Challenger SRT Performance Spoiler - How to remove and install your spoiler
VloĆŸit
- Äas pĆidĂĄn 5. 07. 2019
- In this video I cover how to remove the Challenger rear spoiler and install the new SRT Performance Spoiler. It's an easy swap takes about 1 hour and the new SRT Performance Spoiler (aka Redeye spoiler) is compatible with most 2015 and up Challengers.
I grabbed mine from eastcoastmoparts.com at the time it was $390, but since posting on Instagram I see the price is rising...
đŽ Mopar part number 6QW33RXFAC
www.eastcoastmoparts.com/oem-...
Below are Amazon Affiliate links to all the supplies I've used for this install.
1. Optimum No Rinse amzn.to/2XRMzrV
2. Meguiar's Clay Kit amzn.to/2LBFnK5
3. 3M Adhesive Remover amzn.to/2LDFcxK
4. Fastener removal kit amzn.to/2LDEyAk
5. Interior Trim Tools amzn.to/2LKwtKp
6. 10MM Deep socket amzn.to/2YCiZUn
7. Kirkland plush microfiber towels amzn.to/2XqntRs
8. Porter and Cable heat gun 1500 W amzn.to/2S18JTq
đŽ The Luxe 3 layer taillight center decal seen in this video bit.ly/Luxe3layer
đŽ More Affiliate Stuff (Helps the channel) đŽ
I started an Amazon page dedicated to all the tools I use, check out my Amazon Affiliate Storefront - bit.ly/WPDToolStore
(amazon affiliate links will get you to the tools I use and you pay the same low price while Amazon gives me a small bounty to help fund my videos)
✠WorkPlayDrive Approved product Discount Page
www.workplaydrive.com/product-...
✠My Video Recording Gear âœ
bit.ly/WPDRecordingGear
✠Advanced Audio setup âœ
bit.ly/WPDRecordingGear
đŽ WorkPlayDrive APPROVED Products đŽ
Luxe Auto Concepts
I'm a Luxe affiliate your purchases save you money 5% as of right now and help my channel a little.
Get your tint kits here bit.ly/2lYCvux
5% Discount code WPD2022
✠G2 Caliper Paint
The Orange Kit I used
amzn.to/2gmaVBX (amazon associate Link)
The Black Kit I used
amzn.to/2gg78F3 (amazon associate Link)
For more G2 Info head over to my site, I'll keep any current discounts and info here.
www.workplaydrive.com/G2/
2015 Dodge Challenger
2016 Dodge Challenger
2017 Dodge Challenger
2018 Dodge Challenger
2019 Dodge Challenger
Widebody Hellcat
Demon
Widebody Scat Pack
~*~*~*~*~*~ Folow us ~*~*~*~*~*~
www.workplaydrive.com
/ workplaydrive
/ workplaydrive392
/ workplaydrive
~*~*~*~*~*~ Music Info ~*~*~*~*~*~
Background Track
Song: Like Before
Artist: INTL.CMD
Support the Artist(s):
/ intl.cmd
/ intlcmd
License: Creative Commons Attribution-ShareAlike 3.0 - bit.ly/RFP_CCSAlicense
This license states that the material can be shared, remixed and used commercially as long as you give appropriate credit to the creator. Click the link above for more information.
Please add the following to the description of your work: INTL.CMD - Like Before: âą INTRNLCMD - Like Befor...
------------------
End Screen
đ” Beats By Shocka252 đ” / livinproofsoldier
/ amongstkingz252 - Auta a dopravnĂ prostĆedky
The 80's synthwave music is amazing đ
Yeah it took me a while to find some good royalty free synth wave đ€
Update: Spoiler installed!
Video was a super big help and I preserved the OG spoiler in hopes to sell haha.
This video deserves every view it gets!
Awesome, and good luck selling a few years later I still have mine sitting in the box waiting for someone to buy it.
@@WorkPlayDrive I was actually able to sell it in less than a month iirc. $300
I just wanted to say that after watching through your previous videos I decided to purchase a 2015 scat pack ( I pick it up Tuesday). You played a huge part in my decision making process, Thank you for all of the time and effort you put into your videos.
