Hi, i am trying to get the dest to show bus reversing when you go into reverse, do you know the settings on how to do this through the sign config please,
hi I have hanover Deric DG3 Driver Controller I've tried uploading routes onto a usb stick and iv'e inserted it into the driver display and it says not usb detected not found Eric.bin remove usb drive help please
+neil dodd I have no idea about this, sorry :( have you tried emailing hanover displays themselves. they could be of good use. Hope this helps: www.hanoverdisplays.com/contact-us/
I know you dont live in the north east but could you please do a blide for arriva north east sapphire service 7 the rout goes Darlington north road harrogate hill aycliffe village newton aycliffe woodham chilton ferryhill durham gate and nevills cross then ends the route in durham bus station would be very greatful.
Hello . I am altayeb and I work in a transportation company and specialize in programming screens from Hanover Displays. I want you to help me how to program it
hi i got the software but when i try to do screen parameter is comes up with something 32 error and shuts the application down when i select external led
Have you tried running the program as an Administrator? Perhaps there is a few files that could be missing. Are you running a 64-bit or 32-bit operating system? Rob
hiya i have contacted your facebook page and this is the reply i had "Hello Konrad. Thank you for contacting On The Shires Buses. An admin will be with you shortly" and since then nothing :(
Hi there. It is not currently possible for it to align route details to the left im afraid. The only way it can be done is through editing all the fonts in the font editor before using the rectangle tool to select and drag the fonts, it will have to be done on every rotation. If you are on about the route number itself, that can be done in the sign configuration. Hope it helps RA
Hi, where do i download Helen Sogn editor from???
Is there anywhere online I can download bitmaps suitable to import to Hanover? I’m trying to get a rugby ball
Do you know how to make the display go while like on a E200/400MMC
Hi, i am trying to get the dest to show bus reversing when you go into reverse, do you know the settings on how to do this through the sign config please,
hi I have hanover Deric DG3 Driver Controller I've tried uploading routes onto a usb stick and iv'e inserted it into the driver display and it says not usb detected not found Eric.bin remove usb drive help please
+neil dodd I have no idea about this, sorry :(
have you tried emailing hanover displays themselves. they could be of good use. Hope this helps: www.hanoverdisplays.com/contact-us/
When you have made them all how do you upload them to the bus
Would you be able to send me the software or a link to it? Thanks
hi i found out why it didnt have a folder called HANOVER Then another folder inside called DB and you insert the Eric.bin in the folder
+neil dodd ah, well glad you fixed it :)
hope you find these tutorials helpful and another one will appear soon (just encoding now)
I know you dont live in the north east but could you please do a blide for arriva north east sapphire service 7
the rout goes
Darlington north road harrogate hill aycliffe village newton aycliffe woodham chilton ferryhill durham gate and nevills cross then ends the route in durham bus station
would be very greatful.
Hello . I am altayeb and I work in a transportation company and specialize in programming screens from Hanover Displays. I want you to help me how to program it
hi i got the software but when i try to do screen parameter is comes up with something 32 error and shuts the application down when i select external led
Have you tried running the program as an Administrator? Perhaps there is a few files that could be missing. Are you running a 64-bit or 32-bit operating system?
Rob
not sure
+Dylan_Jenno Try running HELEN as an administrator [RMB on HELEN and then Run as Administrator] and see if it works
RA
What document did you use cuz when I click use it comes up with my documents
sorry for the late reply. you need to create new folder and the database needs to be inside there
Oh ok thanks! =) np
how am i downloading the programme?
i clicked "File, New" and files come up but theres nothing in them what do i do? Were did you get the test from/ can you help me please?
You need to create a new folder [which stores the DB], and inside that folder, give the DB a name. Should send you to the sign config
after save and exit what do you do? do you just go on omsi a and put the destination code in?
Please feel free to message our Facebook page and we'll be able to help you some more there
Thanks, Joshy
hiya i have contacted your facebook page and this is the reply i had "Hello Konrad. Thank you for contacting On The Shires Buses. An admin will be with you shortly" and since then nothing :(
We have since replied. Sorry about all of this Konrad. Rob should be able to deal with this in the morning :)
Josh
Can you use twitter instead?
How do you change the color of the display from orange to white?
you buy white or orange, it's not multicolor
@@olskutsuikkeli but there is a multi-coloured version
hi, does anyone knows how to align the route details to the left instead of middle? thanks in advance
Hi there. It is not currently possible for it to align route details to the left im afraid. The only way it can be done is through editing all the fonts in the font editor before using the rectangle tool to select and drag the fonts, it will have to be done on every rotation.
If you are on about the route number itself, that can be done in the sign configuration. Hope it helps
RA
oh ok.... anyway, thanks for the reply!
On The Shires Buses do you have a Facebook page
Hello, this was really helpful, thanks!
Arthur turnip 😂
сегодня такой дисплей настраивал в Volvo. получилось не сразу, но получилось
Hi!
What is the intro song?
uptown funk by mark ronson ft bruno mars
Why I not Super-X
one bad point way to fast ...but great video apart from that
Too fast..
Hi!
What is the intro song?
Uptown Funk by Bruno Mars