So, old sewist here. Way back in high school sewing class in the 70s we were taught that cloth measuring tape was notoriously inaccurate. For one, they stretch out. Teacher said to keep an accurate metal ruler on hand to measure new and old tapes against to make sure they were accurate. Here we are, decades later and in the next century, and I still have a metal ruler on hand. More than one, really. One in my craft room, one in my toolbox, and one in the kitchen. When I saw you pull out that cloth measuring tape I thought, “Uh oh!” Sorry you wasted all that time and material but those boxes got used anyway. I love your channel. I learn so much even if I never use it. It’s useful to know about it. I’d really love to do some 3-D printing someday but don’t know anyone with one….yet. Well done!
Just get a cheap Ender 3 v3 (ke/se) they're great for Starters and pretty cheap compared to Bambus (Sure Not as polished but hey the lay down plastic pretty well)
@@JanSt12for anyone getting into the hobby I usually recommend the A1 mini it's not much more expensive and can save lots of frustration. I have a ender 5 pro and love it but if I was buying today would definitely get a bambu
If you're in the US, try contacting your local library system! Even if they don't have 3d printers for you to use on premises, they may be able to point you to the nearest tool lending library!
Big grats for diving into fusion to change the designs! That's what makes 3D printing custom stuff so incredibly powerful. I need to organise my space so badly 😫
As far as having to reprint things because they don't fit, first welcome to the hobby I think we have all done that a few hundred times. It doesn't really apply to the bins, but you can always make a test print of just a piece of the model to see if it will fit. for example I made a shelf for my window unit air conditioner that just friction fits into the vent, Instead of printing the whole model I printed a slice that gave me the geometry and I was able to measure how it fit (or didn't) and make changes. It's a little filament wasted but it helps a lot with more complex projects
People don't talk about this enough but having good measuring tools is a pretty important thing which you learned the hard way. I also recommend some digital calipers.
I propose (cheap - medium priced) analoge calipers. No batteries (empty or leaking), no zeroing in every time you use them, and sometimes even more accurate then cheap digital ones
I got some digital callipers when I started learning how to build guitars. I found after a couple of weeks they didn’t work. So after cursing and swearing for a while I got some more, paying more because I figured I’d been seduced into going too cheap with the first one. Turns out it was the batteries Unless you’re going to be using them a lot, I’d say either buy batteries by the box at a time, or use analog callipers instead which need no batteries
@@afpwebworks I got the cheapest digital caliper from harbor freight and have used it 3-4 years and hundreds of projects and haven't had to replace the battery yet but, it did come with a spare. If an electronic item drains the battery when off it's because the switch circuit wasn't designed correctly. I think the guy with a swiss accent had a good video on it.
Just don’t understand why people do collabs with him when he’s literally done nothing for the 3D printing community and has the knowledge of a Best Buy employee that just finished their training. Maker’s Muse, Thomas Sanladerer, Teach tech, CNC kitchen the list goes on but Joel might be nice person but just not there on the knowledge side when it comes to really understanding printing and this is why he needed to call help to build a Voron because even after all this time he couldn’t build a printer from scratch. Just my 2 cents but if you ever want to get information from a reliable source the above listed have been doing it for a very long time and have helped the community.
@@techguy38just because you can't build a voron from scratch doesn't invalidate if his channel provides useful info. He does focus on different things than the channels you mentioned, I love and watch all of them and that still includes him. And it's useful to have a more casual viewpoint anyways. So yes he's not the go to if you need nitty gritty detailed info but he's not trying to claim that he's doing that. His videos are more like entertainment and that's totally fine.
@@techguy38what have you done for the 3D printing community? Would you say something degrading to him in person? Probably not so dont say it on here behind a keyboard, everyone has their preferences it’s called subjectivity. He’s literally the OG 3D printer that got many of the creators you mentioned into 3D printing.
I have been 3d modelling for about 14 years casually and for classes, I still learn new thing now. Also I do recommend learning 3d modelling from scratch. It is much more satisfying.
I agree with learning how to create 3d models from your own ideas. It can be frustrating to start with if you have no experience, but there's several websites and videos to help.
Welcome to 3d printing, wholesome to see your quick progress in this space. The feeling of "I need this but can't find it anywhere, so I'll make my own" is awesome
thank you for including that zoom explanation. i'm certain that's exactly something i'll need to figure out soon and having it there makes it so much easier
Top Tip: If you want to make sure the model will fit, instead of reprinting the whole thing multiple times, just cut a thin cross section and print that.
