CrystaLac Clear Wood Grain Filler Overview and Tutorial

For the Technical Data Sheet or more information please visit: www.CrystaLac.info
Skip to 5:56 for basic overview
CrystaLac CLEAR Wood Grain Filler dries virtually transparent. That means that every bit of the wood’s color (stained or not) comes through brilliantly. Filling the wood grain before top coating, helps to eliminate those distracting little pock marks where the finish didn’t completely fill the pores. Simply rub it in and trowel it off to remove the excess. Paste left behind in the pores will level the surface, so you can lay down a silky, glass smooth finish.
You can tint it with CrystaLac Concentrated Liquid Pigments, water soluble dyes or just a dab of latex paint colorant (available at most paint stores).
CrystaLac Wood Grain Filler is compatible with most topcoats. It is recommended to check compatibility on a scrap piece of wood before doing an entire project. Shellac cannot be applied over the Grain Filler. Harsh lacquer solvents can melt the filler if applied to heavily.
Purchase Here:
thecrystalacstore.com/product...

[@woodfinishingwithcrystalac6787]

Skip to 5:56 for overview of Basics

[@mattlamborn5673]

Curious as to why sanding sealer before stain...stain will absorb into the sealer?

[@Voartist]

Me too. I thought sanding sealer went on just before the finish coats, such as guitar lacquer. First I've heard of this.