Suzuki Swift 1.3 8v - 108Hp - Walkaround, Launch control, Pops&Bangs
Vložit
- čas přidán 13. 10. 2023
- Hi guys! This time I'd like to show around my '95 Suzuki Swift, hope you all like it! If you have any questions, let me know! Cheers.
Engine specs:
- 1.3 8valve G13BA engine, original block
- Compression ratio: 11.3:1
- Bore: 75mm
- Stroke: 77mm
- 1360ccm
- Engine head: 1.6 vitara, ported
- Steel, layered headgasket
- 280/280 Szuromi Camshaft
- Suzuki Baleno MPFI intake manifold, custom made to the head
- Nissan SR20 Throttlebody 60mm
- Engine management: Megasquirt MS2 v3, programmed by Radics1 Racing
- GTi oil pump
- Fuel pump running arund 3.5 bar
- Exhaust: 4-2-1 manifold, 50mm straight pipe with one muffler at the back - Auta a dopravní prostředky
Ejj b+, ez nagyon szépen szól :) Végre valaki nem csak a kínai gt27 eket aggatja. Turbóst mindenki tud építeni, még a hülyék is :D
Főleg H kínai 28😂
Now this I like! It's so different, and still very high quality nice build. And it sounds amazing! 😊
probably the coolest, most fun 108hp ive seen
Hát én igaz nem nézem sose semmibe a swifteket de ez gyhaa ez nagyon fasza lett 😮
I like how massive that throttle body is for such a small car! Super cool
I was expecting this from a GTI, but out of a wheezy 8V? Well done!
Proof that you can make anything fun and cool if you know what you're doing.
Cleanest build I've seen in a while. Sick!
Wow, I never thought I would like a suzuki swift this much. What an awesome build!
K.rva jó lett, hatalmas pacsi!😀👍
what a nice build. good craftsmanship too. everything looks put together with much care and know-how. thanks for sharing. really enjoyed the view of the engine bay. so clean.
what a happy little engine id LOVE to give that girl a good drive and hear the scream all the way to that hundred hourses! man these cars are the greatest, it doesnt matter to be fast, what matters is the memories you make with them
I know that car, but this has to be the coolest version of it that I've seen. :)
Nice ride!
Love the car Looks awesome en sounds great
Pretty nice torque from 1.3L engine, I wonder how much gains there are from raising the compression ratio if possible. Being naturally aspirated and tuned 8 valve engine in such lightweight car is pretty fun
Hi! Thanks! I don’t think raising just the compression ratio gives you a lot of power. Because the same amount of air travels through your engine. Sure it gives you a little, if your engine is a bit worn..
@@domi.markushigher compression will allow bigger cams with more lift and duration and thus allow you to rev higher. All high revving powerful NA engines have high compression.
@@EstrogenGhoul yes I know, I made a high compression too because of 280/280 higher lift cams. But this question was related to rasing just the compression
Depends on engine, if theres like 8:1 stock ratio and u raise it a lot and tune u should gain noticable power with just that, ofc if stock compression is high then small change won't be a lot.
Have seen someone do that from around 8 to 11 in old motorcycle and gained couple % of power (mesured on dyno) not remember exact hp numbers
What turbo did you use ?
beautiful little car,
runs awesome an sounds so so good !
Really nice video! I love it!! RESPEKT!!!
That is some nice car man, I have a swift aswell, wanting to up the power some day, great vid!
Such a nice build! The dyno graphs are insane !! Gti power with more torque, and peak tq from 2500 to 6000 is wild !! Great job !!
Thank you very much! I aimed for a balanced curve! Hope it will get better soon. Cheers
Igazán szép, letisztult építés. Nagyon tetszik hogy a 8V motorból hoztad ki ezt a teljesítményt.
Szép munka!
Koszi szepen!
