How to Replace Front Right CV Axle Assembly 2009-2014 Nissan Maxima

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ic/1AACV00361
This video shows you how to install a new front right CV axle assembly from TRQ on your 2009-2014 Nissan Maxima. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2009 Nissan Maxima
2010 Nissan Maxima
2011 Nissan Maxima
2012 Nissan Maxima
2013 Nissan Maxima
2014 Nissan Maxima
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obrE/1AXAA00013
• Pry Bar 1aau.to/oXN/1AXAA00020
• 18mm Wrench
• 19mm Wrench 1aau.to/oZ5/1AXAA00010
• 16mm Socket 1aau.to/obFu/1AXAA00015
• 18mm Socket 1aau.to/oan4/1AXAA00043
• 21mm Socket 1aau.to/oan4/1AXAA00043
• 32mm Socket 1aau.to/oc7/1AAST00003
• Trim Tool Set 1aau.to/oahS/1AXXX00006
• Pliers
• Push Pin Pliers
• 1/2 Inch Impact Gun 1aau.to/ovh/1AXAA00252
• 3/8 Inch Impact Gun
• Socket Extensions 1aau.to/obFu/1AXAA00015
• Torque Wrench 1aau.to/oaNj/1AXAA00044
• Copper Anti-Seize
• Cotter Pin
• Gloves 1aau.to/oaoU/1AXSS00048
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oacn/1AXAA00068
• Jack Stands 1aau.to/oZd/1AXAA00065
• Ratchet Strap
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video

[@victorhoyt4352]

For anybody watching this video, you do not have to remove the tie rod end or the lower ball joint to do this job. Just undo the 2 strut bolts and swing it down, and forward.

[@yunshottasim6a503]

Can we please do more on the maxima?? this has to be the best car video I 've ever seen...

[@DH-rt3fk]

This is the best video I've come across for the Maxima. I have to do mine today and all the other videos have poor angles or poor explanation. You rock, thank you. And the timing was just perfect.

[@mr.hundreddollarbill9333]

This chick does not need any power tools. Look at those muscles on their forearm. She could probably beat Popeye arm wrestling

[@MIstastacks24]

This chick gets busy baby!

[@MegaOliver46]

Nice! Thanks!!!

[@World_traveler287]

Wow! You rock!!!

[@actionjohnny93]

Would you need to do an alignment after this?

[@scottconoryea7961]

Was this in real time?

[@MIstastacks24]

Give it a thumbs up for more maxima videos.

[@DH-rt3fk]

Put your lug nuts on to protect the threads when tightening the axle nut