How to Mount your 75" Costco TV on the wall
Vložit
- čas přidán 8. 07. 2024
- In this video Andrew mounts a 75" Samsung QLED TV on the wall. He goes step by step and gives instructions. He uses the SANUS TV mount also from Costco.
Timecodes:
0:00 Intro
0:30 Whole project at 10x speed
1:01 Explain DIY project
1:57 Mark where mount on wall will be on studs
4:02 Pre-drill in studs
4:49 Use lag screws to secure to wall
6:42 Secure brackets to the back of the TV
10:54 Secure hinging part of the mount to the wall
13:45 Lift TV and mount on the wall
14:45 Check level on TV and adjust until level
Costco Samsung TV: www.costco.com/samsung-75%22-...
Costco SANUS Simplicity 37" - 90" Full-Motion TV Mount: www.costco.com/sanus-simplici... - Hudba
Great step by step instructional video. Now, we are convinced that we need to hire a Pro for the installation, securing the TV safely...
Thanks for the comment. I appreciate your support.
HANDY DANDY!! Found you in the nick of time! Almost made some major DIY mistakes. Thanks for the vidieo. Keep ‘em coming!!
Thanks for your support! Please subscribe and make my day!
Nice video. Thanks so much!
Bruce, thanks for watching! Subscribe for more DIY content.
Safety challenge. You’re concerned about hearing protection for less than 30 seconds of noise at possibly 100 db but you didn’t think about eye protection. Otherwise nice walk through of the installation.
Thanks for your support. I usually do a pretty good job wearing and recommending both ear and eye protection, but I fell short on this video. Good catch. I'll do better.
This wall mount does not seem safe like older models, if you look the whole tv is being held by the back plate and two tiny screws, I wonder why they switch to this style of mount. I had no choice but to buy this bc almost all mounts are like this now.
Hi. Mine seems to click in and very difficult to pull it out to swivel tv . It takes 2 people and very scary as we pull it so hard to release it I always think I might break tv. Am I doing something wrong?
hmm, it sounds like the TV may be too heavy for your mount. Be careful please!
Are you worried about the tv pulling off the wall since it’s not mounted in the middle of the wall mount?
Great question, Daniel. I'm not worried about it because the mount is designed to work like this. There are four sturdy lag screws that will hold the TV up, even when the TV isn't positioned in the middle of all four bolts. This is one reason this Sanus TV mount is so good-you can mount it on the studs and you're not limited to placing the TV directly between the studs. Speaking of studs, you're a stud for your support. Cheers!
Why didn’t you show the full swivel? You showed insulation but didn’t show how it functions which is more important
Great feedback. I totally should have. What an oversight on my side.
Can you do mine? Haha