Alfa Romeo Giulietta Annoying Dashboard Rattle Fixed

Sdílet
Vložit
  • čas přidán 6. 05. 2021
  • In this Alfa Romeo Giulietta video we look at how to fix the annoying rattle / vibration from the dashboard.
    #Alfaromeo
    #Giulietta
    #Vialettotony
    #Driveway
    Please like & Subscribe to the Channel to see other "how to" & "repair" videos & "things you wish you knew earlier", that are up already, and getting posted soon. Everything from Battery replacement, Trunk / Boot Wiring Looms, Air Filter, Cabin Pollen Filter, MAF Mass Air Flow Sensor Fix Cleaning, PCV valve, Fuel / Gas Filter, Steering Fault Codes Fixed, Passenger Airbag Light, Electric Windows, Anti Rollbar / Sway bar Bushes, Drop Links, Brake Discs, Brake Pads, Brake Fluid Flush, Rear Springs, MOT Preparation, and a whole lot more to come. 2.0 JTDM 170
    In questo video dell'Alfa Romeo Giulietta vediamo come riparare il fastidioso rantolo / vibrazione del cruscotto.
    #Vialettotony
    Per favore, iscriviti al canale per vedere altri video "come fare" e "riparare" e "cose ​​che vorresti sapere prima", che sono già attivi e verranno pubblicati presto. Tutto, dalla sostituzione della batteria, cavi del bagagliaio / bagagliaio, filtro dell'aria, filtro antipolline dell'abitacolo, pulizia fissa del sensore di flusso d'aria di massa MAF, valvola PCV, filtro carburante / gas, codici di errore dello sterzo fissi, luce airbag passeggero, finestrini elettrici, barra antirollio / oscillazione Boccole della barra, tiranti, dischi dei freni, pastiglie dei freni, lavaggio del liquido dei freni, molle posteriori, preparazione del MOT e molto altro ancora.
    W tym filmie Alfa Romeo Giulietta przyjrzymy się, jak naprawić irytujące grzechotanie / wibracje z deski rozdzielczej.
    #Vialettotony
    Proszę polub i zasubskrybuj kanał, aby zobaczyć inne filmy „jak” i „naprawiać” oraz „rzeczy, które chciałbyś wiedzieć wcześniej”, które już są dostępne i zostaną wkrótce opublikowane. Wszystko, od wymiany akumulatora, wiązek przewodów bagażnika / bagażnika, filtra powietrza, filtra przeciwpyłkowego kabiny, czyszczenia czujnika masowego przepływu powietrza MAF, zaworu PCV, filtra paliwa / gazu, naprawiono kody usterek układu kierowniczego, oświetlenie poduszki powietrznej pasażera, elektryczne szyby, stabilizator poprzeczny / kołysanie tuleje, drążki wahliwe, tarcze hamulcowe, klocki hamulcowe, płukanie płynu hamulcowego, tylne sprężyny, przegląd techniczny i wiele więcej w przyszłości.
    Dans cette vidéo Alfa Romeo Giulietta, nous examinons comment réparer le hochet / vibration gênant du tableau de bord.
    #Vialettotony
    Veuillez aimer et vous abonner à la chaîne pour voir d'autres vidéos "comment" et "réparer" et "choses que vous aimeriez savoir plus tôt", qui sont déjà disponibles et seront bientôt publiées. Tout, depuis le remplacement de la batterie, les faisceaux de câbles du coffre / coffre, le filtre à air, le filtre à pollen de la cabine, le nettoyage du capteur de débit massique d'air MAF, la soupape PCV, le filtre à carburant / gaz, les codes de panne de direction fixes, l'éclairage de l'airbag passager, les vitres électriques, la barre anti-roulis / anti-roulis Bagues de barre, biellettes de suspension, disques de frein, plaquettes de frein, rinçage du liquide de frein, ressorts arrière, préparation du MOT, et bien d'autres choses à venir.
    In deze video van Alfa Romeo Giulietta kijken we hoe we de vervelende rammelaar / trilling van het dashboard kunnen verhelpen.
    #Vialettotony
    Like & Abonneer je op het kanaal om andere "hoe" & "repareer" video's & "dingen die je eerder wist" te zien, die al klaar zijn en die binnenkort worden gepost. Alles, van het vervangen van de batterij, kabelbomen voor kofferbak / kofferbak, luchtfilter, cabinepollenfilter, MAF-luchtmassameterreiniging, PCV-klep, brandstof- / gasfilter, stuurfoutcodes verholpen, verlichting airbag passagier, elektrische ramen, stabilisatorstang / zwaaien stuurbussen, valschakels, remschijven, remblokken, remvloeistofspoeling, achterveren, APK-voorbereiding en nog veel meer.
    In deze video van Alfa Romeo Giulietta kijken we hoe we de vervelende rammelaar / trilling van het dashboard kunnen verhelpen.
    #Vialettotony
    Like & Abonneer je op het kanaal om andere "hoe" & "repareer" video's & "dingen die je eerder wist" te zien, die al klaar zijn en die binnenkort worden gepost. Alles, van het vervangen van de batterij, kabelbomen voor kofferbak / kofferbak, luchtfilter, cabinepollenfilter, MAF-luchtmassameterreiniging, PCV-klep, brandstof- / gasfilter, stuurfoutcodes verholpen, verlichting airbag passagier, elektrische ramen, stabilisatorstang / zwaaien stuurbussen, valschakels, remschijven, remblokken, remvloeistofspoeling, achterveren, APK-voorbereiding en nog veel meer.
  • Auta a dopravní prostředky