Hey this was super interesting! There's a certain satisfaction you get with a perfectly organized drawer. I actually see a use for a 3D printer now! I've wanted to get into it, but just couldn't find a practical use... this seems really cool tho.
One crazy idea: just scale the gridfinity grid to a size that evenly fits into your Husky drawers. 42x42mm might be the standard, but it's 3D printing... do whatever works best!
@@mateowoetam yes. If you scale the grid by 10%, you have to scale everything by 10%. It only makes things difficult if you’re trying to print exactly-sized molds for certain items, but I don’t think Sara did that for any of the gridfinity prints in this video.
Absolutely wonderful video, Sara! I've been into 3D printing since 2020, and I have to say that you video really shows what the hobby is like. Well done, and happy to have you back!
Welcome to the addiction! Its still wild to me that Ive been at this over a decade now and there are still new comers every day that get bit with the bug. 3DP is a tool unlike any other when it comes to enabling individuals to simply create whatever their hearts desire. Kudos to you for taking the dive and there is none better than Joel when it comes to bringing others into the family. 🤗
Gridfinity got me back into 3d printing. Bambu printers are amazing. It makes me focus more on 3D modeling rather than tinkering to get my prints to print correctly
I just want to tip my hat to you for shouting out the fusion 360 add in. I did not realize that was a thing, and that is super handy to let me make large plates that will maximize my Prusa XL print bed. Also one tip like some others have said, is to just print the first layer of a print to give yourself the rough sizing idea and make sure it fits as you expect.
one thing that has helped me with 3d printing parts that have constraints is to do a test print. basically a small slice of the original model that I can use to verify measurements, mechanisms, etc without doing a full print. It helps you dial in the printer if need be, potentially save materials on prints that don't pass validation, and because it prints faster then a full print you'll have shorter gaps of time between validation and modifying the model.
that whole section at the end was GOLD. great job and well articulated. And you're right about every single statement/thought! (coming from very experienced in 3d printing FDM and resin and also Fusion 360). Well done! (instantly subbed).
Yesssss ... I love when you say "I feel like I'm wasting time if my printer isn't printing" bc SAME. Soon you'll have 5 printers going all at the same time haha.
Awesome! The reason your extra with bins broke a bit is that the corners on that end printed in the air. The normal Gridfinity bottom grids has a slope to avoid that, but the added rectangles goes 90 degrees into the air. If you turn on supports it should print clean, and maybe use tree supports, they are usually easier to remove without breaking things.
Solid video, so nice to show some of the pitfalls with 3D printing! I'm just getting in to it myself, and I totally know what you mean about the guys that have been doing this for years and the settings etc are all 2nd nature to them - all totally new terms to me. One thing I'd recommend you get is a cheapy set of digital vernier calipers, honestly one of the most useful tools I own and a game changer for getting accurate prints for all your things! You can measure outer diameter, inner diameter and they have a depth gauge as well :)
So much fun and idea sparking watching this. I realized though very quickly that I don’t have the time for this. Definitely opportunities for people to provide this as a service.
Funny timing, my printer arrives tomorrow and, I am frozen to what I want to print first. Everything you showed for organization, is exactly what I am looking for. I cant wait,,,,, to wait for it to print.
You have a top 3d printer. Nice choice. can you imagine living with a printer and wait 3 or 4 times more for the same print? nice tips :) edit: i start with a cheaper model and it's a mess. i sufer too much. for starters please grab a bambulab a1 if you don't need a enclousure to print filaments like PLA/PETG. If you want more mechanical strenght please grab a x1 carbon similar ones. i saves a lot of time. Bambulab it just works. other brands you waste so many time fixing/upgrading it. it simply doesn't for me. and the rfid in filaments are so nice in AMS system. it simply recognise the filament.
I found this video because on my deep 3d researching dive. This is the first time I hear about the plugin isn't working but I'm like why am I just hearing about this, funny I found this tip through you. Thanks for being the source for helping a girl out learn a bit more 3d skills. 3d printing is MIND BLOWING.
She's me fr!! I have just been printing things that fit specifically like my camera batteries and what not. I've actually printed gridfinity items but didn't realize it. This was very useful!!!
When making custom-sized parts to fit an existing space, first print just a frame of your part maybe 1 or 2 mm tall. This will take much less time and filament and you can test the size. For smaller parts, you can get away with only 1 or 2 layers. Also great for checking hole alignment.
Oh Sara, I've watched you for so long and I feel like you've just described my whole 3D experience since I bought a Bambu x1c last Black Friday. I say as I am literally printing MORE gridfinity boxes for my new carts.
