How to make more / better foam with your foam cannon! Use 1.1 mm orifice nozzle tip from AMAZON 10$.
Vložit
- čas přidán 16. 07. 2024
- If you are looking to make more foam with your foam cannon look no further than this video.
This system as I explain in this video may only work on electric pressure washers, but don't take my word for that because I don't own a gas pressure washer to try it.
Product is rated till 3000 PSI. and most gas pressure washers are over that. That's why I believe it is more meant for electric pressure washer. Again, that is just my theory.
Orifice Nozzle Tips and Foam Maker, Universal 1.1 mm: amzn.to/3N02n2E
CRAFTSMAN Pressure Washer, 1700 PSI, 1.2 GPM amzn.to/3DK0Yrg
This pressure washer is currently sold out. I'll to update link asap.
UBERFLEX Kink Resistant Pressure Washer Hose 1/4" x 50' 3,100 PSI with (2) 22MM:
amzn.to/3D5uCrC
Chemical Guys Foam Canon: amzn.to/34GB746
AR ANNOVI REVERBERI MV925 Rear Entry High Pressure Gun: amzn.to/2WgG2HZ
Chemical Guys Monster Extreme Thickness Premium Microfiber Towel (16" x 16"): amzn.to/3wQS73E
Mr. PINK Soap Chemical Guys: amzn.to/3vLTJLW
If you have a pressure washer with Metric M22 15mm Female Thread and want to convert it to M22 14mm Male Fitting: amzn.to/3o0CELF
If you are looking for quick connects fittings, you might want to look at this kit: amzn.to/34nQnqg
Chemical guys have a new Foam Canon, but I have not personally tested it out yet. In case you want to get the newer one link is here below:
Chemical Guys EQP324 Big Mouth Max Release Foam Cannon amzn.to/3p709ov
Husky 10-piece ratcheting combination wrench set: https: //amzn.to/3u5LMl7
CRAFTSMAN Screwdriver, Slotted, 5/16-Inch x 6-Inch (CMHT65063): amzn.to/3tfkfP9
Social Media:
Instagram - / 297modz
CZcams - / 297modz
-------------------------------------------------------------------------------------------------------------------------------------------------------
I typically record with either my phone or GoPro:
Galaxy Z Flip 3: amzn.to/3Eqbip6
Go Pro Hero 9 Black: amzn.to/3vabvsZ
Go Pro Accessories:
GoPro Max Grip + Tripod: amzn.to/3uMbGsp
SeaSucker 4.5" Low Profile Vacuum Mounts (Black): amzn.to/36M1mum
SMALLRIG 9.5 inch Adjustable Articulating Magic Arm: amzn.to/3tYBORT
Single Shoulder Strap Mount: amzn.to/3DL7I8D
Sabrent GoPro Head Strap Camera Mount: amzn.to/3aEaD6k
SanDisk 128GB Extreme microSDXC UHS-I Memory Card with Adapter - Up to 160MB/s
amzn.to/2TRlsxg
For any Business Inquiries, Sponsorships or Collaborations in Dallas Fort Worth area or Aruba please e-mail me at: 297modz@gmail.com
Nice setup, I need to start detailing my car.
Thanks man! It's going to be nicer in couple weeks when the floors go in. And than I can build a corner for my washing station!
Nice!!!
🙌🏽🙌🏽🙌🏽 un abrazo bro. Esprero q estes bien!
That looks great, but chemical guys says the foam should roll down the car, so that the dirt particles will roll down with it. If the foam is too thick and doesn't move, the dirt doesn't move and if you use a wash mitt, then you'll get scratches.
100% agree. I leave it for whatever time is needed until it run down before I whipe anything. When I wash/detail the car I'm never in a hurry! But yes very important observation you did my friend.
@@297modz 👍👍👍
🔥🔥🔥
Thanks bro! Hope you are doing well!
Also, use warm/hot water in the foam cannon for a bit more foam.
Cool bro. I'll try that next time!
Nice video! Hey I have a question. How's the trigger and swivel action on that gun? Do you get any fatigue after washing your car? Also, is the swivel smooth enough or does it get too stiff under pressure?
Thanks bro! Trigger is great! No fatigue at all. Under pressure the swivel doesn't really do much. It has to be a way more expensive one for it to swivel smooth under preassure.
I have been talking to a company to review one hopefully un the near future.
@@297modz Awesome! Thank you for your answer! Keep up the good work!!!
How is that craftsman pressure washer holding up? I’m trying to decide between this or the ryobi 1600
It is holding up good! If you going to mainly wash cars and light duty arround the house it does the job.
In next few weeks I'll be cleaning some areas around the house ans compare it to my Sunjoe and to finally decide which one I'm keeping. That will be after I come from vacation and stuff.
Nice. How long do you normally leave the foam on?
Hey man! There is no specific timing. Depends on the weather. If colder and cloudy, I would leave it longer.
When summer is like 90 or 100 degrees like here in TX. I would rather spray it 2 or even 3 more times. And not let the water spots get on the car.
@@297modz so, Im not familiar with foaming soap. Spray, leave and rinse?
@drewkoerick6122 if you wash regularly and not that dirty. You can rins, foam and again rins and foam.
If dirty. I would, on second foam, go over the car with a wash mit and then foam 1 more time before drying it.
hey man, that mesh screen part fits on the other end of the spray gun. Not my video but if you want to install it this will help czcams.com/video/d1ir0yAw888/video.html
Hey man! Somehow I missed your comment! Thanks for this tip! Really appreciate that. Will try to add in a video or make a video about it!