Avantco ice machine troubleshooting and repair
Vložit
- čas přidán 12. 05. 2024
- I received this Avantco ice machine as a gift and it wasn’t working when I received it. I went through some troubleshooting procedures to determine why this Avantco ice machine wasn’t working. Found out there were three different problems. I fixed a refrigerant charge issue, a drain plug problem and a curtain switch malfunction. This Avantco ice machine is now up and running and making ice.
🇺🇸❄️👍💪 great work thanks for sharing
Shine on!
Great video and thank you for taking the time to explain everything .
You are very welcome. Hope it helped.
Nice video. Good job. Great work. Thank you for sharing
Thanks. Thank you. Thanks again. Hope you have a nice weekend.
Thanks for sharing. Tony from Houston
My man Tony! Heard you had a storm or something. Hope y’all are safe.
👍👍👍
💪🛠️
Great video. Thanks for sharing!
You’re welcome!
Great job on this one
Thanks bro!
I think it’s more dangerous when manufacturers don’t put service fittings on r290 / r600 systems. One of the bigger commercial brands over here put a suction and liquid line access port, so if you’re unsure whether it’s SOG or a restriction you can atleast blow through the capillary. The problem with sweating in a suction port is that if your capillary is blocked you still have a system full of 290. I’ve done the same as you did here though also 😄👍🏻 good video mate
I agree. There should be ports. Specifically designed ports for r290.
Definitely should be ports on these. They just need to design ports that work well with r290.
nice find,
Little bit of this and a little bit of that.
Compelling!
Lol
Yoooo that got r290 in the ice machine now 🤦🏾♂️🤦🏾♂️🤦🏾♂️🤦🏾♂️🤣🤣 like wtffff
That’s the future. More and more manufacturers are using R290
@@IceMachine411you’re right man I just have to adjust ! Part of the trade
For real. Me too. Most machines will be 290 before too long.
How does this Avantco determine when to harvest?
I think it’s the water float. When there’s no more water in the trough it gos into harvest.
@@IceMachine411 I tracked down the manual online and it would seem to be time based after evap reaches 32F. I presume this as the adjustment on the "digital" thickness adjustment equals "+/-90 seconds to freeze cycle". I'm not sure if I trust that method.
What, no parts or tech support on Advatco? Im not surprised.
Small things like that make all the difference in the world. We don’t by products we can’t get parts and support for. It’s a solid machine though and affordable.
We do have tech support, we do avantco, CPG, Narvon, vacpack-it, mainstreet etc pretty much all webstaurantstore products.
You will call readykitchenwarranty for tech support, warranty or parts ID
Great information!!! Can you post the phone number?
Weird looking cat
lol. Yup.