Thank you, I'm glad I helped in some small way. Congrats on the Scat pack, you will really enjoy it ;)
@@WorkPlayDrive, I just started following your channel and it is excellent. I noticed the NJ plate. I am currently shopping for a Hellcat. I am all the way down in Cape May County, the dealers down here don't have any, where do you recommend to shop for one?
Congrats on your purchase of the Hellcat. Just ordered this spoiler for my 2016 R/T Plus. The vendor you recommended was very nice and verified it would fit. I also used your tutorial to help me with the Barton install. Cheers!
Awesome glad to help and thank you!
Excellent video! You always give great detail , tips & tricks on installs. & I appreciate the info & opinions you give on products. This is a sweet looking spoiler, I love its' lines & downturn on the edges. The fact that the camera's positioning on this spoiler now allows you to see your bumper too - fantastic added bonus! Thanks for another great video, keep 'em comin'!
Thank you for the kind words! I'm still totally eyeing this spoiler every time I approach the car ;)
You just earned a subscriber bro! Thank you so much for this! I just bought my Hellcat a month ago and asked about swapping out spoilers and they had no idea what I was talking about! GOOD JOB on providing links for where to get the spoiler and what you used. I just bought the spoiler and a few things you used and I should have everything this week. I am stoked about this swap man! I will be rewatching this video again to install it when it arrives. Thanks man!! Straight HERO man!
Thank you, I appreciate you taking the time to let me know it helped. The info out there is scarce and incomplete so I try to fill the gaps ;)
As always, nice install! That spoiler is awesome. I installed it on my car as well. I grabbed one as soon as I could find one.
Thank you đ. It took me a while to decide, but once I saw it IRL I needed it immediately đ
I installed one over the winter. I love it. It reminds of the Hurst Airspeed spoiler that was part of the Hurst packages.
Oh wow I never even put those together they do look similar
Thanks for the video, just getting ready to have my shaker hood, roof and trunk wrapped. In trying to figure out how to remove the o-ring (apx 4' of 3m adhesive) from the hood, one shop mentioned a trick they would use to remove and loosen adhesive. STEAM, wow the difference of using a fishline (60lb) to cut through adhesive is night and day using steam. I was able to remove the o-ring with no damage. In my case I used a handheld steamer that can be held upside down (apx $25 on Amazon). Not only that but for cleaning it does a great job, as it won't damage the paint (unlike a heat gun).
Thanks for the video Mike. Ordered from East coast moparts on Black Friday, and received my tracking info for today. love the way it looks, and how thorough the video was.
nice! I'm in love with this spoiler and the new camera angle. I can't believe I ripped on it when I saw the first photos from Dodge.
Yo Work Play Drive, just received my SRT Performance Spoiler last week and installed it a couple days ago. The hard part was doing it the heat of my garage. Your video was spot on with the installation process. I love the new look it gives the Cat!!! Thanks for the video.
I also, have a dash cam and routed all my wires along the head liner behind the glove box and along the center console to use the 12 supply on the passenger side for the front cam and the rear was in the head liner all the way. Love the Sound of the Cat starting up, a piece of music I'll enjoy for eternity! ;)
Hey glad to help and thank you đ for the kind words. love the spoiler so happy I got it.
Great install video. Looks great and it's pretty cool how you can see the bumper now with the overhang.
Yeah it was a nice bonus. Also I heard from someone the new airflow cuts down on the bumper dirt.
It looks really really really good with that diffuser and that color
Glad to see this come up. I was just looking at these this week.
:)
Great video!! Always thorough and easy to listen to. I like the spoiler look also.
Thank you!
Thanks for the info for the redeye spoiler! I just ordered it today from them! I have a 2018 Challenger Hellcat!!
Awesome enjoy đȘ
it almost looks like a viper spoiler. love it.
Man I just want to say thank you, I pretty much used every single link on Amazon you had and I just got it done. I bought my chally brand new and instantly put a wicker bill on the open spoiler and Iâve hated it for 3 years. Your video popped up on my CZcams and I didnât hesitate. I wish I could do more than give you a like. Thanks again man!
Thank you and thatâs awesome this brought back some love for your car. đ
By chance do you remember the the part # for the spoiler
@@courtlandblair7078 6QW33RXFAD
Thank you for the video. I have mine on the way so going to go ahead and remove my old spoiler but wasnât sure how to. Thank you again
No problem đ
Great video! Been thinking about changing to this spoiler on my scat pack, going to pick it up now after watching.
