hola, que buen video informativo, lo estaba buscando y aparecio Anna Austin,,gracias, abrazos desde Colombia....solicito una ayudita y debo hacerte una pregunta, tu CNC Laser tiene tarjeta base de 12v ó 24v, mira he adquirido el mismo LASER TREE 20W y mi CNC es ATOMSTACK A5PRO, esta tiene tarjeta LaserBox V1.5, de 12v. con esa instalacion que hicisites puedo mover sin riesgos mi CNC ATOMSTACK con el LASER TRE 20W.....
Dear friend, I have a 10W Sculpfun S30 Pro, I recently bought a 20W laser head, it came with the driver, I turned it on as the diagram sent me, but it's not working as I would like. When I turn on the driver key, the laser already fires, scratching the piece, and it also doesn't turn off when the work is finished. Can you help me?
Hello from pakistan, Thanks for an informative video. My LT-4LDS-V2 is on the way .... may be i will get to you if things things don't go well once it is received.
@@annaaustin9617 Hello. I hope this text finds you well. Firstly thanks for your response. English is not my native language, apologies if my explanation is a bit confusing. Actually i had ordered LT-4LDS-V2 and it was on the way. I was going through their product manual and had some confusion regarding focus settings, and had a plan to text you once module have arrived and I am on the way to installing it on my machine. The laser module arrived yesterday, and I am now installing it on my machine. However, now i face more serious issue than only focus adjustment. My machine is not some commercial machine, it is homemade assembly and uses LaserGRBL firmware with arduino uno and CNC shield with NEMA 1.7 stepper motors. Previously i was using OXLaser 5W optical laser and it was running fine. This (OXLaser) laser is operated at 12V. Currently i am stuck, as soon as i connect two pin pwm connection of new laser module with my machine .... i can't connection of laser software from computer. I am using 24V external power supply for LT module. Can i share some images/video of the machine to show the connection ? Bundle of thanks for anticipated help.
@@annaaustin9617 Hello. I hope this text finds you well. Firstly thanks for your response. English is not my native language, apologies if my explanation is a bit confusing. Actually i had ordered LT-4LDS-V2 and it was on the way. I was going through their product manual and had some confusion regarding focus settings, and had a plan to text you once module have arrived and I am on the way to installing it on my machine. The laser module arrived yesterday, and I am now installing it on my machine. However, now i face more serious issue than only focus adjustment. My machine is not some commercial machine, it is homemade assembly and uses LaserGRBL firmware with arduino uno and CNC shield with NEMA 17 stepper motors. Previously i was using OXLaser 5W optical laser and it was running fine. This (OXLaser) laser is operated at 12V. Currently i am stuck, as soon as i connect two pin pwm connection of new laser module with my machine .... i can't connection of laser software from computer. I am using 24V external power supply for LT module. Can i share some images/video of the machine to show the connection ? Bundle of thanks for anticipated help.
@@annaaustin9617 Hello. I hope this text finds you well. Firstly thanks for your response. English is not my native language, apologies if my explanation is a bit confusing. Actually i had ordered LT-4LDS-V2 and it was on the way. I was going through their product manual and had some confusion regarding focus settings, and had a plan to text you once module have arrived and I am on the way to installing it on my machine. The laser module arrived yesterday, and I am now installing it on my machine. However, now i face more serious issue than only focus adjustment. My machine is not some commercial machine, it is homemade assembly and uses LaserGRBL firmware with arduino uno and CNC shield with NEMA 1.7 stepper motors. Previously i was using OXLaser 5W optical laser and it was running fine. This (OXLaser) laser is operated at 12V. Currently i am stuck, as soon as i connect two pin pwm connection of new laser module with my machine .... i can't connection of laser software from computer. I am using 24V external power supply for LT module. Can i share some images/video of the machine to show the connection ? Bundle of thanks for anticipated help.
@@annaaustin9617 hello, i hope this text finds you well. Thanks for your response. Dear, every time i post my question here ... my comment disappears after a while. CZcams is deleting the comment perhaps its a bit long may be.
hola, que buen video informativo, lo estaba buscando y aparecio Anna Austin,,gracias, abrazos desde Colombia....solicito una ayudita y debo hacerte una pregunta, tu CNC Laser tiene tarjeta base de 12v ó 24v, mira he adquirido el mismo LASER TREE 20W y mi CNC es ATOMSTACK A5PRO, esta tiene tarjeta LaserBox V1.5, de 12v. con esa instalacion que hicisites puedo mover sin riesgos mi CNC ATOMSTACK con el LASER TRE 20W.....
