LT-4LDS-V2 Laser Tree's Powerful 20W Optical Power Laser Module With Air Assist
Vložit
- čas přidán 8. 07. 2024
- #diy #laser#lasermachine#lasercutting
👇New upgrade and new offer👇
bit.ly/3T9bhgJ
LT-4LDS-V2 is a professional cutting module designed for long-term safe cutting processing. It is the most powerful 20W optical power blue laser head on the market today. Compared with v1, V2 is much upgraded with heavy duty design, easier to use air assist, longer focal length and more stable cutting output power. It can cut 10mm plywood cleanly in one pass at 3mm/s. If you spend most of your work time cutting, choose LT-4LDS-V2 it will be a good companion for you.
------------------------------------------------
SPECIFICATION
Module: LT-4LDS-V2
Laser color: blue
Output optical power: 18-21W
Wavelength: 450nm
Focus method: fixed 40mm
Input: 24V2.3-3.2A
Cuble:3pin 80cm
Weight: 620g
Interface: 2EDG-3.81
Adjustable powe : Support digital（TTL/PWM）and analog modulation
Fan feed:1000rmp
Temperature control: 0-60℃
Protective window lens: Yes ( withstand 1000℃ )
Application: cutting, engraving
------------------------------------------------------------------------------------------------
👇Skip Ahead :
00:00 - Piece head
00:05 - Installation
00:59 - Focusing
01:11 - Software setup
01:25 - Speed test Cutting 10mm plywood
07:12 - Cutting 20mm pine board
07:41 - Cutting 5mm acrylic
08:15 - Engraving 2mm plywood
09:29 - Engraving Stainless steel
10:01- Engraving black acrylic - Jak na to + styl
![Amazing Power - Real 20W Optical Power Laser Module [Cutting Testing ]](/img/n.gif)
Hi
Can you help me please? I bought LT-4LDS-V1 and i want to connect it to Ender 3 s1 Pro. When i connect this laser to printer suddenly main board of Ender died.
I used same laser board as you are, i used only PWM and ground from printer and external power source.
Can you help me with that ?
Is this compatible with Sainsmart Genmitsu PROver V2 ?
Is this work with my creality falcon 10w?
This can cut 0.08mm stainless steel (advertised). Can it cut 0.1mm nickel ?
Can i use this Module on a Atomstack A5 M50 Pro? That would be nice.
Can you do a test in cardboard and double cardboard (like egg box)
Hello I just purchased LT-4LDS-V2 20W laser, for my router table. Could you recommend a software to generate toolpaths ( control laser intensity, currently using mastercam when running my spindle)
LightBurn
Any one know how to wire this with mach3 rnr motion controller?
Can I use on my ortur laser master 2 that was 5w which I have upgraded to 10w???
Of course , it can be very compatible. The 20W module is currently on sale at Lasertree.com, so don't miss this chance to get it for $349.
Laser operation is shown with a standard air compressor? Does it make sense to buy a compressor more powerful than the standard one, for example, an oil-free compressor for 8 atmospheres, or will it not give a significant increase in speed and depth of cut?
I use my Atomstack S10 Pro with a small aquarium 60L/min pump and is better in terms of edge quality. It won't give you any more depth but it's less burnt on the edge is all it does is how I understand it.
I also realized their air assist is 27L/min and not to shoot their price down but my aquarium pump which seems popular with other laser engraver/cutter enthusiasts is under $40 for more air.
Is it compatible with foxalien rezier
Hi, they are compatible.😁😁
po o principal é mostras a instalação do cabos ai não mostra
Can I have this on my ortur laser master 3?
It is compatible with ortur engravers and is plug and play.😃
Is it compatible with S10 and S30 sculpfuns
They are compatible.😀😀
How long is the focal point area?
The focal length of this module is 40mm.
@@Lasertree thank you, can you also let me know the focal depth?
@@sebastianheyn4886 Different materials are set differently when cutting.Uploading images is not allowed in the comments, you can refer to the cutting data by clicking here.bit.ly/3T9bhgJ
Is it compatible to neje max 3?
LT-4LDS-V2 can be compatible with neje very well.
the laser cannot be mounted.. there is no mounting plate. does it have to be bought separately?
@@miuix4795 The adapter board is included in our kits.😁
@@miuix4795 Compared to V1,V2 has a more stable power output, a more user-friendly air nozzle, a longer focal length, a larger fan for better cooling, and a new viewable window design.
@@Lasertree I didn't have the adapter with me. just the laser, cable, board and spacers