FlexPVC - One way to do an angled 4 way (or 5 way).
Vložit
- čas přidán 21. 09. 2023
- Here I'm showing you have to get an angled 4 (or 5 way) fitting. In this case it's 1/2" but you can do this all the way up to 2". The parts you will need are the 4 way (426-xxx) and the spigot elbow (427-xxx or 442-xxx), where xxx is the pipe size. Ie, 005 for 1/2", 007 for 3/4", 010 for 1", 012 for 1-1/4", 015 for 1-1/2" and 020 for 2". So this is showing a 426-005 + 427-005 on the left and a 426-005 + 442-005 on the right. Hope you find this useful.
4 ways here: flexpvc.com/cart/agora.cgi?pr...
Spigot 45s here:
flexpvc.com/cart/agora.cgi?p=...
Spigot 22s here:
flexpvc.com/cart/agora.cgi?p=...
Call or email if you have questions. Yes you can use a 5 way the same way. 425-005 + 427-005 or 425-005 + 442-005, for example. Those would go "in the middle" of your structure. The 426-xxx would go on the end. You can see this on our project page:
flexpvc.com/Projects/Projects...
Scroll down to the Chicken Cage. - Jak na to + styl
Also showcase those hard to find 4 ways for furniture or structural builds.