My e60 dpf back pressure was not reading anything on tester and sometimes i had an error about that so i changed the sensor and now it's working, so it's better if you periodically check for error because this sensor is responsable for DPF regeneration,the car won't show anything on dashboard ,if you want the DPF to last long i advice that 💪
Sorry, but the DPF is not to trap unburnt fuel particles. It is to filter out the soot particle after the fuel IS burnt. Just like you would clean out the chimney if you had a coal or wood burner in your home.
@mr-fix The best app works with carista for android.....At the DPF back pressure sensor calibration it asks for min and max value, do i really need to calibrate the new sensor that i have just installed??
A co powiesz o ciśnieniu skorygowanym ? Od jakiegoś czasu mam problem z częstym wypalaniem wypali się ciśnienie spada do 5hpa i po 50 60km rosnie do 60 pp czym wypala ponownie ciśnienie skorygowane pokazuje 21000 hPa p
Very clear instructions, thank you
Happy to help!
Hi, thank you for this movie, what's the maximum value of Ash for BMW engines?
Groovy trousers
My e60 dpf back pressure was not reading anything on tester and sometimes i had an error about that so i changed the sensor and now it's working, so it's better if you periodically check for error because this sensor is responsable for DPF regeneration,the car won't show anything on dashboard ,if you want the DPF to last long i advice that 💪
Very good 👏👏👏. Thanks for the video.
Sorry, but the DPF is not to trap unburnt fuel particles. It is to filter out the soot particle after the fuel IS burnt. Just like you would clean out the chimney if you had a coal or wood burner in your home.
At 15% may car started the regeneration, i drove 25% and the DPF 0% soot level , 60km/h ,RPM 2500 , 520d e60 2008
Using GSCAN theese are my trash values: Idle: 157 mbar 2000rpm: 773 mbar last step: -440 mbar
I connect to my car but the dpf button is not active. Why?
What can I do if ash level is 52grams and dpf regeneration is very often?
Hi I have a 257800 code which is related to this would it be a faulty sensor? Thank you
vil this app work with 2006 bmw e87 with m47 engine
@mr-fix The best app works with carista for android.....At the DPF back pressure sensor calibration it asks for min and max value, do i really need to calibrate the new sensor that i have just installed??
hi, how many operating hours (in bimmer-tool) do you have on this run?
Lambda value is correct when is 3?
Good job, well explained video.
jaki powinien być przedział ciśnienia dpf?
My back pressure is currently reading zero, what does that mean?
Sensor mate
Bad backpressure sensor or gutted dpf
Is there any app to do the same for VW?
Well, OBDeleven kinda is.
@@mrfixpl how do you do regeneration on obdeleven for vw
A co powiesz o ciśnieniu skorygowanym ? Od jakiegoś czasu mam problem z częstym wypalaniem wypali się ciśnienie spada do 5hpa i po 50 60km rosnie do 60 pp czym wypala ponownie ciśnienie skorygowane pokazuje 21000 hPa p
The same problem. Do you fix that?
Cześć, mam to samo od jakiegoś czasu. Doszedłeś co było powodem częstego wypalania? Z góry dzięki i pozdrawiam