Komentáře • 48

  • @kuba7329
    @kuba7329 Před 3 lety +13

    Tony you're a life saver, thought I had to take the whole dash out😂

    • @vialettotony
      @vialettotony  Před 3 lety +3

      Haha. Hope it helps. All the best and thanks for watching.

  • @goodo5691
    @goodo5691 Před 3 měsíci +2

    i have a little industrial deafness..never had a problem with vibrations in the dash....THEN i had a hearings aids, on the drive home all i heard was rattles and dash vibrations:):)

  • @josephamato9346
    @josephamato9346 Před 2 lety +4

    Unreal! Thanks Tony. This worked (eventually). I tried a number of times using different types of felt / foam tapes. But still was getting the vibration at low revs. Realized eventually that one of the corner clips had bent out of place by a couple of millimeters so wasn’t clicking in properly. Gently pushed the clip outwards and tried one more time with tape similar to this video and noise was finally gone! Very happy

  • @neilfacey341
    @neilfacey341 Před 3 lety +3

    Great video Tony, keep them coming please! I have that annoying rattle, going to give this a try.

    • @vialettotony
      @vialettotony  Před 3 lety +2

      Thanks Neil. Appreciate the positive feedback. All the best.

  • @liberatodecesare2081
    @liberatodecesare2081 Před 3 lety +4

    Well done Tony, another great vidio(I have subscribed)

    • @vialettotony
      @vialettotony  Před 3 lety +1

      Great, glad you like it. Thank you. All the best.

  • @mrleoo
    @mrleoo Před 3 lety +2

    Thanks Tony Good Job

  • @michaelstaley2241
    @michaelstaley2241 Před 3 lety +2

    Excellent content simple fix…

  • @jonpeters1985
    @jonpeters1985 Před 3 lety +2

    Great job tony!

    • @vialettotony
      @vialettotony  Před 3 lety +1

      Thanks JP. Appreciate every comment and view. All the best.

  • @Luis_Alcaide
    @Luis_Alcaide Před rokem

    Worked for me too, I had to remove and isolate the plastic below the steering wheel to, it’s fantastic now

  • @mdsabih
    @mdsabih Před 2 lety +1

    Great, thank you!

  • @GTakos89
    @GTakos89 Před 3 lety +1

    That's the culprit then ! Thanks Tony !

    • @vialettotony
      @vialettotony  Před 3 lety

      Haha.... damn thing right. Hope it helps. All the best.

  • @kamiguel1
    @kamiguel1 Před 3 lety +1

    Thank s Tony you are the men sr

  • @steasstylianos2705
    @steasstylianos2705 Před 3 lety +1

    Hello Tony; Excellent videos! Could you make a video about the replacement of the Clima temperature sensor on the mirror? I think it is a common problem that I have and the garage told me that I have to replace the whole mirror...

