Harmar AL100 Vehicle Lift install - Featuring Automatic lock-down arm and swing-away
Vložit
- čas přidán 23. 09. 2022
- Today we install a Harmar AL100 scooter lift with automatic lock-down arm and swing-away arm and a customer’s Hyundai Santa Fe. For more information and compatibility for your vehicle please email sales@lasvegaslifts.com or use the link above to check on your vehicle and mobility device is suitable to carry an external or internal lift.
Harmar Vehicle Compatibility Calculator: www.harmar.com/calculator/
Visit our website: www.lasvegasscootersandlifts.com
Facebook: / lasvegasscootersandlifts
Instagram: / lasvegasscootersandlifts
DISCLAIMER: Video is for entertainment purposes only. Repairing your own device could invalidate your warranty, I cannot give individual advice on how you can repair your scooter, wheelchair or projects.
#scooterlift #harmar #mobilityscooter #scooterrepair #scootercarrier #liftinstall #lasvegaslifts
Great video. Made installation a breeze. Thanks a lot.
Glad it helped. 👍
I think I have mentioned before that I have been working privately as a hobby out of my home garage with handicap mobility equipment here in Florida starting my 13th year now. I mostly work with used equipment but HAVE bought 2 brand new Harmar AL-100s in the box and have never seen the emergency crank for if the power should fail. What I do is buy cheap (used) 3/8" drive ratchets and 3/8" hex sockets at car shows and provide them to my customers with each lift I install.There is a plastic plug in the top of the motor box that is removed and there is a 3/8" male hex to put the 3/8" socket on to raise or lower the lift, again in the event of a power failure. I wrap them in a soft micro-fiber cloth and put in the driver's side door panel pocket. I also believe (And I have told Harmar) that the light on the lift should have a clear cover and utilize a bright LED bulb to aid folks in loading and unloading in the dark.
Hi Richard, great idea. Do you have an account with Harmar? as I know they were really strict with us and who they give accounts out to.
@@lasvegasscooterslifts No account. I'm just a private guy working out of my home garage with a great automotive mechanical back ground.
Thanks for a great video. Is anything like it available in the UK?
Not that I know of
very informative video. I lost the safety pin for the swing away. any suggestions for where to buy a new one?
Hi Scott, you can purchase a Pride pin from our ebay store that can be used to replace your Harmar swing-away pin.
www.ebay.com/itm/276107977946
For the license plate light, does the wiring harness power that light, or do you have to use the wiring harness that is usually installed with the trailer hitch for trailer lights?
Hi Paul thanks for the question. The wiring harness on the lift section has a dedicated plug which goes into the trailer hitch wiring harness (four pin connector, not the round type) on the vehicle which controls the lights, turn signals etc. So, when you turn your lights on the plate light on the lift will illuminate at the same time.
@@lasvegasscooterslifts thanks for the information. My hitch doesn't have a plug for the trailer hitch wiring harness, it's simply the hitch itself. Is their a fix for that?
You could try going to somewhere like U-Haul and see if they can fit the trailer wiring kit for your lights.
My AL-100 platform is now bent. When lowering my scooter the left side reaches the ground first. My truck was down for a year, soon as I began using this new lift the platform bent and looked warped. I have a Pride ZT10 that has two motors on the scooter why it can turn sharp on a dime and have four wheels. The ZT10 total weight is 250 pounds, which sounds fine below the weight limit, but the problem is the majority of the weight is the two motors in the back of the scooter, so way more weight on the left side where the AL100 warped. But paying $3,100 for this lift I am upset. No vehicle hit it, I added brakes and turn lights to the lift keep people back further. I can park the scooter on the AL100 opposite make the lift warp the other way or catch it when it is back level, then have a fabrication shop strengthen the lift with more cross members, but a customer should not have to do that.
Have you reached out to the place that installed the lift or to Harmar?
Is there a remote controll w this lift I need a rolator walker also to assist w me walking
No, the only lifts that offer an optional wireless remote operation are the internal style and boom lifts.
@@lasvegasscooterslifts I was successful in installing (believe it of not) a boat anchor winch wireless remote on a Harmar AL-100 a few years back. Worked GREAT but the one I bought could only have 1 remote at a time which I think is stupid-its like having only 1 key to something.