Hub bearing assembly replacement 2003 Dodge Ram 1500

This is my successful attempt at replacing the hub bearing assembly on a 2003 Dodge Ram 1500 2WD. You should always get your vehicle serviced by a certified mechanic if you can. Results are not guaranteed and working on your car yourself is at your own risk. Good luck.

[@spelunkerd]

This is not easy without a long stroke air hammer, a hub buster, axle kit or a hub grappler. Good job! One think I found useful was to thread the three bolts in a little way and tap on the heads of the bolts, protected by a socket you don't mind pounding on. Once it moves a little, penetrating oil can get in there. Remember to smear a little antiseize onto the contact surface, to help out the next guy.

[@robertcrittenden497]

I saw where a guy used a grease insert. In place of the abs line. So you can have a grease insert. Because dodge made them without grease inserts.

[@JacksonGuitarsPlayer03]

If you remove your hub you can get yer CV axles in and out you wouldn’t have to remove ball joints make it all dangle and possibly screw up alignment

[@CarlosHernandez-bp4ul]

Dr.pepper or beer? No pos beer!

[@shaunnorth1578]

How did you not show the axle removal?? That’s the important part

[@jonjanssen2687]

If u could hold the camera still, it would be helpful. Otherwise can't watch, motion sickness occurs.