    • @vialettotony
      @vialettotony  Před 3 lety

      Hi Steas. Thanks for watching. Really appreciate it. I’ll add it to the growing list of videos... I don’t have a problem with mine, but I should be able to do something to at least show how it comes apart and goes back together. Might be a while, but I’ll see what I can do. All the best.

  • @michalchlup6758
    @michalchlup6758 Před 3 lety +3

    I was wondering, how this cover is removed, since my is also rattling from time to time. Will give it a go. Also what I like is to put some fabric tape (used to insulate wiring looms) on the edge points where plastic touches other plastic/leather/vinyl, etc. Had quite good success with it on the plastic body of the window steering panel and decorative trims, where it did remove much of the squeeking, etc.

    • @vialettotony
      @vialettotony  Před 3 lety +1

      Hi Michal. Applying the tape was not a problem at all. It worked really well and is still keeping it quiet. Hope it helps. All the best.

  • @connoranderson4327
    @connoranderson4327 Před 2 lety +2

    Thanks Tony! Just picked up my Guiletta a couple weeks ago and was experiencing the rattling noise. This video helped fix it. 👍
    My Alfa makes a beeping noise when you unlock and lock it, any way to stop the beeping noises?

    • @vialettotony
      @vialettotony  Před 2 lety +2

      Hi Connor. Congratulations on your new car 😀. The beeping is standard on all Giulietta, and even Mito’s I believe. You’ll soon start to hear other peoples 😉. The only way of turning it off is by changing the vehicle settings to Belgian I think it is. Most new owners worry what their neighbours will say, but I’ve never heard of anyone getting complaints in nearly 9 years of ownership.
      Hope that helps. Thanks for watching and subscribing if you have. Really appreciate it 👍

    • @franciscgedeon9237
      @franciscgedeon9237 Před 2 lety +1

      To answer the beeping question, the only way to get rid of it is using a diagnostics tool (MES for example, and the yellow cable adapter) to reprogam the alarm to a different county - usually Netherlands works to permit silent locking of the doors. For this you need to contact the dealer and ask for the alarm security code, if you find a nice person they'll do it over the phone, sometimes they ask for 30 quid fee and proof that you own the car (V5 would do), sometimes they don't. Most dealers refuse to do the job themselves, but you never know. Once you get hold of the security code, it's easy peasy with the software. Caveats: This is NOT the security code for the car key fobs that you'd need to program/cut new keys, NOR is it the radio unit security code, dealers will confuse them, the Alfa dealer software will pop the right alarm code base on the car VIN, you just need to know what you're asking for and stick to it. Also this won't change the way your alarm behaves, you still get the theft protection, it's just the annoying door beeps that go away, so no need to go talk to the insurance provider. Hope it helps.

  • @RixiV11
    @RixiV11 Před 3 lety +2

    I had lots of vibrations on Fuse cover, under steering wheel. some teeths were broken and i just stick foam on edges

    • @vialettotony
      @vialettotony  Před 3 lety +1

      Great job. If you can identify and fix a vibration it makes all the difference. Thanks for watching and subscribing (if you have). Really appreciate it. All the best.

  • @sabilbazarghan4326
    @sabilbazarghan4326 Před 3 lety +1

    Hi, i did exactly what you did but the rattles still there on its more into the left side of it/ in front passenger seats ? Any recommendations?

    • @vialettotony
      @vialettotony  Před 3 lety +1

      Get someone to go out with you and help pinpoint it exactly. Then you’ll know where to start looking. Difficult to say otherwise. Thanks for watching and subscribing (if you have). Really appreciate it. All the best.

    • @sabilbazarghan4326
      @sabilbazarghan4326 Před 3 lety

      @@vialettotony i’ll do that ! Thanks for the tip👍🏻

  • @Red_Ford
    @Red_Ford Před 2 lety +1

    I have the same issue. It's time to fix it. But I think that the problem in my case is much more complicated, because probably the main engine mount should be upgraded to newer version. Do you ever think to change the engine mount in your Giulietta? 😁

    • @vialettotony
      @vialettotony  Před 2 lety +1

      Hi Red Ford. Not currently, but at some stage I really want to. Maybe this summer?? We’ll see if people keep watching, liking and subscribing I may be able to afford parts 😂👍
      All the best 👍

    • @Red_Ford
      @Red_Ford Před 2 lety +1

      @@vialettotony I will start with changing the coolant container because it is full of micro cracks and the fluid slowly dissapear. Some people say that this is another common issue in Giulietta.