Dear friend,
I have a 10W Sculpfun S30 Pro, I recently bought a 20W laser head, it came with the driver, I turned it on as the diagram sent me, but it's not working as I would like. When I turn on the driver key, the laser already fires, scratching the piece, and it also doesn't turn off when the work is finished. Can you help me?
Thank you so much! We got ours connected now 👌. The only other issue if that the module doesn't fire when framing. Did you run into this issue?
I haven't had this problem, did you get yours resolved? Or you could check for loose wiring.
I have a Cronos Maker board so I can't do full power (24volts) do I connect the power cable and leave it connected every time I cut? Thanks
Hello from pakistan, Thanks for an informative video. My LT-4LDS-V2 is on the way .... may be i will get to you if things things don't go well once it is received.
You can contact me with questions about this module. I will be happy to share my experience.
@@annaaustin9617 Hello. I hope this text finds you well. Firstly thanks for your response. English is not my native language, apologies if my explanation is a bit confusing.
Actually i had ordered LT-4LDS-V2 and it was on the way. I was going through their product manual and had some confusion regarding focus settings, and had a plan to text you once module have arrived and I am on the way to installing it on my machine. The laser module arrived yesterday, and I am now installing it on my machine. However, now i face more serious issue than only focus adjustment. My machine is not some commercial machine, it is homemade assembly and uses LaserGRBL firmware with arduino uno and CNC shield with NEMA 1.7 stepper motors. Previously i was using OXLaser 5W optical laser and it was running fine. This (OXLaser) laser is operated at 12V. Currently i am stuck, as soon as i connect two pin pwm connection of new laser module with my machine .... i can't connection of laser software from computer. I am using 24V external power supply for LT module. Can i share some images/video of the machine to show the connection ? Bundle of thanks for anticipated help.
@@annaaustin9617 Hello. I hope this text finds you well. Firstly thanks for your response. English is not my native language, apologies if my explanation is a bit confusing.
Actually i had ordered LT-4LDS-V2 and it was on the way. I was going through their product manual and had some confusion regarding focus settings, and had a plan to text you once module have arrived and I am on the way to installing it on my machine. The laser module arrived yesterday, and I am now installing it on my machine. However, now i face more serious issue than only focus adjustment. My machine is not some commercial machine, it is homemade assembly and uses LaserGRBL firmware with arduino uno and CNC shield with NEMA 17 stepper motors. Previously i was using OXLaser 5W optical laser and it was running fine. This (OXLaser) laser is operated at 12V. Currently i am stuck, as soon as i connect two pin pwm connection of new laser module with my machine .... i can't connection of laser software from computer. I am using 24V external power supply for LT module. Can i share some images/video of the machine to show the connection ? Bundle of thanks for anticipated help.
@@annaaustin9617 Hello. I hope this text finds you well. Firstly thanks for your response. English is not my native language, apologies if my explanation is a bit confusing.
Actually i had ordered LT-4LDS-V2 and it was on the way. I was going through their product manual and had some confusion regarding focus settings, and had a plan to text you once module have arrived and I am on the way to installing it on my machine. The laser module arrived yesterday, and I am now installing it on my machine. However, now i face more serious issue than only focus adjustment. My machine is not some commercial machine, it is homemade assembly and uses LaserGRBL firmware with arduino uno and CNC shield with NEMA 1.7 stepper motors. Previously i was using OXLaser 5W optical laser and it was running fine. This (OXLaser) laser is operated at 12V. Currently i am stuck, as soon as i connect two pin pwm connection of new laser module with my machine .... i can't connection of laser software from computer. I am using 24V external power supply for LT module. Can i share some images/video of the machine to show the connection ? Bundle of thanks for anticipated help.
@@annaaustin9617 hello, i hope this text finds you well. Thanks for your response. Dear, every time i post my question here ... my comment disappears after a while. CZcams is deleting the comment perhaps its a bit long may be.