Awesome Iâm loving it enjoy
I finally decided to get the install done , the guy who did it, saw your video first and he sprayed liquid and the 3m got easy to remove and used another liquid to remove residue from the 3m .
Everything was done in less than 15 minutes.
Awesome, how do you like it?
@@WorkPlayDrive
I love it !
Thinking about doing the diffuser but I also want the differential brace
I wanna say thanks bro. This inspires me to do this and no damage!
Thank you đ
Great job as always and looks really good!!!!!
Thank you!
Amazing installation guide as always.
Thank you
Great, didn't plan on spending $400 this weekend! Looks great, nice video as always
đđ sorry but exactly how I felt when one of our club members showed up with one on his scat. I went home and ordered it that night.
@@WorkPlayDrive definitely looks better than the default one i was going to order. $50 more for this looks worth it.
Mike, you are killing it man. 7:25 to 7:34...Rusty long nose pliers, rust is optional đđ€Łđ
My way of addressing the obvious before the CZcams comment section opens fire đđđ
Love the 80s synthwave music
Wow I love the spoiler, great choice. Itâs in the eBay cart. Iâm ready for it.
Great video and content as always! Keep up the great work!
Thank you
I just did this and it came out great! Thank you so much for the video!
Glad it helped đȘ
Awesome video! I have a 2017 challenger RT, hoping this will fit iâm about to pick one up
As always, a great video. AWESOME
Thank you đ
That looks fantastic that's definitely a must do mod.đ
Thanks man đȘ
Excellent install vid!đđ»đđ»
Thank you đ
Iâm doing cosmetic work to my challenger and I somehow keep ending up on your channel.
Keep up the good work đ
Glad to help!
My camera went bad and i was wondering how to replace it. Thank you for this video I'm keeping my spoiler but now i know how to take it apart to get to the camera
Sorry not sure Iâm assuming you remove the lower panel then the camera just has a nut and washer holding it in place
Another excellent video by WPD!
Thanks dude!
You do it like a boss! Great job and nice video. Thanks bru
Thank you đ
Awesome Vid, thanks. got my srt spoiler 2 days ago
Nice đ thank you
Very well done and easy to understand. đ
Thank you đ
Solid vid. Once I knew where all the little clips were underneath it was a breeze to swap out the spoilers.đđœđđœ
Thank you, agreed those clips were a few moments of frustration for me.
Spoiler looks clean đđ
Thank you đ
Canât smash the like button enough. Thank you so much for this. Iâm going to be putting it on my R/T Shaker when it comes in later this year
Awesome congrats on the new ride đȘ
@@WorkPlayDrive thank you! Iâm praying each day that Iâll be able to finance it when it comes in. Got a few puzzle pieces to fit before it comes in
I wish you the best. I learned at a young age that itâs hard to enjoy vehicles that are a financial burden, but I did it so many times so I got good at it đ€
@@WorkPlayDrive thatâs why Iâm working hard as ever to make sure itâs not a financial burden. 7 days a week
Very well narrated video. You are a good tutor.
Thank you đ
That looks sharp. Great video.
Thank you đ
Awesome video thanks for sharing đ looks awesome
Thank you âșïž
I was not a fan until an NJM member bought a new 2019 Challenger and I got to see it up close a couple weeks ago. They do look good.
Was it a wide body or regular?
@@lmjames33 Was a new Scat non widebody
All the widebody cars should come with that. That's a nice feature of the camera catching the bumper now.
It is a nice bonus feature. Putting as a standard wouldnât be good Iâm finding a lot of people donât like this spoiler type
Long time no see... Here is a funny story! Appointment to have the rear view camera replaced on my 2019 Shaker. Long story short... "they don't know how... to remove the spoiler". Started talking about prying bars and afterwards sending it to a body shop for damages caused by the prying bar and on and on...". Seriously? OCD here, with 23K the granite paint does not have a single swirl! [well the front half of the car is wrapped]. I happily stumbled on your video which I sent them the link so maybe they can learn something but now real nervous about them doing it some day!!! I cant remember if this is a new car for you or the same from about a year ago. Always wonderful videos.... Thanks.
Itâs so scary how the professionals donât know how to do this. This is why I just DIY even if itâs warranty.
