Nice video. I just did my Audi 2002 A6 Quatro passenger side. I didn't have to remove any control arms. It seemed impossible, until it wasn't. Removing the rotor, caliper, and backing plate on my second attempt helped greatly.
@@antoniowakardo7280 it's for tightening not loosening. It will break and in the future it won't give you a reading and you'll snap a bolt off one day while rebuilding something. Talking from experience. Which is also why i keep my torque wrench inside the box away from my mate who thought it was a breaker bar.
Domnilor measi dori sa vad cum o demontati de la inceput decind dati roata jos si pina la montare in napoi daca se poate .eu am fieat mareia weecend anul fabricatiei 2000 benzina 1.6 mear placea sa vad cum se demonteaza la fiear
Witam, nigdy nie odkręca się śrub dokręconych, kluczem DYNANOMETRYCZNYM, w najlepszym wypadku go rozkalibrujesz a w najgorszym popsujesz lub złamiesz, taki klucz jest przeznaczony tylko do dokręcania śrub odpowiednim momentem a nie do jednego i drugiego.
Thats the first time i saw someone loosen lug nuts with a torque wrench. After one such operation you can throw it in the bin. Not worth anything anymore.
Oh, really? So a torque wrench is something you use to hang it on the wall among the pictures and praise it. Tell me, smaetass, why cant you loose a nut yhatbhas been tightened at 200 nm with a torque wrench designed to measure up to 500 nm torque?
Me a dañao el cerebro 1 aflojando los tornillos con la dinamometrica tiene que estar súper calibrada jajajajajaa Como romper la herramienta de precisión El gato es súper seguro para estar trabajando en la Homocinética El video más malo del año jajajajajajaja
You are doing it wrong. 1 try to lose the wheel bolts pushing from up to down. 2 do not use your torque wrench fir that. It will de calibrate, or wear and become useless. Whenever you need to use force, use a fixed wrench.
Va multumesc din suflet pentru orice lucru pe care milati aratat pina in prezent
To jest przyklad jak sie tego nie robi!
Super filmik. Dawno sie tak nie usmialem.
Właśnie chciałem napisać ze inspektor bhp miałby co robić.
Nice video. I just did my Audi 2002 A6 Quatro passenger side. I didn't have to remove any control arms. It seemed impossible, until it wasn't. Removing the rotor, caliper, and backing plate on my second attempt helped greatly.
NEVER EVER use a torque wrench to loosen bolts. You'll mess up the calibration.
A torque wrench is ONLY used to tighten bolts.
Why not?
100% wright
Who knew you needed a different torque wrench for links / left threads... (Hint: You don't.)
@@antoniowakardo7280 it's for tightening not loosening. It will break and in the future it won't give you a reading and you'll snap a bolt off one day while rebuilding something. Talking from experience. Which is also why i keep my torque wrench inside the box away from my mate who thought it was a breaker bar.
@@pingo9105 Really? Who told you so, smart ass?
Pas de commentaire merci beaucoup bonne travail
Hallo super mehr Touran Videos :-)
Super,Labombastic,Fantastic,Školastic!!!👍💪🤘👏👐👂🤝👌😍🏍️💓🫀⛱️🏖️🏜️🐢🌴🦏🐘🦪🐙🦑🦀🦞🦐🐡⚓🫁👀🔥💯🏊🚣🏄💥💦
Domnilor measi dori sa vad cum o demontati de la inceput decind dati roata jos si pina la montare in napoi daca se poate .eu am fieat mareia weecend anul fabricatiei 2000 benzina 1.6 mear placea sa vad cum se demonteaza la fiear
I would use a floor jack and good old jack stands.
Just sayin.
You dont use a torque wrench to break the nuts/bolts use a breaker bar
Witam, nigdy nie odkręca się śrub dokręconych, kluczem DYNANOMETRYCZNYM, w najlepszym wypadku go rozkalibrujesz a w najgorszym popsujesz lub złamiesz, taki klucz jest przeznaczony tylko do dokręcania śrub odpowiednim momentem a nie do jednego i drugiego.
Niezly rzeznik. Podziwiam za determinacje ale mogl chociaz oznaczyc polozenie 3 srub na wahaczu i nie misialby ustawiac zbieznosci.
It's the same with octavia 2 from 2008?
Speed but courageux 👍🏼
98 model laguna 1 var sol akis daima yerinden çıkıyor bunun için ney yaptırmalıyım bana tamirci sarzıman kapağının deyişmesi lazım diyor
Zdravim, akú veľkosť imbusu ste použil na poloos?
good job
Nice vid man.
Good 👍🏻
Torque wrench to remove wheel lug bolts. Nice…
Salutare...partea care a rămas în cutie cum se scoate pentru a schimba semeringul din cutie unde intra planetara că nu iese....?!
El torquimetro no es para aflojar.
missed half the important bit like how to break down and reasemble the cv joint and boot.
Muito bom
Thats the first time i saw someone loosen lug nuts with a torque wrench. After one such operation you can throw it in the bin. Not worth anything anymore.
Oh, really? So a torque wrench is something you use to hang it on the wall among the pictures and praise it. Tell me, smaetass, why cant you loose a nut yhatbhas been tightened at 200 nm with a torque wrench designed to measure up to 500 nm torque?
Good
Маладес
Changing mine next week, do you have to get the wheel Alignment after?
No.
Using dynamometric key to remove wheel nuts... that's tells me everything...😁
No, thank you.
Who cares. You sound like a right pedant.
@@bEEBO178It should only be used to torque.
Tak potem vw turan 1.9 105km pod sie zawsze hip biopaliw
Video informativ...bine nu e service✌
👌✋
Hi I have a one complen from indea to Skoda Octavia model 1.9 TDI 2005
Touran without ABS?
Abs sensor its located on rear right wheel.
Me a dañao el cerebro
1 aflojando los tornillos con la dinamometrica tiene que estar súper calibrada jajajajajaa
Como romper la herramienta de precisión
El gato es súper seguro para estar trabajando en la Homocinética
El video más malo del año jajajajajajaja
dobra robota
у него порогов нет, за то есть динамометрический ключ))))
Waw
Please buy a breaker bar.
Never ever use moment wrench for undo wheel bolts.
Ein Drehmoment ist nicht zum lösen von Schrauben gedacht!
No coment.
Ако може натписите да бъдат на български
You did not show the most interesting step of the job itself
Dea hod ka aunung dea Bastler
You are doing it wrong.
1 try to lose the wheel bolts pushing from up to down.
2 do not use your torque wrench fir that. It will de calibrate, or wear and become useless.
Whenever you need to use force, use a fixed wrench.
Ei kai tuo momenttiavaimella mee aukomaan, sökö momentti. ja napamutteri muka tuommosella avaimella naputellaan, ei helevetti
Top👈👈👈👈👍👍👍👍👍👍
Se smolli bulloni testina si sposta la convergenza.. sbagliato..
Amatér!
No......................
już wiem dla czego naprawy za granicą są takie drogie. bo banalne rzeczy są robione w niewłaściwy sposób
Got 30 seconds in and watched you use a torque wrench to loosten the wheelnuts. Yeah, nah, bye.
😰
Rezavé plečky😂😂😂
Ese wey ni usar herramienta sabe
J
⁹
Hjy4
Колхоз сервис,категорически нельзя отворачивать динамометрическим ключём.
El video más malo del año
Rrqq=$!!
Динамометричнским ключом срывать болты? Ой дурак
good job