Fun video! Even with good measurement tools, it can be hard to get tight fits correct on the first (or second) go. If it is a bigger print, I always print a tester piece of the dimension I want to check. This can often be done without more modelling, just by stopping the print after the first couple of layers are done.
Hey you inspired me to organize my desk with gridfinity, nice Video, i am always sad when my 3d Printer has nothing to do 😮😅 so gridfinity will be my next prints for several days 😊 and welcome to the Club of 3d printing enthusiast 👍
you can add side padding around the outer most edge of the grid. its what i did as my OCD would not let me leave it. i just measured the drawer and kept adjusting how many slots i needed till i hit the max space, then half what was left and entered that into the side padding.
that whole bit about getting measurements wrong and wasted time/filament cutting to the next print sliding in so nicely embodies 3d printing to a tee.I definitely do not have 10 failed prints of my last design on my desk taunting me. The toolbox looks so cool with the black vinyl wrap on the handles.
Hahaha, wonderful! The week I get hooked on 3d printing you have released this video. And while I'm still printing stuff to improve my A1 you not only modify existing models in the slicer software, you are actually able to do CAD!! Brilliant! I have looked into several drawer organization systems and I'll probably go with Neogrid since that doesn't need a ground plate and I hope that increases printing speed and reduces filament use. I'm also looking into the Multiboard system for wall storage. It seems much nicer than the Ikea Skadis I have. More expensive to print, of course, but nice and customizable.
Welcome to the world of 3d printing! Choosing the Bambu is a great choice! I think they make the closest to consumer 3d printers that any manufacture has come. As for the skinny space, the first thought that came to mind was scaling the grid and bin to fit in the slicing software. Either scale the entire drawer or just that last unused space. My only tip is to print experimental / prototype stuff with the less expensive filaments. For example, Elegoo rapid PETG Black, on sale right now is around $10 a roll if you buy a four pack vs their other colors which are around $15. I usually print my test prints in black and when I'm ready for my final products, I will use the colored filaments.
For such simple boxes you could just literally make basic boxes in Blender witout any grid and turn on vase mode in slicer. You would save a lot of time and filament, a also a bit of vertical spce. Or you could learn very basics of any program (could be Blender, Fusion 360, any 3d program), and made your own basic, custom grid and also save printing time and filament. Giridfinity is great as a system, but you don't need to make basic boxes to put in a drawer.
Fellow 3D printer here and noob content creator on here and TikTok. I found you by way of Joel and I want to welcome you to the world of 3D printing. Glad to have you and our world is better for it. I have about 8 printers now but, please let me know if you have any questions.
Man now I want a 3D printer! lol. They seem to be getting better and better so fast. So cool you can tweak things completely to your needs (even if it takes you hours and you die a little inside doing things over and over lol) but yes the drawers looks spot on! I have a few pro big camera boxes and loved that one has adjustments you can move and re stick with velcro but gives you nowhere near this level of customisation. Anyways great video as always :)
I recommend including a low end dedicated graphics card (Nvidia: RTX 4050, RTX 4060, AMD Radeon: RX 7600) on your desktop/laptop upgrade, it help for all the 3d rendering (i.e. Blender, CAD, Slicer software).
Thanks for the tutorial, am thinking of grabbing a 3D printer but not knowing how to design it has stopped me from purchasing. I know is plenty of stuff to print but would like it for stuff around the house. Keep up the tutorials👍🏼🔥
This was a great roller-coaster, you hit every classic obstacle that 3d printing throws, and you powered your way through all of them! Another option for the edges in drawers is rather than extruding an undersized box, try shortening an oversized one instead. That way you keep the geometry underneath that avoids having to make supports or do any fixups on the base bit. Or just do gridfinity for most of the drawer, then print some bento boxes to fill an exact gap all the way up the side. Also, thanks for the bento-boxes, hadn't seen those before! Another youtuber "Hands on Katie" did a really awesome breakdown on the various organisational methods too. She landed on: gridfinity for horizontal surfaces, Multiboard for vertical, and her own expansion on gridfinity for larger items like clothing etc. Well worth checking out!
I wonder if 3d printing people are as happy that you've covered their niche as we (blender people) were to see you try blender! this video was super fun to watch! i admire your drive to try and learn new things! also very happy to hear baby peach is doing well
you're starting the hobby with one of todays best printer on the market. thats incredible! When I satarted with my ender 3 a benchy was like 2.5 hours. Now with a bambu its like 16 min. So being able to print those organizer is viable now. When printing with an ender 3 is wasnt much worth doing. Glad you found a new hobby!
