure. The Amazon seller won’t help. I have no idea what to do. - the rear motor doesn’t spin.
Hi, I got it from PhoebEVPartsTols store at AliExpress. They sell high voltage high current controllers and are quite specialized in this area as they do configuration/programming of the controller to meet your needs (if applicable). They charge a bit more but those guys know what they are doing and also help you get the right parts for what your battery can handle. I would recommend going a single motor, RWD instead of going with dual motor dual controllers as dual controllers in general cause the motors to get damaged (lead to failure) due to sudden voltage spikes from unbalanced unstable power delivery between two controllers. It's better to go with one big controller using the rear motor.. Sadly most batteries out there don't have enough power delivery as they lack in amp discharge. Need really good batteries. With Samsung 40T cells you can go insanely fast with just 50A going to a single drive, 60- 70 mph easily.
Hello. Do you have the scooter manufacturer original electric diagram with all the wires connections (with the colors of the wires)?? If yes, can you share it with me, please?? I can’t find it in the internet. Thanks in advance
@@YTHaydenRoush I did that and they won't give it to me. I just bought one but the connectors are disconnected. If you have it and could send it to me would be greatly appreciated!
You'll have to use a box cutter blade to cut the plastic covering of the battery. It's pretty easy to open but very dangerous.. you don't want battery wires touching any metal surface and also the batteries inside which can get shorted. I have a video about this battery showing the inside of it and what power (amperage) it's putting out. It's this video here -> czcams.com/video/IxE-r_Psyu0/video.html
Hi, why do you think the controllers are 35 amp? From what I've read they're 45 amp. All these cheap scooters seem to be using the same controllers. Thank you I just wanted to clarify why you think they're less powerful than advertised.
Hi. The actual controller says 35A. I also asked the seller about the controller before I bought the scooter and they said 35A😁 Some scooters are underpowered...much lower wattage than they advertise. This scooter doesn't put out 5600w of power...more like 2400w.
Not only are the controllers so small in power but the battery is even more severely limited in power so you can't even get all out of the 35A controllers. I have a new video coming tomorrow on the detail of what battery this scooter has and how to build or modify this battery to get more power. Stay tuned.🙂
Did you already buy the scooter? If so, if you want descent power (5600 watt or higher) you will have up upgrade both the battery and the controllers....More and more places from aliexpress are using smaller controllers now so they gonna be underpowered. Ask the seller what amp the controller puts out and also ask what amperage discharge the battery has. You might have to ask for their engineers to answer these questions.
Jesus didn't tell him to buy it, but he's definitely protecting him while he rides it!! I used to have a fieabor 5600 w, and between how quick it was and the strength of the e-brake it wanted and tried to kill me.... Now I have a t88 Plus 5600 w scooter, the e-brake doesn't come on near as hard, but only has a 37 amp rear controller so it's kind of slower, but has still tried to kill me... These are basically electric motorcycles that look like scooters! Be careful on public roads and expect that people will think that you're only going 15-18mph like the rental scooters. Even in traffic going the speed limit with bright ass headlights, definitely assume they can't see you.
Well the battery pack only puts out around 22A... The controllers are dual 35A, but limited by battery's 22A. To really go fast you'll have to build the battery pack yourself using Samsung 40T 21700 cells that'll get you 240A... of headroom. Slap a 50A Sinewave controller and just run rear wheel drive off that (no motor on the front). That'll get you over 60 mph, even 70 mph.
@@pertandos This scooter is crap... Not only are the controllers tiny (only pulling 35A each) but the battery is tiny also, there is very little amperage available it only puts out 22A continuous and 64A maximum peak power. With your body weight you might be able to hit 35 mph GPS... The motors are good though they are genuine 2800w motor each and are tubeless-ready. I got the controller + throttle display combo from this seller - a.aliexpress.com/_mPQK0H9 It's the one with 24 mosfets, the largest one. I got this a year ago and is reliable, as it's built like a tank, a lot of cooling and better quality components inside. This prevents electrical failure... it is the stock controllers that the scooter manufacturers throw in there are not reliable. The low amp rated ones aren't so bad due to less heat and current to deal with, but the higher output stock controllers are more risky.... That seller I linked above is good, they sell controllers that work well with the electric scooters. Because the battery is so small you need to upgrade the battery as well...without it, upgrading the controller won't really gain much in power especially the top end.
How did you melt the lock tight off the scooter board to go inside? Also I broke the mudguard on my Fieabor Q08. Where can I get a replacement?
The acrylic deck board is so securely mounted on the scooter with two screws on the front and two screws on back top side of the deck. Those screws have to be removed first. After that it was easy to remove the thin metal deck cover. Just pry it out using a flat head screw driver. It was glued, but not hard to remove the cover..
As for your Q08 model mudguard, try contacting the seller you got the scooter from. You got it from Aliexpress right? Chatting with them on the message board works great.. or you can search for mudguard at Aliexpress.
hi, I got a damaged left turn signal, do you have the specifications of the light? I want to buy it, thank you
You mean my Meilan X5 taillight? Yeah it's this one here - www.amazon.com/gp/aw/d/B075PYDN5V?psc=1&ref=ppx_pop_mob_b_asin_title
It has specs and all
I have a Fieabor Q08p. I’ve had it 9 days I’m already getting controller failure. The Amazon seller won’t help. I have no idea what to do. - the rear motor doesn’t spin.
