Red W124 - KE-Jetronic fuel distributor tear down
Vložit
- čas přidán 22. 08. 2024
- For the manuals in this video and the places to buy the kits:
K-Jet speclialists (Australia) k-jet.biz/rebu...
CIS-Jetronic (USA) cis-jetronic.c... - Auta a dopravní prostředky
I was happy when i saw this video is 24 minutes long but it ended so quickly. Glad to see it's still perfectly good to rebuild.
Bekir Karakulak 24 minutes of video took 2 hours to process on my computer then took youtube 4 hours to process after uploading. Now you see why most videos of mine are only a few minutes long. Even that takes ages 😂
I used the exactly same manual(precision machinery) to rebuild mine 4 years ago. I was happy to find it online for free 😄
I think this is one of the most difficult services at these cars, as most mechanicists doesn't even know about It, at least here in Brazil...
Vini if, you wanted a mechanic to rebuild your fuel distribuitor, i'm rear!
My contact, with whatszap, and telephone, is in description on my videos. Att Mike 11 94653 0944, thanks
@@mikebrozio obrigado, sou do RJ, vou anotar teu número pra quando precisar, abraço!
I really appreciate the time that you take to post these videos of your builds. They have helped me massively with me C126 restoration. And with regards to people saying "you done this or you done that wrong" ignore them, you do you and you do it well. Everyone is a master mechanic from behind a computer screen it seems. Regards from the UK ;)
Thanks so much, very nice vídeo
Excellent tutorial, thank you for sharing the details.
Best vídeo on KE-jet I've ever seen
I once tried to rebuild my spare 280 SE W126 fuel distributor and I sort of underestimated the job... I split the unit apart by gently pushing a thin screwdriver around which caused a minor dent on one of the chambers and I somehow managed to break one of my ceramic plates. I put it back together just wondering what would happen and installed it into my car and as soon as I jumped the fuel pump relay the distributor would just scream. I sold the car with the working unit, now I have my old distributor laying around and no use for it. It seems difficult to find people in germany who are interested in spare parts for these.
Phil J. Meyer absolutely essential to have a good read of these manuals before hand - it specifically forbids using a screwdriver to separate the halves for this reason.
Really appreciate your video ! Nice if you make one on reassembly :)
per-christian O I probably will. I’m just dreading the arm chair experts surfacing and saying you should have done this and you shouldn’t have done that ;)
hi have one of these fuel distributor for my audi 90 2,3e , what i like to know is there a sping in the center plunger as mine came dismantaled ? im thanks for showing us how to repair .
Thank you ! Great video !
Good morning, can you tell me where you bought the control piston. I can't find it, I only find them together. Thanks.
Those Salvox rebuild kits are stupid expensive considering much of the kit is cheaply available orings but despite the high cost they don't include the central filter. Do you know where replacement filters can be obtained?
Nice work, Sir !!
I need to replace the fuel distributor of my 1993/95 w124. Do you have any for sale or could you please refurbish mine?
Is there supposed to be a spring inside the barrel after you remove the plunger?
i cant speak for all versions, but on this one, no. There are global experts on other versions on BOSCH CIS K-Jetronic Tech group on facebook. They will probably laugh at my half assed rebuilds, but they work 😅
Awesome video I know what I’m doing next!, I get the point of the reseal of the diaphragms and what nots, What is the symptom when one cylinders is way out of adjustment
1995bulldog if one cylinder is badly enough out of adjustment you can literally hydro lock the engine and bend a connecting rod. This exact thing happened to a 6.9 in perth where the owner fiddled with something he didn’t quite understand. K-jetronic has no issues delivering a ton of fuel. Obviously if its too lean that cylinder will misfire etc. it is possible to balance the system with graduated flasks but i have never done this.
@@MMWA-DAVE It can cause a rich misfire as well and uneven running. Jump the fuel relay and press the plate gently with all the lines off the distributor. See if one is welling up faster than the others. You can get in the ball park this way but you need to measure more volume/time to be precise. Mine was misfiring on accel, turns out #4 was fouling. Found when iremoved fuel lines off dist. i had fuel welling up in #4 port. Rebuilt distributor based on the precision machinery kit and problem solved. Going to do this test going forward on all cis cars I work on with fuel issues or roughness.
Hi sir. I have a question. Currently been working on a 190e with m102. It has a problem after engine warm up phase, the engine will dies off and unable to start. Need to throttle to keep it alive. Is it because of a bad fuel divider sir?
Have you tested the oxygen sensor? Another possibility, it may be running only with the cold start enrichment due to a major vacuum leak and when at operating temperature its too lean. You can also unplug the EHA valve and see if the engine runs while hot to see if its ecu causing it due to some other electrical issue or failed sensor.
Peace be upon you, I have a problem with the Mercedes W201 2.5 when changing the engine oil, it changes color in 40 km from black to black
Bamou Rachid 2.5 litre in the 201 can be diesel or gasoline so im not sure what engine you speak of. You may just need to use an engine oil with more detergents. Back when i had my 6.9 i used to not like the oil going black so quickly so ended up running GTX diesel oil which solved the issue. Diesel oil in a gasoline engine can dislodge carbon deposits and cause catastrophic failure so its a risky business on a carboned up engine. Note that modern diesel oils are more suited to modern diesels with different/ less additives. Old diesels are better with old school diesel oil from back when they were current.
The diesel engine stadium and change the oil 15w40 and 10w40 and the oil does not decrease and there is no smoke the problem is the color change quickly
Bamou Rachid interesting. If no smoke and no consumption you have a healthy engine. I’d not be too concerned about it getting dark. I’d just be changing it every 5000km. I think its pretty normal for diesels to get dark oil quickly.
Stupid obvious question but why didn't you clean/soak in petrol?
i find acetone dissolves varnish and other fuel deposits fantastically. Plus it doesn’t stink anywhere near as much and I like to work inside the house.
@@MMWA-DAVE Ah! thanks. I'm only watching because I have my eye on a 190 and doing a bit of prior research to see what I might be getting into! Just watching your follow-up video now...
Где взяли рем комплект на дозатор. И плунжер?
You need some 2+2 gum cutter
👍👍👍
Repair kits complated for sale?
theyre on ebay, search by bosch part number of fuel distributors
@@MMWA-DAVE Thank you very much for the quick reply. Fuel comes out all the time when the ignition is turned on. how should i set this up?
@@wastimefal9463 if the piston is all the way down you probably have a torn diaphragm
My w124 will not rev past 1000rpm HELP ME 😂
Taysaan Smith Aquarious Edwardo Edwards what happens after 1000rpm?