Hi!!!! Great video, I really had a blasta and reminded me of my begginings in 3d printing. Just two quick tips here from someone who has spent the last 3 years prototiping functional prints, and is already on it's 3rd printer, and I really hope it will save you some time, money, and frustration: 1. Before commiting to a full-size print, print just a sample; for instance: in the too big organizers just print the base, no walls, even a skeletonized version with a ton of holes, so you just get a proper sense of the base size, in a quicker fashion and saving a lot of materials. 2.- If you know how or if the design allows for it, put holes in the areas where you know yo can save some time and materials.
I watched the video from start to finish. It was great! I'm relatively new to 3D printing, but we've opened a makerspace in partnership with a university to highlight the educational possibilities of 3D printing. It's not just about printing; it's about problem-solving, math, engineering, imagination, art, creativity, and, of course, the fear of failure. I love 3D printing; the possibilities are endless!
For larger parts you can always do a test fit, just print a few millimetres of the base and see if it fits, if it does, re print the whole thing, if not resize and repeat.
Very cool and great video! I will say from experience that once you get comfortable in Fusion you will unlock door for pretty much anything you might want to make. Glad to see you are having fun with it!
One thing I learned that I think would help you with saving a bit of filament is doing test prints that are only a few layers high in order to make sure that it fits the space you want. I've wasted more filament than I cared to admit to on (like you) 6+ hours only to find out it doesn't fit! so only doing maybe the first 40mins-1hr of the print is probably long enough to get the dimensions of the boxes to know it fits accurately.
Welcome to the 3D printing world! With Gridfinity, if you're not planning on using magnets you can print a much simpler base grid to use a lot less filament and speed things up.
What a fantastic video! It's awesome seeing someone else get into a hobby that you love yourself, and boy did you dive in head first! Good luck finding the surface again
There was an easier way. using blender. You bring the STL into Blender select the faces and then move it over the number of mm needed then export the STL back out remembering to scale it by 1000 because Blender is weird like that. CAD is amazing but sometimes a non-CAD solution is going to be faster.
Omg best idea with the drawer pulls. Idk why I didn't come up with that idea, I've had the same issue with the husky drawers lol. So good, ty for sharing everything in this video :)
"If my printer is not running, I feel like I am wasting time " - you are a true 3d printing hobbyist now! Welcome
and for anyone who doesn't know there is a gridfinity designer plugin for fusion that you can install and its free.
So, old sewist here. Way back in high school sewing class in the 70s we were taught that cloth measuring tape was notoriously inaccurate. For one, they stretch out. Teacher said to keep an accurate metal ruler on hand to measure new and old tapes against to make sure they were accurate.
Here we are, decades later and in the next century, and I still have a metal ruler on hand. More than one, really. One in my craft room, one in my toolbox, and one in the kitchen.
When I saw you pull out that cloth measuring tape I thought, “Uh oh!” Sorry you wasted all that time and material but those boxes got used anyway.
I love your channel. I learn so much even if I never use it. It’s useful to know about it. I’d really love to do some 3-D printing someday but don’t know anyone with one….yet.
Well done!
That is EXACTLY what I wanted to know. Thanks a lot for your input !
Just get a cheap Ender 3 v3 (ke/se) they're great for Starters and pretty cheap compared to Bambus (Sure Not as polished but hey the lay down plastic pretty well)
@@JanSt12for anyone getting into the hobby I usually recommend the A1 mini it's not much more expensive and can save lots of frustration. I have a ender 5 pro and love it but if I was buying today would definitely get a bambu
If you're in the US, try contacting your local library system! Even if they don't have 3d printers for you to use on premises, they may be able to point you to the nearest tool lending library!
@@wyw876 thank you! I’ll do that. Great idea.
Big grats for diving into fusion to change the designs! That's what makes 3D printing custom stuff so incredibly powerful. I need to organise my space so badly 😫
As far as having to reprint things because they don't fit, first welcome to the hobby I think we have all done that a few hundred times. It doesn't really apply to the bins, but you can always make a test print of just a piece of the model to see if it will fit. for example I made a shelf for my window unit air conditioner that just friction fits into the vent, Instead of printing the whole model I printed a slice that gave me the geometry and I was able to measure how it fit (or didn't) and make changes. It's a little filament wasted but it helps a lot with more complex projects
People don't talk about this enough but having good measuring tools is a pretty important thing which you learned the hard way. I also recommend some digital calipers.
And the good old tape measure for anything too big for calipers.