I hope they work this out without taking a jackhammer to your trunk đ€Š
@@WorkPlayDrive I am with you on that but they have the new camera! If they let me in their shop I would show them. Alternatively I think I am going to remove it myself, and just as f formality have then change the camera. Dodge is giving them 20 mns of shop time! Funny! Thanks again.
Another great video!
Great Video and Breakdown.... I'm still on the fence on this spoiler though
Yeah i was on the fence for a while. it took seeing it in person to instantly make me want one.
Great âhow toâ vid! Thanks!
Glad it was helpful! Thank You
Thanks, I won't be ticking that one in the option box.
THANKS !!! For just under $600 I have mine coming !!!
đđ
Beautiful! Went to East Coast Moparts but the site said that awesome spoiler wouldn't fit my '16 SRT 392.
Same here for my '18 scatpack. That's why I haven't ordered it yet. But in his comments he says '15 and up so..
Thanks, good job on the video.
Thank you!
Nicely done!
Thank you!
omg so much better then the other spoiler ....
Thank you đ
Watching your vid as we speak, installing mines in a bit
Hope you enjoy the look as much as I do.
Would recommend plugging up and testing the new camera before you remove the old one so you can ensure you won't have issues with your freshly mounted spoiler.
Thatâs is an awesome tip I failed to mention. đ
Great video...looking to do some small upgrades on my 18 Challenger Scat Pack...this looks easy enough. Great price on spoiler. So funny on Dodge build and price, they have this spoiler for $995, lil pricey guys LOL
Yep adding at the time of purchase was almost $1K itâs crazy.
I want that spoiler so bad!
Will probably be the next thing I get.
Iâm really glad I got it too. I think it looks awesome.
Great video! Thank you!
Thank You đ
Mike, seems like you are always a step ahead of me on upgrades ;) been eyeballing this one, could you comment on if that back angle does a superior job is displacing water around the backup camera lens, that is a common issue with the other designs. Also, does the camera appear better? My cam does this strobing/flicker thing at night and looks grainy.
Check back in a week, It has not rained yet ;) the camera quality appears the same regarding the night flicker, but the Angle is so much better now that it includes the bumper.
DAMN IT! ONCE AGAIN THIS CHANNEL COSTING ME MONEY!!!! lol great video and attention to detail always the best!
So sorry :D
Work Play Drive Iâve followed you since the Barton shifter install as a diy in the driveway! And I still love it every shift I row! Many mods later Iâm still following what you do, thanks for the through install video!
Thanks man I appreciate the love ...and I miss the hell out of my barton
Work Play Drive itâs one of if not the best mods Iâve done besides a cam upgrade but thatâs different... Even your seatbelt removal video helped me a ton to be able to install the dodge official seat delete! The Barton feels locked and loaded and I use it everyday when I drive and itâs been in ever since you recommended it in your review! Thanks for the awesome details for installs!
Thank you!! Sorry I missed this one for some reason CZcams put it in my spam :/
Like the new spoiler, maybe it will fit on my sxt
Love that spoiler!!!!
Me too đ
Looks great.
I'm going with carbon fiber accents on my Scatpack. Going to start on it next season. She's going into storage soon đŁ
What Carbon fiber maker/Brand are you going with. A friend of mine just completed his car and after quite a few failures he went with Anderson Composits and the look and fit was amazing.
@@WorkPlayDrive I'm not sure who I'll use yet. I need a splitter, spoiler and defuser. I'm not adding the big flat carbon splitter under the stock one. I want a replacement carbon splitter. I'd like to find replacement rocker covers and rear facia pieces as well.
I'll have to check out the company your buddy used though. Thanks for the heads up. Great videos by the way, just came across your page recently. Good stuff.
As we are looking for the mat agent,I think you can think it over.
I want this on my 2014 SRT8!
I just spoke to a 2014 Challenger Shaker owner and they said it was a direct swap using the factory holes on his.
Would this fit my 2018 challenger scatpack? I looked into it and it says it wont but I just wanted to double check.
Looking to buy a 2021 scat pack widebody ...... this is a Factory option for $995.00 ....... thanks you just saved me money
Oh wow that went up before it was $690
After seeing your car with and without the new spoiler I must agree I like the new one more. Nice install video. Did the new spoiler change the volume of dirt that collects on the rear fascia and bumper cover?
