Video není dostupné.
Omlouváme se.
Hanover Deric+ / Eric+ (How To Upload Destination File, No Keylo)
Vložit
- čas přidán 1. 06. 2020
- This video shows how to upload your own destinations to a Hanover Deric+ or Eric+ controller quickly and without the Keylo and Base Station.
USB / R232 cables can be purchased on eBay for around £5
Hanover Helen 3 Download:
wmbusphotos.com...
Feel free to request any other Hanover tutorials in the description. Thanks.
I work for Hanover and always nice to see them in the wild and not in a bus :)
Thanks buddy! Plenty of us keep a few for ourselves! Great fun to experiment with!
@@NC-002 yeh they seem fun...someones made a mario slideshow on one recently...working hard as always ha
Great video, if only I had found a video this simple years ago when I got mine. I dribbled through manuals before finding out how to do this...
Ruvaneth Unys Photography & Video glad you found it simple! There wasn’t many videos of how to do it clearly on CZcams so I thought make something clear and simple for new time Hanover users
Great video mate - it really helps me to upload all data without keylo (which could be very difficult to get one now!)
HI, link is dead, please reload link of helen installer! thanks in advance
Great video. I'm from New Zealand
Thank you!
cant download the software, the link up there doesnt have any download link, can you help us?
Hello, fantastic videos on the Hanover Display. Just subbed!
I have an Eric + and have read the manuals inside out, I can not for the life of me get the display upon power up to dislay the last used destination.
What am I missing?
Is there any tutorial how to upload with key-lo on deric+ ???
Great video, very informative :)
Thanks mate!
Hello, Great video. I need some help with it, could you please help me with assembly connections? I have the dots panels and derick+, but not sure how power it on.
power on the 3 pin plug, left is positive middle is ground, on derik, same for panel, pos and ground, and com port is other 2 pin plug. important at least 19vdc power required. just assembled mine today
czcams.com/video/DZdEKYEQ3sA/video.html
Good day. Very good video. I would like to ask you for help. I found a thread on the Internet about the software you are talking about, but all the links there have not worked for a long time. Could you help me get this program?
Hello. Can you help me to send data to Hanover DRS?
If you only have a Deric+ controller in hand (from a retired bus) and without any .BIN file, can you export the DB back into Helen for editing i.e. the reverse of what you'd be doing?
Good question, I’m not entirely sure, but surely there must be some way to
Any ideas what the deric and the sign draw in terms of power? I know they’re both 24v but how many amps?
I believe the minimum they can have is 18V but they’re usually best with 24V, can’t say I know much about electricity but I think the PSU says 2 Amps
Hi there, very helpful but I have one question,
After pressing 'Load data' on the controller do you have to press the 'send output file' button on the laptop? Or does it automatically start transferring over after you press 'Load data' on the controller?
Hi, once you press Load Data, it’ll transfer it automatically.
@@NC-002 Ah ok, Cheers
Where can you get the software for them using a DG3 controller
DG3’s use the same software as the Deric/Eric,
@@NC-002 I was meaning where can you find the software
@@madjock7784 if you have Facebook, there’s a group I run called Destination Display group, there’s download links for Hanover software in there.
If not try Googling it, there’s a forum somewhere with a download for an older version
@@NC-002 applied to it
What driver do you have for the USB/Serial cable?
If you use it with your computer whilst on the internet, it should download them automatically
@@NC-002 it’s showing on my computer as a CH340 driver
How do I get the software?
There’s a forum thread somewhere on the internet with download links for this and Mobitec displays
Google it and it’ll be somewhere or other
where can i get a controller and display? wanted one for ages
eBay is the easiest but they're usually expensive, just approach an operator or ask around like I did.
Try some preservation groups, they might sell equipment to help raise funds! I got a full set of hanover flip blinds cheaply through a local group!
Ruvaneth Unys Photography & Video exactly! I got my flip dots for free just because of social connections, and for the same reason I got a SIGNIFICANT discount on my LED!
@@NC-002 Agreed, knowing the right people always help. I have about 5 sets of blinds and a working (manual) blind box I got free from multiple sources. Just ask around, worst anyone can say is no!
Ruvaneth Unys Photography & Video wow! Would love to see some photos of them sometime! You got Twitter or anything?
.