I propose (cheap - medium priced) analoge calipers. No batteries (empty or leaking), no zeroing in every time you use them, and sometimes even more accurate then cheap digital ones
I got some digital callipers when I started learning how to build guitars. I found after a couple of weeks they didn’t work. So after cursing and swearing for a while I got some more, paying more because I figured I’d been seduced into going too cheap with the first one. Turns out it was the batteries Unless you’re going to be using them a lot, I’d say either buy batteries by the box at a time, or use analog callipers instead which need no batteries
@@afpwebworks I got the cheapest digital caliper from harbor freight and have used it 3-4 years and hundreds of projects and haven't had to replace the battery yet but, it did come with a spare. If an electronic item drains the battery when off it's because the switch circuit wasn't designed correctly. I think the guy with a swiss accent had a good video on it.
She's really hooked, she's already one of us!
One of us one of us one of us
SO SO HAPPY you're having fun 3d printing!!!
Just don’t understand why people do collabs with him when he’s literally done nothing for the 3D printing community and has the knowledge of a Best Buy employee that just finished their training.
Maker’s Muse, Thomas Sanladerer, Teach tech, CNC kitchen the list goes on but Joel might be nice person but just not there on the knowledge side when it comes to really understanding printing and this is why he needed to call help to build a Voron because even after all this time he couldn’t build a printer from scratch.
Just my 2 cents but if you ever want to get information from a reliable source the above listed have been doing it for a very long time and have helped the community.
@@techguy38just because you can't build a voron from scratch doesn't invalidate if his channel provides useful info. He does focus on different things than the channels you mentioned, I love and watch all of them and that still includes him. And it's useful to have a more casual viewpoint anyways. So yes he's not the go to if you need nitty gritty detailed info but he's not trying to claim that he's doing that. His videos are more like entertainment and that's totally fine.
@@techguy38 You should rewatch the part when she say "too smart for them own good" ?
@@hugosoucy1115 @techguy38 29:46
@@techguy38what have you done for the 3D printing community? Would you say something degrading to him in person? Probably not so dont say it on here behind a keyboard, everyone has their preferences it’s called subjectivity. He’s literally the OG 3D printer that got many of the creators you mentioned into 3D printing.
joel looks good color graded
No kidding! He looks kind of healthy!
Joel is a mad lad in the 3d printing space - the dude is a solid teacher
I LOVE when someone joins us. When you see the calipers, ooooooooowweeeeeee. One of us, one of us.
The b-roll and slow mo slider shots of the printer printing were straight fire. Sara still letting the creativity shine through.
I have been 3d modelling for about 14 years casually and for classes, I still learn new thing now.
Also I do recommend learning 3d modelling from scratch. It is much more satisfying.
I agree with learning how to create 3d models from your own ideas. It can be frustrating to start with if you have no experience, but there's several websites and videos to help.
The collab we didn't know we needed! Love it.
Welcome to 3d printing, wholesome to see your quick progress in this space. The feeling of "I need this but can't find it anywhere, so I'll make my own" is awesome
thank you for including that zoom explanation. i'm certain that's exactly something i'll need to figure out soon and having it there makes it so much easier
Top Tip: If you want to make sure the model will fit, instead of reprinting the whole thing multiple times, just cut a thin cross section and print that.
Hey this was super interesting! There's a certain satisfaction you get with a perfectly organized drawer. I actually see a use for a 3D printer now! I've wanted to get into it, but just couldn't find a practical use... this seems really cool tho.
Appreciate the use of metric in this video 🙏🏽
"I feel like if my printer isn't running, I am wasting time." Oh god how did you explain my feeling so accurately
I"ve been following you for years as well as 3D printing Nerd .. great mash-up :-). Love this video
One crazy idea: just scale the gridfinity grid to a size that evenly fits into your Husky drawers. 42x42mm might be the standard, but it's 3D printing... do whatever works best!
honestly yes. good idea. then i wouldn't have to reinvent the wheel for every drawer
i think theres a specific reason behind why zach sized them that way
But then all the other gridfinity project you print will have to adapt to that one place or not fit if you keep the normal dimensions.
@@mateowoetam yes. If you scale the grid by 10%, you have to scale everything by 10%. It only makes things difficult if you’re trying to print exactly-sized molds for certain items, but I don’t think Sara did that for any of the gridfinity prints in this video.
Never break the 42 rule. 🫢
Very good choice with the Gridfinity.
Absolutely wonderful video, Sara!
I've been into 3D printing since 2020, and I have to say that you video really shows what the hobby is like.
Well done, and happy to have you back!
Welcome to the addiction! Its still wild to me that Ive been at this over a decade now and there are still new comers every day that get bit with the bug. 3DP is a tool unlike any other when it comes to enabling individuals to simply create whatever their hearts desire. Kudos to you for taking the dive and there is none better than Joel when it comes to bringing others into the family. 🤗
Thank you for highlighting the issues you had because folks new to 3D printing should know things are not always perfect.