Thank you. I heard it makes a difference. Iâll know more next week when Iâm driving to and from work.
Nice work, man. I was going to wrap my OEM spoiler until I seen this video. Will complete after replacing the 2 piece rotors up front. đđŒ
Thanks bro
âšNice Vidâš , Can you possibly do a vid on how to replace the ac blend door actuator? I was having difficulty on the process?
Thank Youâš
Iâll consider it in the future if mine ever quits.
awesome installation video, quick question: do you think a 2016 scat pack emblem would fit on that srt spoiler ?
Itâs possible but you may need a thicker backing tape to account for the slight curve in the spoiler
So im finally about ready to install my spoiler that's been sitting around in my mancave (busy with work, life and sadly funerals). And to my surprise no hardware. Just the spoiler bagged 3 times inside a box. I don't have a spoiler to swap out hardware. So here's my question. What's the size of the nut that bolts on the ends. And where can I find it. Thank you so much in advance.
Can you please do a video for a proper locking gas cap?
Does any know if I can retrofit this to my 2012 rt it has a spoiler donât know if itâs factory but the camera isnât working so I thought if I had to remove might as well change spoiler
They need a carbon fiber spoiler..
will this fit on a 2010 dodge challenger?
Can you put that on a v6 challenger my back camera doesn't make a sound when close to something while reversing is it still compatible?
Got to have that spoiler weâre can I purchase it thanks
Looks great! Heard it has less downforce tho
Got any details or a source for this?
I heard that actually this srt spoiler produces less downforce on high speeds than the original hellcat spoiler because the original spoiler has a higher lip than this one does. This one's only for styling and the better back up camera
I've heard both sides with no data to back it up. I'm hoping to find some details on the subject. Right now most of the stuff I'm reading from "self proclaimed experts" it's looking like it was setup for less drag and higher top speed.
Wondering if youâre gonna do a video on a tazer install on your widebody
Yes, I'm going to be getting to that soon, I have the double bypass from my Scat to install.
very nice video. Have you seen or clocked any differences between the 2 spoilers other than the looks?
No noticeable differences in my use case. I donât have enough data before/after nor do I race enough to have any sort of consistency.
This one for me was just for looks.
Just want to say that I love the channel & how precise you explain stuff. Just wondering if the camera is removable from the old wing ? I order a scat pack from the factory & the dealer never order my SRT PERFORMANCE SPOILER. I found one for $250 but it has no camera.
Iâm sure it is as itâs a separate panel. I didnât look to see if it clips in or screws in from the inside of the spoiler.
... and Thank you đ
Great video as always! How easy would it be to swap out the camera? I have a hellcat spoiler lined up but it doesn't have the camera installed so looking to keep my sock RT camera. Can't seem to find any videos on thatđą. Thank you for all your awesome content.
Not sure, but it looks like the assembly pops out, as long as it's a factory spoiler that someone removed the camera from you should be fine. If it's aftermarket with no camera hole it may be tricky to get it aligned and looking good.
@@WorkPlayDrive thank you! It's a factory hellcat spoiler
Would it fit an sxt
Will this fit on a 16 r/t?
Hi, do you happen to know if the spoiler installed covers the same part of the trunk as the previous spoiler did? My challenger has some rock chips and damaged paint which are covered by the OEM one (previous owner apparently masked the issue by installing a spoiler) and I wondered if it would sit the same to avoid repainting the trunk.
Can I get a better quality of back up cam if I swap a back up cam on 2015 Chally to this new performance spoiler??
All the back up cam on 2015 Charger and Challenger are pretty bad.
Just got answer from here. Same quality but better view!
Wil thid fit my 18â challenger sxt?? It says it doesnât but the 19 sxt does.
If your SXT has the performance spoiler (The one he took off) Yes it will fit but if u have the small spoiler I belive u have to drill holes to make the redeye spoiler fit
wondering if they have made LED side markers for this model yet?
I havenât seen anything yet. Canât wait though.
Spoiler looks cool, but wiring looked a little tight though.
east coast moparts is trying to sell me the one on my 2016 scat pack ? And says this will not fit my car is this true?
Which rear diffuser is that?
Wow what a great price. I went online store says wont fit my 15 392 challenger. Is it all the same camera connection?
Yes Iâm familiar with 2015 and up and itâs the same connector on these models.