I took my carbs out last Wednesday and rebuilt them watching your video. I am installing them tomorrow. So say a prayer and cross your fingers for me. Thanks
I'll be doing more with this bike including a paint job as the year goes on...got to wait till after April to do the paint though cause I'm taking a couple week trip in April so funds for the trip come first
@@shuttersplainin8728 I just bought a 2006 royal star venture. Since I’m in NY, I have another 4 weeks or so until I can ride it home. Your channel and videos will get a thumbs up from me… also I subscribed. There seems to be few channels that look at the second Gen ventures. I will watch this video many times and I will be sharing with my friends. I fear that I am going to have to follow in your footsteps.
@Sam {the original Classic} awesome! Your feedback is always welcome! If you have any questions feel free. I'll be adding more videos soon on this baby!
@Sam {the original Classic} awesome! Your feedback is always welcome! If you have any questions feel free. I'll be adding more videos soon on this baby!
Gonna do mine soon, I've ordered an upgraded kit from Ivan's tune products. It's supposed to make more power and improved throttle response. The people I know of who have used it says it makes the bike accelerate much faster.
Hi just found your video about the carburetor, can you please tell when you went on amazon, what did you put in for the search criteria, as I am trying to fix my carburetor on my royal star. Oem parts cheers brian
My buddy's RSV has the exact symptoms. Idles on choke but even the slightest roll of throttle kills it. Did you find one carb was worse, or all plugged or just did them all since you had them out?
In the end all 4 floats were sticking but I did find 1 jet that was clogged completely...I recommend buying the FULL rebuild that includes the jets and needle and everything
She runs like a dream now just make sure he gets a synced gouges set so they are synced properly...mine ended up being a tiny bit over 2 turns from seating
Yes in each Carb, I don't know the name either...remember though the first time I did them I did not have the FULL rebuild kit it was just a partial so the second time I ordered the full kit and it came with everything and then they worked cause I had a clogged jet
Hello. I have a bike like that too. Yamaha xvz 1200cm 1986. I would like to ask where you ordered the carburetor renewal kit. Could you send me the link..Thanks.
Did you get it fixed. Or did you have to take it to a shop. I have the same carburetor repair kit on my table as I write this. When I turn on the bike it starts leaking gas from the tube by the left air filter.
I did fix this...sounds like you got a float sticking just like I did...clean and rebuild all 4 as shown...make sure you get a tuning gauge kit for 4 carbs also...when you put it all back in turn tuning screws 2 times from seat...you may have to adjust about another half a turn after it's on but your tuning gouges will help you know that...also do not turn petcock full open on.
Just a question, on the carburator sinking screws, that little nozzle right next to the screw, is that we’re I would connect the lines for the carburator synchronizer. Thank you I just went over your video again😂. God bless you and your family, and have a blessed Sunday.
@djlcfpana1 no you will have a little nub with black caps on each carb and those are what you put the syncing tubes on, and then put back the caps when your done
I took my carbs out last Wednesday and rebuilt them watching your video. I am installing them tomorrow. So say a prayer and cross your fingers for me. Thanks
You got this!
@@shuttersplainin8728 she's running. Couldn't test ride her because it was raining. She's not leaking. 👍
Sounds Sweet!
You got me hooked now. I gotta watch the whole rebuild.
I'll be doing more with this bike including a paint job as the year goes on...got to wait till after April to do the paint though cause I'm taking a couple week trip in April so funds for the trip come first
@@shuttersplainin8728 I just bought a 2006 royal star venture. Since I’m in NY, I have another 4 weeks or so until I can ride it home. Your channel and videos will get a thumbs up from me… also I subscribed. There seems to be few channels that look at the second Gen ventures. I will watch this video many times and I will be sharing with my friends. I fear that I am going to have to follow in your footsteps.
@Sam {the original Classic} awesome! Your feedback is always welcome! If you have any questions feel free. I'll be adding more videos soon on this baby!
@Sam {the original Classic} awesome! Your feedback is always welcome! If you have any questions feel free. I'll be adding more videos soon on this baby!
Gonna do mine soon, I've ordered an upgraded kit from Ivan's tune products. It's supposed to make more power and improved throttle response. The people I know of who have used it says it makes the bike accelerate much faster.
Definitely good to know..let me know how it turns out
Don't stop keep going all for women's rights , you are doing well, attentive, clean , organized be safe keep riding
What rights do men have that she does not?
i just fixed a v star 650 and i had some of same problems it turned out to be float leavels worked on it a couple of weeks
Dont give up 😊
I'm too stubborn and hard headed to give up 😆
Hi just found your video about the carburetor, can you please tell when you went on amazon, what did you put in for the search criteria, as I am trying to fix my carburetor on my royal star. Oem parts
cheers brian
I put in my exact year, make and model and engine size in the search and also the vehicle profiles...and it will tell you if it is compatible or not
@@shuttersplainin8728 many thanks for getting back to me ,I will do what u suggested,
Always start with a new fuel filter and work through the system.
It was the carbs but yes a new fuel filter was also added eventually
My buddy's RSV has the exact symptoms. Idles on choke but even the slightest roll of throttle kills it.
Did you find one carb was worse, or all plugged or just did them all since you had them out?
In the end all 4 floats were sticking but I did find 1 jet that was clogged completely...I recommend buying the FULL rebuild that includes the jets and needle and everything
She runs like a dream now just make sure he gets a synced gouges set so they are synced properly...mine ended up being a tiny bit over 2 turns from seating
At 22:02, can’t recall the part name, but is there a tiny rubber oring in there lol?
Bumping for possible quick response TIA!
Yes in each Carb, I don't know the name either...remember though the first time I did them I did not have the FULL rebuild kit it was just a partial so the second time I ordered the full kit and it came with everything and then they worked cause I had a clogged jet
Hello. I have a bike like that too. Yamaha xvz 1200cm 1986. I would like to ask where you ordered the carburetor renewal kit. Could you send me the link..Thanks.
You can find all older bike parts on ebay or go directly to yamaha online
Snap ring
Did you get it fixed. Or did you have to take it to a shop. I have the same carburetor repair kit on my table as I write this. When I turn on the bike it starts leaking gas from the tube by the left air filter.
I did fix this...sounds like you got a float sticking just like I did...clean and rebuild all 4 as shown...make sure you get a tuning gauge kit for 4 carbs also...when you put it all back in turn tuning screws 2 times from seat...you may have to adjust about another half a turn after it's on but your tuning gouges will help you know that...also do not turn petcock full open on.
@@shuttersplainin8728 Thank you.
Just a question, on the carburator sinking screws, that little nozzle right next to the screw, is that we’re I would connect the lines for the carburator synchronizer. Thank you I just went over your video again😂. God bless you and your family, and have a blessed Sunday.
@djlcfpana1 no you will have a little nub with black caps on each carb and those are what you put the syncing tubes on, and then put back the caps when your done
I noticed it's mostly girls that has the patience to rebuild carbs. I know. A girl rebuilt my carbs on my 04. Ride Safe!
Aok
Micro needle nose pliers