Most Riders Fail To Do Before Each Ride!
Vložit
- čas přidán 23. 07. 2024
- ✅ Instagram: / motorcyclemecha
Ride at your own risk. Moto Mecha disclaims any liability incurred in connection with the use of the concepts outlined on this channel/videos. You alone are responsible for your own safety.
#mechanic #dyi #repair #motorcycle - Auta a dopravní prostředky
Just a few things amongst many you can check before you're rides. I'll post a more in depth bike inspection video (once a month) shortly! I really hope that more of us practic more safe riding! Stay tuned and safe travels!
Safety is paramount
Yes!
Oil level is another one I check before rolling out, too.
YES!
Awesome reminder and tips video, thanks for sharing!! 👍👍
Thanks!
That’s one clean moto!
My baby!
The tapping on the tires is a great tip, thanks
Yeah kinda neat huh!
T CLOCS made simple. Thank you and I really like your channel. It's appreciated!
Thanks!
Great advice! Thanks!
You’re welcome!
Good ideas!
Thank you! 😊
Nice bike (had a late 90´s 600) and wonderful tires.
Always good to remind of the essential things.
Most of us know of these checks. We just don´t do it due to the lack of discipline. I just look for petrol in the tank, oil on the chain, and air in the tyres.
Easy to get complacent, essential to stay diligent
great video. can you do one about when it is time to change the tires, chain, sprockets, brake discs, pads etc. ? thanks.
Ok I’ll add it to the list!
I got a 2022 street triple r. I was wondering if it Normal I having add a little oil every thousand or so miles. It looks like the oil gets a little below the line every thousand miles or so . I got almost 3k miles on the bike , had to add a little oil twice (very little )
Uhhm it might be burning oil, not sure it’s that’s typical for that bike or not. Glad you’re keeping a close eye on it tho! 👍🏻😁
@@motomecha530 thanks !
I think I'll take it in and have the dealer look at it. Appreciate your help.
My bike has a h.i.d low beam that's doesn't want to come quite frequently but I'm not sure if it's in the switch or where the problem might be. Usually after several minutes of the bike idling and me switching back & forth from low beam to high beam it will come on.
Problem is I can't trust it won't give me problems while riding, then only have high beams only. Which would get me pulled over and I don't need that.
So basically I just leave the low beam on.
My bikes headlights just stopped working completely. I am gonna check the fuses to see if I blew them
Replace it
Is it true that you shouldn't' have warm tires before inflate them? Today mine were low, so I went to the gas station where there is the compressed air thing, and my bf told me I should not drive more thank 2 km before inflate them. Is it a good rule?
Correct tire pressure should be measured away from any heat or sunlight for at least 2 hours. In cold weather it could be less. Riding only 2 km to get to an air compressor should be fine.
I believe the answer to your question is that tires read a higher pressure hot, then cold. The factory does not specify at which temperature to set the pressures. I believe you should inflate the tires to the correct tire pressure cold. Also, keep in mind the gas station tires pressure gauges are usually very inaccurate!
Thank you!
Hi Mike. Why are you have a Hungarian surname? :)
My dad is from Budapest :)