How To Replace Radiator 2005-10 Volkswagen Jetta
Vložit
- čas přidán 15. 11. 2021
- Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1ARAD00928
Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle. This video shows you how to install a new TRQ radiator in your 2006-2010 Volkswagen Jetta.
• Check here for more videos on the 2006-2010 Volkswagen Jetta: • Volkswagen Jetta 2006-...
This process should be similar on the following vehicles:
2005 Volkswagen Jetta
2006 Volkswagen Jetta
2007 Volkswagen Jetta
2008 Volkswagen Jetta
2009 Volkswagen Jetta
2010 Volkswagen Jetta
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Socket 1aau.to/oa/1AXAA00017
• 16mm Socket 1aau.to/oa/1AXAA00015
• Trim Tool Set 1aau.to/oa/1AXXX00006
• T20 Socket
• T25 Socket 1aau.to/oa/1AXAA00008
• T30 Socket
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Volkswagen Jetta 2006-2010 5th Generation: • Volkswagen Jetta 2006-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Thanks! I am replacing the condenser on my 2008 Passat and couldn't find anything on getting to it. While not the same car, it was very close and this was so helpful!
I want to thank for such a great video I have been working on cars for the last 25 years but don’t do many VW and I wasn’t sure how and found your video and I was able to do it
I would like to thank you for sharing a great video
I need a core support replacement and needed to learn how to remove the radiator housing/condensor from it. Thank you so much for this video! Wish it was a little bit more specific because I am still not sure of how to remove the core support from the radiator/condensor.
Great job my husband do the job watching you video thank you so much we save a lot of money
The hand wave in the bumper cover reflection at 4:46 tho? Priceless 🤣😂🤣😂
A few weeks ago I did something similar to this to replace my reciever drier and i wish I had found this video then. Im gonna have to do it all over again since my bumper isnt lined up properly and the radiator fan now hits on my engine and makes a very loud noise with the ac on, this video will be very helpful.
Thank you TRQ, great presentation.
Thanks, great video and got job done from watching!!!! Very helpful to say the least.
A hand of a matchless technician.. you’re special bro I confess.. your video actually supported me replacing the motor fan for my sweet Jetta2010 .. and I finally replaced it.. after a while of suffering☺️.. I appreciate your great efforts to support us with those videos. Thanks
Thanks.. Pro tip- rotate the sensor so you can get the clip without breaking. I find it easier to pull the hose off, you can direct it into a bucket better. Spray & spray you dont dont get soaked otherwise
Great work 👏 👍 👌 thanks so much 🙏 👍.
How you remember everything.....wooowww congratulations 🎊
I will fix same thing on my mk5. Does the coolant needs to get bleed?
Where you located I need mine done. Great video
Do you need to fully take off bumper to do this? Or does it make it easier
Anyone know the size or part number of the T30 screw that is removed at the 8:47 mark? I somehow managed to lose that screw in the process and it seems pretty critical as it screws into the radiator support mount. Thanks! Great video btw!
Does this apply to a 2006 GTI?
Will this work for the golf 2.5 5 cylinder as well?
+Max Novo The installation should be similar for your vehicle.
If you do this job and don't have a lift put the fans in and bolt them on when you put the radiator support in it's much easier
No wonder I always have missing/broken pieces when they do work like this on my car! Every single time I go to my mechanic, screws and little broken things under the hood.
What what is the connector for next to the airbag sensor connector?
Hood sensor
Where is intercooler for this car?
Holy crap! No wonder labor cost is crazy on this job.
Is there a tool list anywhere on this video?
Pretty much t20 torx t30 torx and 16mm socket 😂 Volkswagens are easy that way ❤
Do you not need to burp the radiator after disconnecting it all?
No you don’t. Volkswagens automatically do it, but you gotta run it to operating temperature fill it while running then shut the car off let it cool check it again top off if needed and you should be good
Does this work for a 2008 r32?
+@downedyomomma5945 The installation process should be very similar.
This is a tdi?
No, this is a 5 cylinder gasoline
I need a someone in jersey for my mk5
So what your saying is, sell the POS, and get an American car?
Done. 👍