I wish I had not seen this video.................Now I can see with plain and simple instructions how to make a pair of speakers and can't avoid the temptation of having a go myself...........Top Chap
13:18 very interesting and good way to isolate the internal panels of the box! I call it "old school". thanks for share! good work. my technique is almost the same, just the difference is to add aluminum between "carpet" and fiber. sometimes my layers are: cardboard/alumium/fiber.
@@whoswho6641 to isolate the magnet. In the model I saw, being small speaker with a big magnet. I saw models like Sony just adding a metal cap over the speaker magnet.
Hola muy bueno tu trabajo podrias regalarme las medidas para hacerme unos para parlantes de 4" y uno para un subwoofer de 5" claro si no te incomoda , saludos desde cali colombia
Hello, you can visit my speaker store. We look forward to your arrival and our store address is listed below www.hiendchina.com queenway.it.aliexpress.com/store/1070003?spm=a2g0o.store_home.1000001.12.432464bbDVUo8U
Label on the magnet reads Mark Audio CHP70 - paper cone 70mm diameter. Nice little driver for a desk-top or nearfield application, but could certainly benefit with some help from a sub.
наполнитель гасит стоячие волны в корпусе т.е отражения от стен и т.д. если есть акустика без наполнителя попробуй одну обклеить войлоком 20мм или синтепоном и сравни пустую и с наполнителем разница на слух весьма ощутима
Thank you so much that you don't use loud songs during your video. I've always hate people adding songs. They sound like we're watching a "porn." Again, thank you.
I wish I had not seen this video.................Now I can see with plain and simple instructions how to make a pair of speakers and can't avoid the temptation of having a go myself...........Top Chap
Shit, I feel the same... How it can be so easy??
Thats true craftsmanship! Where you take alot of scrap pieces and laminate them together to make the panels.
Una pregunta, por que doble fieltro dentro de la caja del parlante? Excelente trabajo!! Estaria bueno una prueba de audio.
13:18 very interesting and good way to isolate the internal panels of the box! I call it "old school". thanks for share! good work.
my technique is almost the same, just the difference is to add aluminum between "carpet" and fiber.
sometimes my layers are: cardboard/alumium/fiber.
Why aluminium ?
@@whoswho6641 to isolate the magnet.
In the model I saw, being small speaker with a big magnet.
I saw models like Sony just adding a metal cap over the speaker magnet.
@@whoswho6641 I forget to mention, that "technoque" to shield the box I saw it in old magazine Popular Mechanics . 'O'.
@@georgemartinezza maybe it would be better just to shield the magnet..interesting
Nice.
de que medida son las bocinas ?
19:45 qual produto esta passando na madeira ?
Con tutta quell'attrezzatura si può rifinire molto meglio..
nice job
Hola muy bueno tu trabajo podrias regalarme las medidas para hacerme unos para parlantes de 4" y uno para un subwoofer de 5" claro si no te incomoda , saludos desde cali colombia
Hello, you can visit my speaker store. We look forward to your arrival and our store address is listed below
www.hiendchina.com
queenway.it.aliexpress.com/store/1070003?spm=a2g0o.store_home.1000001.12.432464bbDVUo8U
👍
How about a workbench?
Nice
So what drive units did you use?
Label on the magnet reads Mark Audio CHP70 - paper cone 70mm diameter. Nice little driver for a desk-top or nearfield application, but could certainly benefit with some help from a sub.
What adhesive did you use to glue in the front baffle ?
looks like PVA
@@voshche Probably mixed with sawdust from that wood
Why just a hole and no port?
Всё хорошо! Но не хватает демонстрации звучания этой акустики!
все делают из МДФ , а здесь дуб или ясень --- по идее звучать должны супер ---- жесткость железная
No crossover?
Какой звук даёт наполнитель который заложил внутр?
наполнитель гасит стоячие волны в корпусе т.е отражения от стен и т.д. если есть акустика без наполнителя попробуй одну обклеить войлоком 20мм или синтепоном и сравни пустую и с наполнителем разница на слух весьма ощутима
Thank you so much that you don't use loud songs during your video. I've always hate people adding songs. They sound like we're watching a "porn." Again, thank you.
That's random..
The video is interesting,what drivers did you use and how did you calculate the boxes?
This is a secret
@@jatza07 There is nothing secret that will not be revealed!
The drivers seem to be Markaudio 6p
Markaudio CHP-70 Gen 2
Guy didn't change his shorts since 2017😄
No dialogue !
After all that, no sound demo?!
czcams.com/video/SomDlf_tEgU/video.html 😉
it is fostex