Gridfinity got me back into 3d printing. Bambu printers are amazing. It makes me focus more on 3D modeling rather than tinkering to get my prints to print correctly
I just want to tip my hat to you for shouting out the fusion 360 add in. I did not realize that was a thing, and that is super handy to let me make large plates that will maximize my Prusa XL print bed.
Also one tip like some others have said, is to just print the first layer of a print to give yourself the rough sizing idea and make sure it fits as you expect.
one thing that has helped me with 3d printing parts that have constraints is to do a test print. basically a small slice of the original model that I can use to verify measurements, mechanisms, etc without doing a full print. It helps you dial in the printer if need be, potentially save materials on prints that don't pass validation, and because it prints faster then a full print you'll have shorter gaps of time between validation and modifying the model.
that whole section at the end was GOLD. great job and well articulated. And you're right about every single statement/thought! (coming from very experienced in 3d printing FDM and resin and also Fusion 360). Well done! (instantly subbed).
Yesssss ... I love when you say "I feel like I'm wasting time if my printer isn't printing" bc SAME. Soon you'll have 5 printers going all at the same time haha.
Awesome!
The reason your extra with bins broke a bit is that the corners on that end printed in the air. The normal Gridfinity bottom grids has a slope to avoid that, but the added rectangles goes 90 degrees into the air. If you turn on supports it should print clean, and maybe use tree supports, they are usually easier to remove without breaking things.
Oooh I’ll try tree supports thank you!
Wow you really did your homework! From gridfinity, to the f360 add on, to that box generator thingy. Learning CAD is the best companion to 3D printing
The team up I didn’t know I wanted, but am here for
27:27 thank you for this lesson. I don't print, but now... You gave more stuff to loose my mind in 😅 probably will enter this world 🗺 wish me luck!🤞
hahahaha love the last 2mins of the video, can't wait to see your future projects with 3d printing!!!
Solid video, so nice to show some of the pitfalls with 3D printing! I'm just getting in to it myself, and I totally know what you mean about the guys that have been doing this for years and the settings etc are all 2nd nature to them - all totally new terms to me. One thing I'd recommend you get is a cheapy set of digital vernier calipers, honestly one of the most useful tools I own and a game changer for getting accurate prints for all your things! You can measure outer diameter, inner diameter and they have a depth gauge as well :)
You watch Zack Freedman toooo!! Love the guy and I'm really glad you love the website. Getting into the 3D printing stuff myself too recently
Just saw 3D printing nerds video unboxing so glad you are printing now!
So much fun and idea sparking watching this. I realized though very quickly that I don’t have the time for this. Definitely opportunities for people to provide this as a service.
People already do!
Just FYI, the loading part is pretty much always like that, force it until it snatches it from you. So far it's still very very satisfying.
What a fun video. When I print anything that needs to fit in another object I use the slicer to cut it up and print quick test sections.
Funny timing, my printer arrives tomorrow and, I am frozen to what I want to print first.
Everything you showed for organization, is exactly what I am looking for. I cant wait,,,,, to wait for it to print.
You have a top 3d printer. Nice choice. can you imagine living with a printer and wait 3 or 4 times more for the same print? nice tips :)
edit: i start with a cheaper model and it's a mess. i sufer too much.
for starters please grab a bambulab a1 if you don't need a enclousure to print filaments like PLA/PETG.
If you want more mechanical strenght please grab a x1 carbon similar ones. i saves a lot of time.
Bambulab it just works. other brands you waste so many time fixing/upgrading it. it simply doesn't for me.
and the rfid in filaments are so nice in AMS system. it simply recognise the filament.
I found this video because on my deep 3d researching dive. This is the first time I hear about the plugin isn't working but I'm like why am I just hearing about this, funny I found this tip through you. Thanks for being the source for helping a girl out learn a bit more 3d skills. 3d printing is MIND BLOWING.
She's me fr!! I have just been printing things that fit specifically like my camera batteries and what not. I've actually printed gridfinity items but didn't realize it. This was very useful!!!
When making custom-sized parts to fit an existing space, first print just a frame of your part maybe 1 or 2 mm tall. This will take much less time and filament and you can test the size. For smaller parts, you can get away with only 1 or 2 layers. Also great for checking hole alignment.
Oh Sara, I've watched you for so long and I feel like you've just described my whole 3D experience since I bought a Bambu x1c last Black Friday. I say as I am literally printing MORE gridfinity boxes for my new carts.