What did you end up doing? I have the same problem
@@TNPolaris you fix it? I have the same problem when I press the accelerator the rear wheel jerks.😑
Can I upgrade my 35a to 45a? Same wires?
yes
which wire is to disconnect speed limiter?
DId you ever figure it out
@@TNPolaris did not sadly
It's in the throttle
Hey, where did you buy the upgrade controllers from??
Hi, I got it from PhoebEVPartsTols store at AliExpress. They sell high voltage high current controllers and are quite specialized in this area as they do configuration/programming of the controller to meet your needs (if applicable). They charge a bit more but those guys know what they are doing and also help you get the right parts for what your battery can handle. I would recommend going a single motor, RWD instead of going with dual motor dual controllers as dual controllers in general cause the motors to get damaged (lead to failure) due to sudden voltage spikes from unbalanced unstable power delivery between two controllers. It's better to go with one big controller using the rear motor.. Sadly most batteries out there don't have enough power delivery as they lack in amp discharge. Need really good batteries. With Samsung 40T cells you can go insanely fast with just 50A going to a single drive, 60- 70 mph easily.
Hello. Do you have the scooter manufacturer original electric diagram with all the wires connections (with the colors of the wires)??
If yes, can you share it with me, please??
I can’t find it in the internet.
Thanks in advance
Go on fieabor website and contact them on WhatsApp they can give it to you
@@YTHaydenRoush I did that and they won't give it to me. I just bought one but the connectors are disconnected. If you have it and could send it to me would be greatly appreciated!
How do you open the battery
You'll have to use a box cutter blade to cut the plastic covering of the battery. It's pretty easy to open but very dangerous.. you don't want battery wires touching any metal surface and also the batteries inside which can get shorted. I have a video about this battery showing the inside of it and what power (amperage) it's putting out. It's this video here -> czcams.com/video/IxE-r_Psyu0/video.html
Hi, why do you think the controllers are 35 amp? From what I've read they're 45 amp. All these cheap scooters seem to be using the same controllers. Thank you I just wanted to clarify why you think they're less powerful than advertised.
Hi. The actual controller says 35A. I also asked the seller about the controller before I bought the scooter and they said 35A😁 Some scooters are underpowered...much lower wattage than they advertise. This scooter doesn't put out 5600w of power...more like 2400w.
Not only are the controllers so small in power but the battery is even more severely limited in power so you can't even get all out of the 35A controllers. I have a new video coming tomorrow on the detail of what battery this scooter has and how to build or modify this battery to get more power. Stay tuned.🙂
Did you already buy the scooter? If so, if you want descent power (5600 watt or higher) you will have up upgrade both the battery and the controllers....More and more places from aliexpress are using smaller controllers now so they gonna be underpowered. Ask the seller what amp the controller puts out and also ask what amperage discharge the battery has. You might have to ask for their engineers to answer these questions.
How did you open that?
remove the nonslip mat. You will see the bolts to unscrew
How did jesus tell you to buy a eletric scooter....
Jesus didn't tell him to buy it, but he's definitely protecting him while he rides it!! I used to have a fieabor 5600 w, and between how quick it was and the strength of the e-brake it wanted and tried to kill me.... Now I have a t88 Plus 5600 w scooter, the e-brake doesn't come on near as hard, but only has a 37 amp rear controller so it's kind of slower, but has still tried to kill me... These are basically electric motorcycles that look like scooters! Be careful on public roads and expect that people will think that you're only going 15-18mph like the rental scooters. Even in traffic going the speed limit with bright ass headlights, definitely assume they can't see you.
2:23
Brand new fieabor 5600w first day experience.. dies at 37mph. Re-tested dies at 37mph. What a trash scooter.
Well the battery pack only puts out around 22A... The controllers are dual 35A, but limited by battery's 22A. To really go fast you'll have to build the battery pack yourself using Samsung 40T 21700 cells that'll get you 240A... of headroom. Slap a 50A Sinewave controller and just run rear wheel drive off that (no motor on the front). That'll get you over 60 mph, even 70 mph.
Hello there im thinking of buying this scooter whould you mind giving me your insta so we can talk there?
Hi, I don't have Instagram account just youtube. We can chat here if you'd like.🙂
@@noobz5056 what is the max speed with road tyres you can reach with this scooter?I'm 85 kg
@@noobz5056 also how much did the new controllers cost you.And is there any risk of burning or braking something with the upgraded controllers
@@pertandos This scooter is crap... Not only are the controllers tiny (only pulling 35A each) but the battery is tiny also, there is very little amperage available it only puts out 22A continuous and 64A maximum peak power. With your body weight you might be able to hit 35 mph GPS... The motors are good though they are genuine 2800w motor each and are tubeless-ready. I got the controller + throttle display combo from this seller -
a.aliexpress.com/_mPQK0H9
It's the one with 24 mosfets, the largest one. I got this a year ago and is reliable, as it's built like a tank, a lot of cooling and better quality components inside. This prevents electrical failure... it is the stock controllers that the scooter manufacturers throw in there are not reliable. The low amp rated ones aren't so bad due to less heat and current to deal with, but the higher output stock controllers are more risky.... That seller I linked above is good, they sell controllers that work well with the electric scooters. Because the battery is so small you need to upgrade the battery as well...without it, upgrading the controller won't really gain much in power especially the top end.
@@noobz5056 so how much will it cost to upgrade battery and controller?