This is clean tunner well done ❤
thats a seriously cool car so clean too
These cars are absolutely amazing. They are pretty cheap to buy, run, and give you loads of fun! Soon they will be turning heads also, cause they will be quite rare in non rusted out states
Also pretty dangerous to run them with today's land whale SUVs. Just something to keep in mind, but there's little in the way of frontal or side protection. Some do have airbags, but other than that you have no modern safety features and the lightweight means your vehicle will be the one sustaining most of the damage. For a track car these would be fun still, but they are only slightly better than a kei car. Finding one without rust will also be a huge challenge. In our family we've had two of these with almost 600k miles traveled. Amazing little machines - 60hp doesn't go far fast, but it does do it reliably.
Jól megy! De ismerős helyszín, ez a 85-ön van Kóny mellett. 😀
Ennek a Szuzinak küldök egy puszit ❤ Komolyan bejön, rohadt jó lett!
This type of swift was my first car, and my first ever love. I had a 2002 model, and now I own a 2012 Suzuki swift. But I can help but to think back about my 2002 model with great joy, even stock just a fun little reliable car that doesn't shy away from hard work. I had it all stock, and always wondered what you could do with it. So seeing this is great, I love swifts and if I ever have a ton of money to spare I will get another 2002 swift and make sure it doesn't disappear from the streets.
Congratz man,what a lovely pocket rocket car eventhou without g13b 16v inside ,👍💪🏼
Pure fun!! Love builds like this, and the sound is just awesome!
Nagyon Brutális Gratulálok
Szeretem! Szívó,szép a görbe,le is van mérve és nem be érezve ahogy másoknàl és végre nem egy billegős tucat pd füsttel🙏!
Nagyon komoly igazi sleeper! Gratulálok!
Szép autó srácok, minden elismerésem!😄
Szép/nagyon jó hangú gép💪🔥
that sounds amazing
Very nice project.
Nightride sticker! Greetings from Poland man
This was my dad's first car he buyed we have lots of memmories of it. Was such a fun car to be in
This is so cool ❤
That thing is lovely.
Nice build. 👏
Ah teso iszonyat jó lett!:D az egyik álomom ott van a kezedben egy jó Kis szolidan tuningolt swift!:D ah tökéletes!:)
what a beast
Fasza kis gép lett! :D
This, I love.
Nagyon király kis "szappanos doboz", sok sok balesetmentes kilómétert vele :)
you got my like for NIGHTRIDE sticker, love from Poland! Hungarian brother!
🙏🏻 Polak, Wegier, dwa bratanki
Jézus, bitang egy gép😍😍
wow thats super nice
Crazy Build
Sounds pretty nice for a 1.3 8v intake and exhaust
sick car man
Méghogy a szívómotort nem lehet tuningolni....
Igaz, hogy gazdasági csőd, na de akkor is!
Nagyon jó lett! Gratulálok!
One cool little car that and soaunds awesome 👌
It is amazing, I figured it was going to be turbocharged, but all motor is nuts!
I am curious why you stuck with the 8 valve head, for the challenge?
Thanks! Yes, I was curious, how much can achieved with an 8 valve configuration, but with a well balanced power and tourqe curve. As you can see, it is not an all out racing engine, so you can use it as a daily car easily. (But more ideas - with hopefully more power - are coming soon).
@@domi.markus Awesome!
Itt is le a kalappal, fasza lett!
Lovely car 👍
nice build
it remainds me my justy before the swap, kinda nostalgic
Please make some more videos this is a awesome build!!!
I will, when I have enough content for it :) thanks btw
Gyerekkori álmom egy ilyen 😍
Very nice sleeper
Marha jol nez ki, es nagyon durva elmeny lehet vele jarni, grat hozza, szep munka🤌🏽💪🏽❤️
Kibaszott jó gép!
Hogy harap, nagyon fajin!
Esa Suzuki esta linda Dios te la bendiga
💙 Suzy Blue
Gyerekek ez hogy szól már :D kurva jó!
Nice
Azta egy ilyen volt tinikorom álma :D Nagyon rendben van a gép, és külön tetszett, hogy nem bemondásra van a teljesítmény, hanem kiraktad a mérési eredményeket is! Amúgy én nagyon csípem a 8 szelepes motorok nyomatékgörbéit, a tiedét nézegettem, és lenyűgöz, marha jó lehet vele menni!