Your color grading is just looking insane I feel like it’s gotten just so much better
Amazing video!!
Yay!! Your soul is fed!! Best kind of videos ❤🎉
Fun video! Even with good measurement tools, it can be hard to get tight fits correct on the first (or second) go.
If it is a bigger print, I always print a tester piece of the dimension I want to check. This can often be done without more modelling, just by stopping the print after the first couple of layers are done.
Been in 3d space for years, first time i have seen grid ininity, even though i have seen Zac's content *mind blown* Thanks Sarah.
Likewise! Been printing stuff all day!
So awesome to see Sara and 3DPrintingNeder teaming up 💪💪💪💪💪💪💪💪
Great basic questions - sort of questions I wanted and needed to ask..
Nerds being too smart for their own good is straight facts.
YEPPP😂
Especially thanks for the post-script section of the video. Kudos!
Havent seen your videos for years now. and i am even happier you return with 3d printing content :D
Hey you inspired me to organize my desk with gridfinity, nice Video, i am always sad when my 3d Printer has nothing to do 😮😅 so gridfinity will be my next prints for several days 😊 and welcome to the Club of 3d printing enthusiast 👍
you can add side padding around the outer most edge of the grid. its what i did as my OCD would not let me leave it. i just measured the drawer and kept adjusting how many slots i needed till i hit the max space, then half what was left and entered that into the side padding.
Nice video. That was quick to get to the point were, if the printer is not printing the unproductive feeling comes. Enjoy and happy printing.
Yes Sara! Let’s go this will be fun.
P.S. you’ve been missed
that whole bit about getting measurements wrong and wasted time/filament cutting to the next print sliding in so nicely embodies 3d printing to a tee.I definitely do not have 10 failed prints of my last design on my desk taunting me. The toolbox looks so cool with the black vinyl wrap on the handles.
Hahaha, wonderful! The week I get hooked on 3d printing you have released this video. And while I'm still printing stuff to improve my A1 you not only modify existing models in the slicer software, you are actually able to do CAD!! Brilliant!
I have looked into several drawer organization systems and I'll probably go with Neogrid since that doesn't need a ground plate and I hope that increases printing speed and reduces filament use. I'm also looking into the Multiboard system for wall storage. It seems much nicer than the Ikea Skadis I have. More expensive to print, of course, but nice and customizable.
Ah yes, the near-universal need for more printers to get projects done faster. I have 5 X1 Carbons and I love them!!!
Welcome to the world of 3d printing! Choosing the Bambu is a great choice! I think they make the closest to consumer 3d printers that any manufacture has come.
As for the skinny space, the first thought that came to mind was scaling the grid and bin to fit in the slicing software. Either scale the entire drawer or just that last unused space.
My only tip is to print experimental / prototype stuff with the less expensive filaments. For example, Elegoo rapid PETG Black, on sale right now is around $10 a roll if you buy a four pack vs their other colors which are around $15. I usually print my test prints in black and when I'm ready for my final products, I will use the colored filaments.
For such simple boxes you could just literally make basic boxes in Blender witout any grid and turn on vase mode in slicer. You would save a lot of time and filament, a also a bit of vertical spce. Or you could learn very basics of any program (could be Blender, Fusion 360, any 3d program), and made your own basic, custom grid and also save printing time and filament. Giridfinity is great as a system, but you don't need to make basic boxes to put in a drawer.
Fellow 3D printer here and noob content creator on here and TikTok. I found you by way of Joel and I want to welcome you to the world of 3D printing. Glad to have you and our world is better for it. I have about 8 printers now but, please let me know if you have any questions.
Man now I want a 3D printer! lol. They seem to be getting better and better so fast. So cool you can tweak things completely to your needs (even if it takes you hours and you die a little inside doing things over and over lol) but yes the drawers looks spot on! I have a few pro big camera boxes and loved that one has adjustments you can move and re stick with velcro but gives you nowhere near this level of customisation. Anyways great video as always :)
Can you please organize my studio...and my life? lol. How satisfying!!!
The quote of just because you can, doesn't mean you should resonates with me so much.
I recommend including a low end dedicated graphics card (Nvidia: RTX 4050, RTX 4060, AMD Radeon: RX 7600) on your desktop/laptop upgrade, it help for all the 3d rendering (i.e. Blender, CAD, Slicer software).