    • @vialettotony
      @vialettotony  Před 2 lety +1

      @@Red_Ford remember to look out for the Opel/Vauxhall equivalent for a reduced price 😉. I believe it’s exactly the same item but the Opel one has an extra bracket that needs removing before it will fit. All the best 👍

    • @Red_Ford
      @Red_Ford Před 2 lety +1

      @@vialettotony You mean coolant container? In my country we have only Opel instead of Vauxhall 😉

    • @vialettotony
      @vialettotony  Před 2 lety

      @@Red_Ford ahah I see. Sorry I thought you meant the EGR cooler. No the coolant expansion tank is bespoke I believe. Have a great day. All the best 👍

  • @andrewcumming4018
    @andrewcumming4018 Před 2 lety +1

    Thank you Tony, really interesting. If I may I'd like to ask why the music behind your voice? I'm a really deaf old sod and the music makes it hard to hear you.

    • @vialettotony
      @vialettotony  Před 2 lety +1

      Hello Andrew. Thank you for watching. Really appreciate it. I always add music to lift the videos otherwise they can seem a bit slow and dull. The audio levels can be a challenge though as when I edit the videos the music doesn’t seem that loud to the point it can hardly be heard, but then when it’s played back through as different device it seems louder. I’ve played with it a bit on different videos making some quieter/louder. Ideally I’d like to get some editing software that allows me to change the levels in each scene, but as ever there’s costs associated with that. I really enjoy making these videos, but it’s quite expensive with parts and tools and I’m yet to earn a single penny from it 🙄. Fingers crossed I’ll find a work around one day.
      Thank again, stay healthy and enjoy the rest of the videos. 👍

    • @andrewcumming4018
      @andrewcumming4018 Před 2 lety +1

      @@vialettotony hey Tony thank you for replying. The music thing is only a frustration since I lost my hearing acuity. I truly enjoy ur videos and I don't even own a car. I love Alfa's and my last car was a mito. I enjoyed it but it had the twin clutch and I want a manual next car. I live in outback Australia and Alfa's here have a terrible reliability reputation. My mito was great no problems. I'm seriously thinking of a guiletta, 1.4turbo. The clover leaf is very exy here. I'm only looking at secondhand cars. Being retired I have no idea how you presenter's get money out of your videos, I'm assuming it's to do with numbers. You make all the videos so interesting and achievable. Thank you and I wish you well.

    • @vialettotony
      @vialettotony  Před 2 lety

      @@andrewcumming4018 that’s great feedback to hear you enjoy the videos even though you don’t have a car currently. Thank you. I always try to document each and every step to make it clear, and get lots of comments from people who have successfully fixed or maintained something which is always good to hear. I find the Giulietta very easy to work on to be fair. Really appreciate your time watching and commenting. Thank you again. All the best. 👍

  • @AutomotiveArchives
    @AutomotiveArchives Před 11 měsíci +1

    Do you know how to turn off the locking beeps on the car without a computer? Sick of getting in from work at 1am and waking up next doors dogs for the next hour 😂😂

    • @vialettotony
      @vialettotony  Před 10 měsíci

      It can done through diagnostic software, but requires you to configure it to Danish I believe. All the best 👍

  • @buchanan5985
    @buchanan5985 Před 3 lety +2

    Same problem

    • @vialettotony
      @vialettotony  Před 3 lety +4

      It’s amazing how many people have the problem and put up with it. Hope this will help. Thanks for watching. All the best.

    • @plandeka666
      @plandeka666 Před 3 lety +1

      I have vibrations in the roof above the gauge cluster. Anybody with the same problem? Only when the car is cold and it's cold outside. Maybe the engine mount under the electic box it's faulty?

    • @vialettotony
      @vialettotony  Před 3 lety +2

      @@plandeka666 yes I’ve had a vibration there before, but difficult to find as it’s only been once or twice. If it gets worse I’ll try and fix that too 😉.

  • @steviegbcool
    @steviegbcool Před 2 lety +2

    who would of thought one little bit of plastic make so much noise!