Nagyon koszi! Orulok, hogy tetszett! :)
Nice build i like how the car looks inside and out especially the exterior looks decent one thing i was wondering why didn't you switch to a G13BB 16 VALVE head im sure you can get more power out of this setup with that head if you do some porting work on it none other then less car sounds great aswell keep it up man
Hi! Thank you! I stayed with the 8 valve config led by curiosity. Yes, the 16 valve would make much more power, because a lot more air flows through the head. For the next engine I’d like to build a 16 valve sohc, hopefully reach 130hp.
@@domi.markus nice looking forward to a 16 VALVE build future videos keep it up would love to see what kinda power it can make good luck 🤞
Yes yes yes 😮👍👍👍👍 saludos chile
Nagyon büntet eszméletlenül duruzsol. Pacsi.
o kurwa, ale zajebista fura! xD
Ezzel pikk pakk kint van a pizza a címen és meg telefonálni se kell ha megérkezel.😅
Paraszt nagyon ;)
Eso ta nuevo y lindo ❤😍
Nice car... ❤ from indonesia
Pfhuuu de kakas😍
Even better then before !! For me best looking Swift , clean lines , everithing is made with lot of taste , the color is ideal .
Increíble
Aztarohadt, burtálisan szép lett és a hangja is nagyon jó lett. Lehetne a jövőben egy videó arról, hogy mit kapott eddig a kocsi és hogy még mi vár rá vagy mik a tervek vele ezek után (csak egy ötlet).
Koszi szepen! Jo otlet, gondolkozom rajta, bar nem tudom mennyire erdekelne az embereket, ha beszelnek, ahelyett, hogy a megvalositott otleteket mutatnam be.
de vagány! nincs tul tolva nekem ez nagyon bejön :D
Niceee
Ahh, gyönyörű
Cool car !!! you should had a resonator to the exhaust line!!!
もう10年以上前の話だけど中学生の頃この先生に教わってたんよ
技術教科担当の大柄で人当たりが良い先生だったな
事件の事、実家にいる母親から電話で聞いて本当に驚いた😳
俺が教わってた頃既に50代とかなのに、60代になっても命懸けで生徒を庇うなんて、、、本当に無事で良かった😌
nagyon szép
Akarok egy ilyet én is építeni 😍😍
this is why N/A is the best
pretty
one of my first cars, kept me spinning during rain for ages 🤣 easily hit 8500 rpm
New subscriber btw, im begging you please to do a video on how you make it pop and bang 🥺🙏🙏
Hi! Thanks for the subscribe! It has an aftermarket megasquirt ms2 v3 ecu. It has built in launch control mode, and a switchable pops and bangs program mode. For the pops&bangs it basically just sets the ignition timing to 0 degree above 2500 rpm at 0% throttle. This makes the pops and bangs. For the launch control, it cuts the ignition at 4000rpm, so it does not rev higher, so it makes also flames in the exhaust. You can change the rpm, and how fast you want to cut the rpms. I have built in a clutch pedal switch, that way I can flatshift too. All these things can be simply turned off by an “on/off” switch.
how can't u fall in love in this car in 1sec?
nyomdnekiiiii :D azazaaaaaz had menjen jó járgány :D
brutális gép
Shqoda Splendid
Aston-Martin Fantastic
Taylor swift approved!
DMV (or NKH :P) likes this :D
Got the burble tune
Nagyon pacek! 🫠
Program van rajta vagy talán maxxecu? Lehet tudni egy konfigot ? 😀😀
Szia! Koszonom szepen! Mindent leirtam a video leirasaban ✌️
Hello, I would like to use such a thing for me and if I can see correctly, the collector is from Suzuki Baleno and how does it look in terms of the engine bundle and the computer itself?
Hi! If you mean intake manifold by the collector, yes, it is from a Baleno. The engine harness and the ECU from a Baleno too. But harness was pinned out to match the dashboard and enginebay harness. It ran with a stock Baleno ECU for a half year, after it got a Megasquirt ms2