I just started too. You have no idea of the HUGE rabbit hole you've gotten yourself into! 😍
i just picked up this printer 2 weeks ago! its amazing.
the tiny benchy is a profile i added its so tiny but awesome
best of luck with your new printer
Thanks for the tutorial, am thinking of grabbing a 3D printer but not knowing how to design it has stopped me from purchasing. I know is plenty of stuff to print but would like it for stuff around the house. Keep up the tutorials👍🏼🔥
This was a great roller-coaster, you hit every classic obstacle that 3d printing throws, and you powered your way through all of them! Another option for the edges in drawers is rather than extruding an undersized box, try shortening an oversized one instead. That way you keep the geometry underneath that avoids having to make supports or do any fixups on the base bit. Or just do gridfinity for most of the drawer, then print some bento boxes to fill an exact gap all the way up the side. Also, thanks for the bento-boxes, hadn't seen those before!
Another youtuber "Hands on Katie" did a really awesome breakdown on the various organisational methods too. She landed on: gridfinity for horizontal surfaces, Multiboard for vertical, and her own expansion on gridfinity for larger items like clothing etc. Well worth checking out!
It's weird how much my hobbies are following Dietschy's content
I wonder if 3d printing people are as happy that you've covered their niche as we (blender people) were to see you try blender! this video was super fun to watch! i admire your drive to try and learn new things!
also very happy to hear baby peach is doing well
oh and Judy is the sweetest cutie pie in the world!
you're starting the hobby with one of todays best printer on the market. thats incredible! When I satarted with my ender 3 a benchy was like 2.5 hours. Now with a bambu its like 16 min. So being able to print those organizer is viable now. When printing with an ender 3 is wasnt much worth doing.
Glad you found a new hobby!
Hi!!!!
Great video, I really had a blasta and reminded me of my begginings in 3d printing.
Just two quick tips here from someone who has spent the last 3 years prototiping functional prints, and is already on it's 3rd printer, and I really hope it will save you some time, money, and frustration:
1. Before commiting to a full-size print, print just a sample; for instance: in the too big organizers just print the base, no walls, even a skeletonized version with a ton of holes, so you just get a proper sense of the base size, in a quicker fashion and saving a lot of materials.
2.- If you know how or if the design allows for it, put holes in the areas where you know yo can save some time and materials.
Gridfinity is your answer :) it has a lot of different premade boxes for it already.
I watched the video from start to finish. It was great! I'm relatively new to 3D printing, but we've opened a makerspace in partnership with a university to highlight the educational possibilities of 3D printing. It's not just about printing; it's about problem-solving, math, engineering, imagination, art, creativity, and, of course, the fear of failure. I love 3D printing; the possibilities are endless!
For larger parts you can always do a test fit, just print a few millimetres of the base and see if it fits, if it does, re print the whole thing, if not resize and repeat.
Thin baseplate with magnets on Printables for those drawers.
You might like Gridfinity Rebuilt for OpenSCAD.
So hype to see you get into this! Good note on the end credits, note taking in specialized projects makes a huge difference.
I absolutely love your videos, so easy to follow, interesting and the recap just brings it all together with your points and opinions.
Very cool and great video! I will say from experience that once you get comfortable in Fusion you will unlock door for pretty much anything you might want to make. Glad to see you are having fun with it!
You can print spacers for sides and center the grid. You can also print half grids. Someone made fractional grids
Definitely a good call getting rid of the shiny chrome and going all black
One thing I learned that I think would help you with saving a bit of filament is doing test prints that are only a few layers high in order to make sure that it fits the space you want. I've wasted more filament than I cared to admit to on (like you) 6+ hours only to find out it doesn't fit! so only doing maybe the first 40mins-1hr of the print is probably long enough to get the dimensions of the boxes to know it fits accurately.
I'm glad I stayed till the end, Using those husky label angles.
Welcome to the 3D printing world! With Gridfinity, if you're not planning on using magnets you can print a much simpler base grid to use a lot less filament and speed things up.
What a fantastic video! It's awesome seeing someone else get into a hobby that you love yourself, and boy did you dive in head first! Good luck finding the surface again
nice one!!
So, both orange and peach are your favorite colors. Right. This video is awesome. I feel so happy for you.
selalau belajar hal baru. keren..
I thoroughly enjoyed this video! I'm currently saving up for a 3d printer myself.
There was an easier way. using blender. You bring the STL into Blender select the faces and then move it over the number of mm needed then export the STL back out remembering to scale it by 1000 because Blender is weird like that. CAD is amazing but sometimes a non-CAD solution is going to be faster.
Okay. That slicing/extruding part for non integer bins was pretty smart. I am gonna apply this NOW
Omg best idea with the drawer pulls. Idk why I didn't come up with that idea, I've had the same issue with the husky drawers lol. So good, ty for sharing everything in this video :)